Altered protein synthesis in rat kidney cells exposed to semiconductor materials

It is thought that the extensive industrial use of arsenic, gallium and indium, which have applications as the materials for III–V semiconductors, will increase human exposure to these compounds in the near future. We have undertaken the development of new biological indicators for assessing exposure to these elements. Element-specific alterations in protein synthesis patterns were expected to occur following exposure to arsenic compounds. We examined alterations in protein synthesis in primary cultures of rat kidney proximal tubule epithelial cells by sodium arsenite, gallium chloride and indium chloride, utilizing two-dimensional gel electrophoresis. After incubation with the chemicals for 20 h, newly synthesized proteins were labeled with [³⁵S]methionine. A protein with a molecular weight (M_r) of 30 000 was markedly induced on exposure to 10 μM arsenite or 300 μM gallium chloride, and synthesis of proteins with M_r values of 85 000, 71 000, 65 000, 51 000, 38 000 and 28 000 were also increased by exposure to arsenite and gallium chloride. No significant changes were observed upon exposure to indium. Some of these increased proteins could be heat-shock proteins.     

Photopolymerization of cyclohexene oxide by use of o-nitrobenzyl triphenylsilyl ether/aluminum compound catalyst. Dependence of catalyst activity on the structure of the silyl ether

o-Nitrobenzyl triphenylsilyl ehther/aluminum compound has been previously shown by the authors to act as catalyst in the photopolymerization of epoxides. The dependence of the structure of the silyl ether on the catalyst activity was examined. There were two steps in the photopolymerization. The first step (“Step 1”) is photodecomposition of the silyl ether to silanol. The second step (“Step 2”) is the initiation of polymerization by silanol and the aluminum compound. The introduction of an electron withdrawing group, Cl, CF₃, on the benzene ring bonded to Si made the quantum yield of Step 1 low, however, the rate of Step 2 was increased. The low quantum yield of Step 1 was explained in terms of the rate of electron transfer that is controlled by the relative electron density between the CH₂ and NO₂ in the o-nitrobenzyl group. The acceleration of Step 2 was explained in terms of an increase in silanol acidity that was promoted by the introduction of an electron withdrawing group. The overall rate of the photopolymerizatiol depends to a greater degree on the rate of Step 2 than on that of Step 1.     

7,10,14-Tri-t-butyl-3-amino-1,8-bisdehydro[14]annulene

Tri-t-butylcarboxybisdehydro[14]annulene was converted by the Curtius reaction into unstable aminoannulene, which could be characterized as N-acetyl derivative. The pK_a-value of the aminoannulene reflects aromatic nature of the annulene nucleus.     

A racemization test in peptide synthesis using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM)

Racemization of the C-terminal amino acid (Ala) has been studied in various solvents during coupling between 4-methoxybenzyloxycarbonyl (Z(OMe))-Gly-L-Ala-OH and phenylalanine benzyl ester (H-Phe-OBzl) with 4-(4,6-dimethoxy-1,3,5-thiazin-2-yl)-4-methylmorpholinium chloride (DMT-MM). The reaction occurred without substantial racemization in AcOEt, tetrahydrofuran (THF), N,N-dimethylformamide (DMF), CH3CN, and 2-PrOH, while a slight racemization was observed in dimethyl sulfoxide (DMSO), EtOH, and MeOH. The extent of racemization may correlate with the polarity of the solvents.     

Two-frequency two-photon ionization of nascent PO(X2II) from the collision-free IR photolysis of dimethyl methylphosphonate

We report the detection of nascent PO produced via the collision-free IR photolysis of dimethyl methylphosphonate. Absorption throughout the B²Σ⁺ ← X²Π system is followed by excitation using 266 nm radiation, which results in PO⁺ + e. Spectral features due to spin-orbit excitation appear extremely “cold” relative to vibrations and rotations.     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

Mononuclear oxovanadium complexes of tris(2-pyridylmethyl)amine

Mononuclear oxovanadium(IV) and dioxovanadium(V) complexes of tris(2-pyridylmethyl)amine (tpa) have been prepared for the first time. Crystal structure determinations of three oxovanadium(IV) complexes, [VO(SO4)(tpa)], [VOCl(tpa)]PF6, or [VOBr(tpa)]PF6, and a dioxovanadium(v) complex [V(O)2(tpa)]PF6 disclosed that the tertiary nitrogen of the tpa ligand always occupies the trans-to-oxo site. The structures of an oxo-peroxo complex [VO(O2)(tpa)]Cl that was prepared previously and of a mu-oxo vanadium(III) complex [{VCl(tpa)}2(mu-O)](PF6)2 have also been determined. The tertiary nitrogen is located at a trans site to the peroxo and chloride ligands, respectively. The total sums of the four V-N bond lengths from the tpa ligand are remarkably similar among the six complexes, indicating that the vanadium oxidation states become less influential in tpa bonding due primarily to the coordination of electron-donating oxo ligand(s). Absorption spectra of [VOCl(tpa)]+ in acetonitrile showed a significant change upon addition of p-toluenesulfonic acid and HClO4, but not on addition of benzoic acid. Protonation at the oxo ligand by the former two acids is suggested. Cyclic voltammetric studies in acetonitrile verified the proton-coupled redox behavior of the V(III)/V(IV) process involving the oxo ligand for the first time. From the dependence of the added p-toluenesulfonic acid to the CV, redox potentials for the following species have been estimated: [V(IV)OCl(tpa)]+/[V(III)OCl(tpa)](E1/2=-1.59 V vs. Fc+/Fc), [V(IV)(OH)Cl(tpa)]2+/[V(III)(OH)Cl(tpa)]+(Epc=-1.34 V), [V(IV)(OH2)Cl(tpa)]3+/[V(III)(OH2)Cl(tpa)]2+(Epa=-0.49 V), and [V(IV)Cl2(tpa)]2+/[V(III)Cl2(tpa)]+(E1/2=-0.89 V). The reduction of [V(V)(O)2(tpa)]+ in 0.05 M [(n-Bu)4N]PF6 acetonitrile showed a major irreversible reduction wave V(V)/(IV) at -1.48 V. The metal reduction potentials of the oxovanadium(IV) and dioxovanadium(V) species are very close, reinforcing the significant influence of the oxo ligand(s).     

Selective Encapsulation and Unusual Stabilization of cis-Isomers by a Spherical Polyaromatic Cavity

To explore new cavity functions, we herein employed cis-trans stereoisomers with a N=N, C=C, or C=N unit as guest indicators for a polyaromatic capsule. Thanks to the rigid, spherical cavity with a diameter of ∼1 nm, azobenzene and stilbene derivatives are quantitatively encapsulated by the capsule with 100 % cis-selectivity in water. The isomerization of the cis-azo compound is suppressed against heat and light in the cavity, due to the confinement effect. Furthermore, C,N-diphenyl imine derivatives are quantitatively encapsulated by the capsule in water and adopt an otherwise unstable cis-form. The polyaromatic cavity suppresses the hydrolysis of the imines in water, even at elevated temperature, due to the shielding effect. Accordingly, the properties of the cis-trans isomers could be largely altered through supramolecular manipulation.