Mechanistic studies of the isomerization of peroxynitrite to nitrate catalyzed by distal histidine metmyoglobin mutants

Hemoproteins are known to react with the strong nitrating and oxidizing agent peroxynitrite according to different mechanisms. In this article, we show that the iron(iii) forms of the sperm whale myoglobin (sw Mb) mutants H64A, H64D, H64L, F43W/H64L, and H64Y/H93G catalyze the isomerization of peroxynitrite to nitrate. The two most efficient catalysts are H64A (k(cat) = (5.8 +/- 0.1) x 10(6) M(-1) s(-1), at pH 7.5 and 20 degrees C) and H64D metMb (k(cat) = (4.8 +/- 0.1) x 10(6) M(-1) s(-1), at pH 7.5 and 20 degrees C). The pH dependence of the values of k(cat) shows that HOONO is the species which reacts with the heme. In the presence of physiologically relevant concentrations of CO(2) (1.2 mM), the decay of peroxynitrite is accelerated by these metMb mutants via the concurring reaction of HOONO with their iron(iii) centers. Studies in the presence of free added tyrosine show that the metMb mutants prevent peroxynitrite-mediated nitration. The efficiency of the different sw metMb mutants correlates with the value of k(cat). Finally, we show that sw WT-metMb is nitrated to a larger extent than horse heart metMb, a result that suggests that the additional Tyr151 is a site of preferential nitration. Again, the extent of nitration of the tyrosine residues of the metMb mutants correlates with the values of k(cat).     

Halide-free dehydrative allylation using allylic alcohols promoted by a palladium-triphenyl phosphite catalyst

The triphenyl phosphite-palladium complex was found to effect catalytic substitution reactions of allylic alcohols via a direct C-O bond cleavage. The dehydrative etherification proceeded efficiently without any cocatalysts and bases to give allylic ethers in good to excellent yields.     

One electron transfer mechanism in the enzymatic oxygenation of sulfoxide to sulfone promoted by a reconstituted system with purified cytochrome p-450

A kinetic study on enzymatic S-oxygenation of sulfoxides to sulfones was carried out by a reconstited system with purified cytochrome P-450. A linear correlation observed between log(Vmax)'s and the one-electron oxidation potentials of sulfoxides suggests that the oxygenation of sulfoxides proceeds via one electron transfer process to the active “oxenoid” intermediate of the enzyme.     

Determination of chemical form of antimony in contaminated soil around a smelter using X-ray absorption fine structure.

Only limited information is available about the behavior of antimony (Sb) in contaminated soils. However, understanding the behavior of Sb in contaminated soils is important, because the toxicity or solubility of this element depends on its chemical state. In this study, we investigated the levels of Sb and the chemical forms of Sb in the soil around a smelter using X-ray absorption fine structure (XAFS) spectra. The highest Sb concentration in the contaminated soil was 2900 mg/kg dry soil. According to Sb-K edge X-ray absorption near edge (XANE) spectra, the Sb in the soil was in the form of Sb(V) compounds. The similarity of extended XAFS (EXAFS) spectra suggests that Sb speciation was independent of the sampling site, which indicates that Sb or Sb2O3 emitted from the smelter was converted into Sb(V) compounds in the soil.     

Synthesis of novel chitosan resin derivatized with serine moiety for the column collection/concentration of uranium and the determination of uranium by ICP-MS

A chitosan resin derivatized with serine moiety (serine-type chitosan) was newly developed by using the cross-linked chitosan as a base material. The adsorption behavior of trace amounts of metal ions on the serine-type chitosan resin was systematically examined by packing it in a mini-column, passing a metal solution through it and measuring metal ions in the effluent by ICP-MS. The resin could adsorb a number of metal cations at pH from neutral to alkaline region, and several oxoanionic metals at acidic pH region by an anion exchange mechanism. Uranium and Cu could be adsorbed selectively at pH from acidic to alkaline region by a chelating mechanism; U could be adsorbed quantitatively even at pH 3–4. Uranium adsorbed on the resin was easily eluted with 1 M nitric acid: the preconcentration (5-, 10-, 50- and 100-fold) of U was possible. The column treatment method was used prior to the ICP-MS measurement of U in natural river, sea and tap waters; R.S.D. were 2.63, 1.13 and 1.37%, respectively. Uranium in tap water could be determined by 10-fold preconcentration: analytical result was 1.46±0.02 ppt. The resin also was applied to the recovery of U in sea water: the recovery tests for artificial and natural sea water were 97.1 and 93.0%, respectively.     

