High-resolution single-stranded DNA analysis on 4.5 cm plastic electrophoretic microchannels

Plastic microchannels (4.5 cm long) fabricated from an etched glass master were tested for high-resolution single-stranded DNA analysis. Using replaceable denaturing linear polyacrylamide as sieving matrix, one-color separation of a fragment sizing standard with single-base resolution (R > 0.5) was achieved up to 275 bases. Two-color sizing analysis of four loci short tandem repeat (STR) allelic ladder (CSF1PO, TPOX, TH01, vWA) with single-base resolution (R = 0.62) on TH01 alleles 9.3 (198 bp) and 10 (199 bp) was demonstrated. An average standard deviation of +/- 0.06 bp and +/-0.11 bp in sizing 32 alleles of the CTTv ladder was attained between runs and between channels, respectively. Four-color sequencing separation of a terminator sequencing standard showed a base-calling accuracy of 99.1% out to 320 bases in 13 min.     

Dispersion state and catalytic properties of vanadia species on the surface of V_2O_5/TiO_2 catalysts

The dispersion state and catalytic properties of anatase-supported vanadia species are studied by means of X-ray diffraction (XRD), laser Raman spectroscopy (LRS), H2 temperature-programmed reduction (TPR) and the selective oxidation of o-xylene to phthalic anhydride. The almost identical values of the experimental dispersion capacity of V2O5 on anatase and the surface vacant sites available on the preferentially exposed (001) plane of anatase suggest that the highly dispersed vanadium cations are bonded to the vacant sites on the surface of anatase as derived by the incorporation model. When the loading amount of V2O5 is far below its dispersion capacity, the dispersed vanadia species might mainly consist of isolated VOx species bridging to the surface through V-O-Ti bonds. With the increase of V2O5 loading the isolated vanadia species interact with their nearest neighbors (either isolated or polymerized vanadia) through bridging V-O-V at the expenses of V-O-Ti bonds, resulting in the increase of the ra     

Stereoselective titanium-mediated aldol reactions of (S)-2-tert-butyldimethylsilyloxy-3-pentanone

Titanium-mediated aldol reactions based on (S)-2-tert-butyldimethylsilyloxy-3-pentanone, a lactate-derived chiral ketone, provide the corresponding 2,4-syn-4,5-syn adducts in high yields and diastereomeric ratios with a wide array of achiral and chiral aldehydes. Furthermore, spectroscopic studies of intermediates involved in the process have permitted to propose a mechanism that accounts for the experimental results.     

A novel route to nanosized molybdenum boride and carbide and/or metallic molybdenum by thermo-synthesis method from MoO3, KBH4, and CCl4

Nanosized molybdenum boride and carbide were synthesized from MoO₃, KBH₄, and CCl₄ by thermo-synthesis method at lower temperature. The relative content of Mo, Mo₂C, and molybdenum boride in the product was decided by the molar ratio between MoO₃, KBH₄, and CCl₄. Increasing the molar ratio of CCl₄ to MoO₃ was favorable to the production of Mo₂C. Increasing the molar ratio of KBH₄ to MoO₃ was favorable to the production of molybdenum boride. By carefully adjusting the reaction conditions and annealing in Ar at 900°C, a single phase of MoB could be obtained.     

Preparation, characterization, and condensation of copper tellurolate clusters in the pores of periodic mesoporous silica MCM-41

The copper-tellurolate cluster [(Cu(6)(TePh)(6)(PPh(2)Et)(5)] has been loaded into the pores of MCM-41 by solid-state impregnation techniques. It was found that the best loading conditions are 110 degrees C and 10(-)(3) Torr static vacuum. The resulting material was analyzed by powder X-ray diffraction (PXRD), nitrogen adsorption isotherms, thermogravimetric analysis (TGA), (31)P CP MAS NMR spectroscopy, and TEM. It was observed that loading is accompanied by loss of the phosphine shell, with retention of the copper-tellurium core. Condensation of the impregnated material may proceed thermally or photochemically. Thermal condensation results in the formation of Cu(2)Te nanoparticles as demonstrated by PXRD, and TEM data suggests that the process has taken place inside the pores of MCM-41. Photochemical condensation yields larger metal-chalcogen clusters in the pores as suggested by the result of UV-vis diffuse reflectance spectroscopy and TEM measurements.     

298.1 K时脂肪酸钠盐对定组成水溶液中非水组分活度系数的影响

本文报告了298.1 K下甲酸钠(C_1), 乙酸钠(C_2)、丙酸钠(C_3)、丁酸钠(C_4)、戊酸钠(C_5)、已酸钠(C_6)和庚酸钠(C_7)七个盐对水溶液中乙醇、丙酮和乙腈三个溶质的活度系数的影响。实验方法是, 固定水溶液中乙醇、丙酮和乙腈的浓度(摩尔分数约为0.05), 用气相色谱法检测不同盐浓度下平衡气相中溶质分压的变化, 从而得出溶质的盐效应活度系数γ。本文给出了一个可以连续取样的气液平衡装置的设计。由实验结果可见, 不同碳链大小的脂肪酸根离子的盐效应作用差别很大。C_1、C_2的盐效应主要由于静电作用; 对C_3、C_4盐, 除静电作用外,它们的疏水基与溶质疏水基的相互作用对盐效应有显著影响; C_5、C_6和C_7的盐效应则反映了疏水离子的特色, 疏水水化、疏水相互作用、疏水离子形成的聚集体与不同官能团的特定相互作用等几项因素, 导致儿个溶质盐效应的差异。     

