Four-wave mixing based 10-Gb/s tunable wavelength conversion in dispersion-flattened microstructure fibers

All-optical wavelength conversion of 10-Gb/s signal based on four-wave mixing is experimentally demonstrated in a 30-m-long dispersion-flattened microstructure fiber with small positive dispersion. For an average pump power of 26 dBm, the conversion efficiency was around -19.5 dB with the fluctuation less than ±1.4 dB, covering a conversion bandwidth of 20 nm. The eye diagram of the converted signal shows good eye opening.     

Photo-induced effect in the layered perovskite manganite La<Subscript>1.2</Subscript>Sr<Subscript>1.8</Subscript>Mn<Subscript>1.8</Subscript>Co<Subscript>0.2</Subscript>O<Subscript>7</Subscript>

It is helpful to study the photo-induced effect in the perovskite manganites not only for elucidating the mechanism of colossal magnetoresistance (CMR) effect but also for potential applications in technology. The laser-induced effect in the Co doping layered perovskite manganites La_1.2Sr_1.8Mn_1.8Co_0.2O₇, is studied in this paper and the obtained results are also compared with that gained in the Nd-doping manganites with cubic perovskite structure.     

采用Seemann－Bohlin准聚焦X射线衍射仪测量薄膜厚度的误差理论分析

本文从理论上分析了衍射强度比偏差Δ（Ｉ／Ｉ∞）和衍射峰位偏差Δ２θ对Ｓｅｅｍａｎｎ－Ｂｏｈｌｉｎ准聚焦Ｘ射线衍射仪测量表面单层薄膜厚度误差的影响。分析结果表明，降低Δ（Ｉ／Ｉ∞）可提高膜厚的测量精度，在Δ（Ｉ／Ｉ∞）－定的情况下，按μρｔ［Ｓｉｎ（－１）γ＋Ｓｉｎ（－１）（２θ－γ）］＝１选择靶辐射和衍射晶面可使由Δ（Ｉ／Ｉ∞）导致的膜厚测量误差具有极小值；选择高角度衍射线有助于减小试样离焦引起的衍射峰位偏差，亦可降低因衍射角测量偏差导致的膜厚测量误差，当衍射线处于薄膜的法向２θ＝γ＋π／２时，角度项误差（Δｔ／ｔ）（２θ）完全消除。     

基于小波变换的循环伏安弱信号特征信息提取

本研究采用连续小波变换(continuous wavelet transform，CWT)技术处理循环伏安弱信号，通过研究苯酚、对苯二酚和对硝基苯酚的共存体系循环伏安弱信号，表明CWT可以成功地识别出极弱信号中的指纹特征信息，并且经处理得到的对应的小波系数峰比原始信号更窄，更高，由此可以成功地确定弱峰的数目和位置。由循环伏安信号所得的结果，有力地证实CWT是循环伏安弱信号识别的有力工具，对于理解弱响应体系电化学机理具有重要作用。     

Enhanced cyclability of sulfur cathodes in lithium-sulfur batteries with Na-alginate as a binder

Na-alginate as a binder in an aqueous solvent has been applied in the preparation of sulfur cathodes for lithium-sulfur batteries.Their electrochemical performances have been investigated by a charge-discharge cycle test and electrochemical impedance spectroscopy (EIS).The EIS tests indicated that the alginate sulfur cathode had lower resistance and better kinetic characteristics than those of the poly (vinylidene fluoride) (PVDF) sulfur cathode using PVDF as a binder in a N-methy-2-pyrrolidone (NMP) solvent.The charge-discharge tests showed that the discharge capacity and the capacity retention rate of Na-alginate sulfur cathode were 508 mAh·g-1and 65.4% at the 50th cycle with a current density of 335 mA·g-1.Compared with PVDF sulfur cathode,the alginate sulfur cathode showed a remarkably better cycle performance.These results show that the alginate binder has promising potential for lithium-sulfur battery applications.     