Isolation and crystal structure of a water-soluble iridium hydride: a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds in acidic media

This paper reports the isolation and structural determination of a water-soluble hydride complex [Cp*Ir(III)(bpy)H](+) (1, Cp* = eta(5)-C(5)Me(5), bpy = 2,2'-bipyridine) that serves as a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds at pH 2.0-3.0 at 70 degrees C. The catalyst 1 was synthesized from the reaction of a precatalyst [Cp*Ir(III)(bpy)(OH(2))](2+) (2) with hydrogen donors HCOOX (X = H or Na) in H(2)O under controlled conditions (2.0 < pH < 6.0, 25 degrees C) which avoid protonation of the hydrido ligand of 1 below pH ca. 1.0 and deprotonation of the aqua ligand of 2 above pH ca. 6.0 (pK(a) value of 2 = 6.6). X-ray analysis shows that complex 1 adopts a distorted octahedral geometry with the Ir atom coordinated by one eta(5)-Cp*, one bidentate bpy, and one terminal hydrido ligand that occupies a bond position. The isolation of 1 allowed us to investigate the robust ability of 1 in acidic media and reducing ability of 1 in the reaction with carbonyl compounds under both stoichiometric and catalytic conditions. The rate of the acid-catalyzed transfer hydrogenation is drastically dependent on pH of the solution, reaction temperature, and concentration of HCOOH. The effect of pH on the rate of the transfer hydrogenation is rationalized by the pH-dependent formation of 1 and activation process of the carbonyl compounds by protons. High turnover frequencies of the acid-catalyzed transfer hydrogenations at pH 2.0-3.0 are ascribed not only to nucleophilicity of 1 toward the carbonyl groups activated by protons but also to a protonic character of the hydrido ligand of 1 that inhibits the protonation of the hydrido ligand.     

Analytical use of a biochemical luminous membrane

Luminous membranes were prepared by immobilizing peroxidase (POD) to collagen matrix. The POD luminous membrane generated luninescence in the presence of luminol and H₂O₂, and the peroxide was determined in the concentration range 10-⁶-10-³ M by following luminescence emitted from the membrane. Glucose was determined using a luminous membrane in which POD and glucose oxidase (GOD) were coimmobilized. The luminous membranes appear to be feasible for the determination of enzyme substrates and enzyme activity.     

Reactivity of hydroperoxide bound to a mononuclear non-heme iron site

The first isolation and spectroscopic characterization of the mononuclear hydroperoxo-iron(III) complex [Fe(H(2)bppa)(OOH)](2+) (2) and the stoichiometric oxidation of substrates by the mononuclear iron-oxo intermediate generated by its decomposition have been described. The purple species 2 obtained from reaction of [Fe(H(2)bppa)(HCOO)](ClO(4))(2) with H(2)O(2) in acetone at -50 degrees C gave characteristic UV-vis (lambda(max) = 568 nm, epsilon = 1200 M(-1) cm(-1)), ESR (g = 7.54, 5.78, and 4.25, S = (5)/(2)), and ESI mass spectra (m/z 288.5 corresponding to the ion, [Fe(bppa)(OOH)](2+)), which revealed that 2 is a high-spin mononuclear iron(III) complex with a hydroperoxide in an end-on fashion. The resonance Raman spectrum of 2 in d(6)-acetone revealed two intense bands at 621 and 830 cm(-1), which shifted to 599 and 813 cm(-1), respectively, when reacted with (18)O-labeled H(2)O(2). Reactions of the isolated (bppa)Fe(III)-OOH (2) with various substrates (single turnover oxidations) exhibited that the iron-oxo intermediate generated by decomposition of 2 is a nucleophilic species formulated as [(H(2)bppa)Fe(III)-O*].     

A GaCl3-catalyzed [4+1] cycloaddition of alpha,beta-unsaturated carbonyl compounds and isocyanides leading to unsaturated gamma-lactone derivatives

A GaCl3-catalyzed reaction of alpha,beta-unsaturated ketones with isocyanides leading to the formation of unsaturated lactone derivatives is described. This is the first example of the catalytic [4+1] cycloaddition of alpha,beta-unsaturated ketones and isocyanides. GaCl3 is an excellent catalyst due to its lower oxophilicity, which is desirable for all of the key steps, such as E/Z isomerization, cyclization, and deattachment from the products.     

Application of water as a solvent in microwave-assisted extraction for analysis of PCBs and CBzs in fly ash

Polychlorinated biphenyls (PCBs) and chlorobenzenes (CBzs) are two classes of dioxin precursors formed in municipal solid waste incinerators (MSWIs); they produce negative health effects similar to those of dioxins. Reducing the analytical time required for determining the concentrations of these compounds in MSWIs is important for quickly evaluating their importance and assessing associated health risks. In the present study, water is used as a safe and environmentally friendly solvent in microwave-assisted extraction (MAE) for PCB and CBz analyses. MAE is compared with traditional Soxhlet extraction (SE) to determine the extraction efficiencies. The evaluation of extraction efficiencies shows that MAE has a high extraction efficiency compared with that of SE when water content is lower than 60%. Furthermore, the extraction time and organic solvent consumption are reduced with MAE compared with SE.