Partial Hydrolysis of Cyanide Coordination Polymers Induced by a Pillar Ligand with Optimized Electrochemical Kinetics for Rechargeable Alkaline Batteries

Coordination polymers are promising cathode materials for rechargeable alkaline batteries. Therefore, the precise modulation of these cathodes by chemical structure and in-depth structure transform study is necessary. Here, two model coordination polymer battery cathodes were designed to demonstrate the dynamic structure–performance relationship. We studied the electrochemical performance of two kinds of nickel-based coordination polymer, comprising a planar 2D cyanide-bridged network and a 3D cyanide-bridged network pillared by pyrazine molecules. The 2D coordination polymer showed serious voltage degradation with poor rate capability, whereas the 3D coordination polymer exhibited stable voltage output coupled with high rate at various current densities. The investigation revealed the underlining relationship of plateau voltage degradation and hydrolysis process of electrodes. It was revealed that the pyrazine pillar molecules in the 3D coordination polymer could suppress the hydrolysis and lead to the in situ formation of partially hydrolyzed structure with excellent electrochemical kinetics; this exhibited obvious smaller peak separation (27 mV compared with 149 mV) and hence an almost twofold increase in capacity retention (31.9 to 50.0 %) and energy density retention (18.2 to 35.9 %) at 10 A g⁻¹.     

Adaptive Laser Aiming Through 2 km Horizontal Atmosphere with Precise-Delayed SPGD Algorithm

Journal of Russian Laser Research - Laser aiming is one of the key technologies of laser atmospheric transmission. The beam actually is affected by atmospheric turbulence and mechanical vibration;...     

热熔灌输法制备三维骨架支撑金属锂复合负极

金属锂因具有极高的理论比容量(3860 mAh/g)和最低的电化学势(相对于标准氢电极为-3.04 V),被认为是下一代高比能锂离子电池的首选负极材料。然而,金属锂负极在电池循环过程中发生的刺状枝晶生长和体积变化等问题严重阻碍了其产业化应用进程。近年来研究表明,通过在金属锂中引入具有三维(3D)结构的宿主骨架,不但能有效抑制锂枝晶的生长,而且可以缓解金属锂负极的体积变化,从而提高金属锂电池的循环性能与安全性。因此,设计3D骨架/金属锂复合负极被认为是一种能有效解决金属锂问题的新兴策略。本文综述了热熔灌输法制备3D骨架/金属锂复合负极的研究进展。首先讨论了当前基于3D骨架的预存金属锂技术,然后着重分析了热熔灌输策略中3D骨架锂润湿性的影响因素,以及不同3D骨架修饰特征和改性方法。最后对3D骨架/金属锂复合负极和热熔灌输策略现存问题进行了总结并提出未来的发展方向。     

Synergistic Dual‐Additive Electrolyte Enables Practical Lithium‐Metal Batteries

A rechargeable Li metal anode coupled with a high‐voltage cathode is a promising approach to high‐energy‐density batteries exceeding 300 Wh kg^?1. Reported here is an advanced dual‐additive electrolyte containing a unique solvation structure and it comprises a tris(pentafluorophenyl)borane additive and LiNO₃ in a carbonate‐based electrolyte. This system generates a robust outer Li₂O solid electrolyte interface and F‐ and B‐containing conformal cathode electrolyte interphase. The resulting stable ion transport kinetics enables excellent cycling of Li/LiNi_0.8Mn_0.1Co_0.1O₂ for 140 cycles with 80 % capacity retention under highly challenging conditions (≈295.1 Wh kg^?1 at cell‐level). The electrolyte also exhibits high cycling stability for a 4.6 V LiCoO₂ (160 cycles with 89.8 % capacity retention) cathode and 4.95 V LiNi_0.5Mn_1.5O₄ cathode.     

近场强度分布对线性相位反演算法复原效果的影响

利用数值仿真的方法详细的分析了近场强度分布对线性相位反演算法复原效果的影响.对近场强度分布分别为倾斜、环形和高斯随机型的情况下的复原结果与光强均匀时的复原结果进行对比,结果表明像倾斜型这种大部分为奇函数的近场强度分布对复原效果的影响比较恶劣;而像环形、随机型这样的偶函数或大部分为偶函数的近场强度分布对复原效果的影响则不...     

Experimental Demonstration of Efficient Coherent Combining of 19 Fiber Lasers By Adaptive Gain Coefficient SPGD Algorithm

Journal of Russian Laser Research - The fiber laser coherent combining system with tiled aperture structure is an effective method to obtain a high-brightness laser. To realize the high-efficiency...     

Comparison of several stochastic parallel optimization algorithms for adaptive optics system without a wavefront sensor

Optimizing the system performance metric directly is an important method for correcting wavefront aberrations in an adaptive optics (AO) system where wavefront sensing methods are unavailable or ineffective. An appropriate “Deformable Mirror” control algorithm is the key to successful wavefront correction. Based on several stochastic parallel optimization control algorithms, an adaptive optics system with a 61-element Deformable Mirror (DM) is simulated. Genetic Algorithm (GA), Stochastic Parallel Gradient Descent (SPGD), Simulated Annealing (SA) and Algorithm Of Pattern Extraction (Alopex) are compared in convergence speed and correction capability. The results show that all these algorithms have the ability to correct for atmospheric turbulence. Compared with least squares fitting, they almost obtain the best correction achievable for the 61-element DM. SA is the fastest and GA is the slowest in these algorithms. The number of perturbation by GA is almost 20 times larger than that of SA, 15 times larger than SPGD and 9 times larger than Alopex.     

基于解耦差分泽尼克待定系数法的二维横向剪切波面重建算法

横向剪切干涉术是一种自参考干涉计量技术,其原理是被检测波前与其自身被剪开的波前之间在重叠范围内相干涉,由干涉图得到两相互剪切波前的波前差,通过波面重建算法得到待测波面.在波面重建算法中,泽尼克待定系数法是其中的一种.分析了横向剪切干涉技术的测量原理;提出了一种新的基于解耦差分泽尼克待定系数法的二维横向剪切波面重建算法....     

哈特曼夏克传感器的泽尼克模式波前复原误差

利用哈特曼－夏克传感器测量圆孔径内波像差时，通常使用泽尼模式复原算法。推导了一般情况下哈特曼－夏克传感器泽尼克模式波前复原误差的计算公式。用哈特曼－夏克传感器测量一个像差板的随机静态像差，通过与ZYGO干涉仪的测量结果比较，得到不同泽尼克模式复原阶数下的波前复原误差的实验结果，并与理论计算结果进行了对比。