Adsorption of a polymeric siloxane surfactant on carbon black particles dispersed in mixtures of water with polar organic solvents

The adsorption of a rake-type polymeric siloxane surfactant (polydimethylsiloxane-graft-polyether copolymer) on carbon black (CB) particles dispersed in mixtures of water with polar organic solvents (ethanol, formamide, or glycerol) has been investigated. The adsorption obeys the Langmuir isotherm at low surfactant concentrations (below the critical micelle concentration, CMC). At these conditions, the average surface area occupied by one siloxane surfactant follows the sequence water+glycerol mixture >plain water >water+ethanol mixture. At higher surfactant concentrations in the solution in contact with the particles, a sharp increase in the adsorbed amount is observed. The adsorbed layer thickness has been determined by dynamic light scattering. Below the CMC the adsorbed layer thickness is less than 10 nm. Above the CMC, the adsorbed layer thickness increases to 20-30 nm, a length scale comparable to the diameter of the siloxane surfactant micelles in aqueous solution. This fact, together with SANS data that we have obtained in the absence of added polar organic solvent, indicates that the structure of the adsorbed layer is similar to that of micelles. The findings presented here are relevant to waterborne coatings and ink formulations, where polymeric surfactants are used in conjunction with polar organic solvents.     

Preparation and Characterization of Ultrafine Rare Earth Molybdenum Complex Oxide Particles

Ultrafine rare earth molybdenum (La–Mo and Ce–Mo) complex oxide particles have been synthesized by the sol–gel process using citric acid as complexing agent. The influence of preparation conditions such as thermal treatment temperature (T), molar ratio of citric acid to metallic ions (L/M), and pH value of the starting solution on the oxide particle size has been studied. The formation of La₂Mo₂O₉and Ce₂Mo₃O₁₂has been investigated using XRD, DTA–TG, FT-IR, TEM, and BET surface area measurements. It is shown that the morphology and structure of the oxide particles are significantly dependent on the preparation conditions. The influence of different preparation methods on the particle size of La–Mo and Ce–Mo oxides is also discussed.     

Characterization of the chemical constituents in Hongjingtian injection by liquid chromatography quadrupole time‐of‐flight mass spectrometry

Hongjingtian injection is made from Rhodiola wallichiana and used in the treatment of stable angina pectoris associated with coronary heart disease. In this study, the chemical constituents in Hongjingtian injection were comprehensively studied using liquid chromatography quadrupole time‐of‐flight mass spectrometry. A total of 49 compounds were identified or assumed, including 10 organic acids, nine phenylethanoids, 10 phenylpropanoids, two flavonoid glycosides, seven monoterpene glycosides, seven octylglycosides and four other types of compounds. The structures of seven compounds were confirmed by comparing their retention times, MS and UV spectra with the corresponding authentic standards. Amongst the 49 compounds, 35 were firstly found in R. wallichiana, while they have been reported in other species of the genus Rhodiola, including Rhodiola crenulata, Rhodiola sacra, Rhodiola rosea and Rhodiola kirilowii. The possible fragmentation pathways in the mass spectrometry of the major types of compounds are proposed and summarized. Our study demonstrates a rapid method for characterizing the chemical constituents present in the Hongjingtian injection, which could also be applied to the identification of chemical constituents in other TCM formulae containing R. wallichiana.     

Simultaneous quantitation of 23 bioactive compounds in Tanreqing capsule by high‐performance liquid chromatography electrospray ionization tandem mass spectrometry

Tanreqing capsule (TRQC) is a formulation frequently used in traditional Chinese medicine to treat pyrexia, cough, expectoration and pharyngalgia. Since the pharmacological action of traditional Chinese medicines is closely related to their complex and diverse constituents, understanding the exact composition of TRQC is important to elucidate its clinical effectiveness and mechanism of action as well as to establish quality control methods and resolve safety issues. Herein, we employed high‐performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry for the simultaneous quantitation of 23 bioactive compounds in five batches of TRQC; the analytes could be categorized into five types: organic acids (seven compounds), flavonoids (10 compounds), iridoids (two compounds), phenylethanoid glycosides (two compounds) and bile acids (two compounds). The calibration curves for all analytes showed good linearity (r > 0.9953), and the inter‐ and intra‐day precisions did not exceed 4.94 and 4.97%, respectively. The recoveries varied from 90.47% to 109.80%; the corresponding relative standard deviations (RSDs) did not exceed 4.94%; and the repeatability (RSD < 4.72%) and stability (RSD < 4.88%) were also within acceptable limits. Thus, this study can be viewed as a fundamental reference for setting comprehensive TRQC quality standards.