High‐Level Incorporation of Silver in Gold Nanoclusters: Fluorescence Redshift upon Interaction with Hydrogen Peroxide and Fluorescence Enhancement with Herbicide

High‐level incorporation of Ag in Au nanoclusters (NCs) is conveniently achieved by controlling the concentration of Ag⁺ in the synthesis of bovine serum albumin (BSA)‐protected Au NCs, and the resulting structure is determined to be bimetallic Ag₂₈Au₁₀‐BSA NCs through a series of characterizations including energy‐dispersive X‐ray spectroscopy, mass spectroscopy, and X‐ray photoelectron spectroscopy, together with density functional theory simulations. Interestingly, the Ag₂₈Au₁₀ NCs exhibit a significant fluorescence redshift rather than quenching upon interaction with hydrogen peroxide, providing a new approach to the detection of hydrogen peroxide through direct comparison of their fluorescence peaks. Furthermore, the Ag₂₈Au₁₀ NCs are also used for the sensitive and selective detection of herbicide through fluorescence enhancement. The detection limit for herbicide (0.1 nm ) is far below the health value established by the U.S. Environmental Protection Agency; such sensitive detection was not achieved by using AuAg NCs with low‐level incorporation of Ag or by using the individual metal NCs.     

Improving nonlinearity tolerance of 112-Gb/s PDM OFDM systems with coherent detection using BLAST algorithm

A novel long wavelength photodetector with dual-wavelength spectral response is designed and fabricated using a step-shaped Fabry-Prot (F-P) filter structure.The step-shaped GaAs/AlGaAs distributed Bragg reflectors and the InP PIN photodetector are grown on a GaAs substrate using low pressure metal organic chemical vapor deposition.High quality GaAs/InP heteroepitaxy is realized by employing a thin low temperature buffer layer.The photodetector structure is optimized by theoretical simulation.This device has a dual-peak distance of 19 nm (1 558 and 1 577 nm).The 3-dB bandwidth of 16 GHz is simultaneously obtained with peak quantum efficiencies of 8.5% and 8.6% around 1 558 and 1 577 nm,respectively.     

High-reflectivity non-periodic sub-wavelength gratings with small-angle beam-steering ability and its application in Fabry–Perot cavity

We report a high-reflectivity non-periodic sub-wavelength gratings (SWGs) mirror with small-angle beam-steering ability for reflect light. It presents a distinctive characteristic of flexibly controlling the width of oscillation optical field for the improved Fabry–Perot (F–P) cavity. We propose a detailed principle analysis of the improved cavity. By finding out a set of SWGs with the designed structural parameters, both high reflectivity (>?93%) and beam steering (1°) can be implemented. By setting beam-steering angle and cavity length, we can control the width of oscillation optical field in the improved cavity. Beam steering ability and property of controlling the oscillation width are numerically investigated by finite element method. Simulation results prove that cavity length and steering angle can effectively control the main width of oscillation optical field, and the width is linearly associated with the cavity length.     

Accurate double many‐body expansion potential energy surface by extrapolation to the complete basis set limit and dynamics calculations for ground state of NH2

An accurate single‐sheeted double many‐body expansion potential energy surface is reported for the title system. A switching function formalism has been used to warrant the correct behavior at the and dissociation channels involving nitrogen in the ground and first excited states. The topographical features of the novel global potential energy surface are examined in detail, and found to be in good agreement with those calculated directly from the raw ab initio energies, as well as previous calculations available in the literature. The novel surface can be using to treat well the Renner–Teller degeneracy of the and states of . Such a work can both be recommended for dynamics studies of the reaction and as building blocks for constructing the double many‐body expansion potential energy surface of larger nitrogen/hydrogen‐containing systems. In turn, a test theoretical study of the reaction has been carried out with the method of quantum wave packet on the new potential energy surface. Reaction probabilities, integral cross sections, and differential cross sections have been calculated. Threshold exists because of the energy barrier (68.5 meV) along the minimum energy path. On the curve of reaction probability for total angular momentum J = 0, there are two sharp peaks just above threshold. The value of integral cross section increases quickly from zero to maximum with the increase of collision energy, and then stays stable with small oscillations. The differential cross section result shows that the reaction is a typical forward and backward scatter in agreement with experimental measurement result. © 2013 Wiley Periodicals, Inc.