Aqueous solution and solid state interactions of lanthanide ions with a methacrylic ester polymer bearing pendant 15‐crown‐5 moieties

The interaction between trivalent lanthanide ions and poly(1,4,7,10,13‐pentaoxacyclopentadecan‐2‐yl‐methyl methacrylate), PCR5, in aqueous solution and in the solid state have been studied. In aqueous solution, evidence of a weak interaction between the lanthanides and PCR5 comes from the small red shift of the Ce(III) emission spectra and the slight broadening of the Gd(III) EPR spectra. From the Tb(III) lifetimes in the presence of H₂O and D₂O the loss of one or two water coordinated molecules is confirmed when Tb(III) is bound to PCR5. An association constant of the order of 200 M^?1 was obtained for a 1:1 (lanthanide:15‐crown‐5) complex from the shift of the polymer NMR signals induced by Tb(III). A similar association constant is obtained from the differences of the molar conductivity of Ce(III) solution at various concentrations in presence and absence of PCR5. When Tb(III) is adsorbed on PCR5 membranes, lifetime experiments in H₂O and D₂O confirm the loss of 5 or 6 water coordinated molecules indicating that in solid state the lanthanide(III)‐PCR5 interaction is stronger than in solution. The adsorption of Ce(III) in PCR5 membranes shows a Langmuir type isotherm, from which an equilibrium constant of 39 M^?1 has been calculated. SEM shows that the membrane morphology is not much affected by lanthanide adsorption. Support for lanthanide ion–crown interactions comes from ab initio calculations on 15‐crown‐5/La(III) complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1788–1799, 2007     

Determination of styrene in olive oil by an automatic purge-and-trap system coupled to gas chromatography-mass spectrometry

Summary A new gas chromatographic method using an automatic purge-and-trap system coupled to a GC with mass selective detection to analyze styrene at the parts-per-trillions (ng kg^–1) level is described. The method shows a good sensitivity and the detection limit is 10 ng kg^–1 with a relative standard deviation (RSD) of 4.7% for 164 ng kg^–1 styrene in olive oil. This analytical method has been successfully applied to the analysis of styrene in extra-virgin olive oil from the European market.     

Synthesis of the insect antifeedant CDE molecular fragment of 12-ketoepoxyazadiradione and related compounds

A diastereoselective synthesis of the model insect antifeedant 29 a CDE molecular fragment of 12-ketoepoxyazadiradione has been achieved in ten steps from indenone 9 in 44% overall yield. Several of the compounds obtained along the synthesis related to model compound 29 show significant antifeedant activity against Spodoptera littoralis and Spodoptera frugiperda.     

Phase transitions in silicon single crystals resulting from directional plastic deformation

The formation of polytypic modifications is observed in dislocation-free silicon single crystals under directional plastic deformation. It is shown that the deformation-stimulated phase appears on the surface of the sample in the form of small grains ranging from several hundred to several thousand angstroms in size. A twin structure in the individual grains is observed. Fiz. Tverd. Tela (St. Petersburg) 40, 746–749 (April 1998)     

The Role of γ -Aminopropyltriethoxysilane (γ -APS) on Thermal Stability of TEOS-PDMS Ormosils

The degradation process of TEOS-PDMS Ormosils containing different amounts of γ -APS has been studied by means of DTA, TG, FTIR and ²⁹Si-NMR measurements. It has been found that the amount of γ -APS improved the thermal properties of Ormosil materials. The increase in γ -APS content causes the increment on the decomposition temperatures and activation energies of the studied Ormosils. These results have been attributed to the favourable effect of γ -APS in the copolymerisation reaction between TEOS and PDMS molecules. ²⁹Si-NMR analyses have shown that the incorporation of γ -APS increases the concentration of D(Q) units in the Ormosil structure, i.e., increases the number of TEOS molecules bonded to PDMS ones. Initial decomposition temperature (IDT), temperature of maximum weight loss rate (T_max), integral procedure decomposition temperature (IPDT) and activation energy values (E) were calculated from different equations which described the degradation of these materials. Addition of 10 wt% γ -APS produced an increase of 63^∘C in the IDT and of 115 and 110^∘C, respectively, for T_max and IPDT (up to 478 and 610^∘C) compared to the free γ -APS Ormosil. Activation energy values also rise up to 69.4 kJ⋅ mol⁻¹ by introducing 10 wt% of γ -APS.     

Surface characterization of three marine bacterial strains by Fourier transform IR, X-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry, correlation with adhesion on stainless steel surfaces

Adhesion of bacterial strains on solid substrates is likely related to the properties of the outer shell of the micro-organisms. Aiming at a better understanding and control of the biofilm formation in seawater, the surface chemical composition of three marine bacterial strains was investigated by combining Fourier transform IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary-ion mass spectrometry (ToF-SIMS). The D41 strain surface showed evidence of proteins, as deduced from the NH2 and NCO XPS and ToF-SIMS fingerprints; this strain was found to adhere to stainless steel, glass, or Teflon surfaces in a much higher quantity (2 orders of magnitude) than the two other ones, DA and D01. The latter are either enriched in COOH or sulfates, and this makes them more hydrophilic and less adherent to all substrates. Correlations with physicochemical properties and adhesion seem to demonstrate the role of the external layer composition, in particular the role of proteins more than that of hydrophobicity, on their adhesion abilities.     

Fluorimetric determination of beryllium with pyridoxal-5-phosphate

A simple, rapid and selective method for the determination of beryllium with pyridoxal-5-phosphate has been developed. The system is only fluorescent (lambda(ex) 360, lambda(em) 460 nm) in the presence of a nitrogenous base such as ammonia, ethylenediamine or pyridine, owing to the possible formation of a ternary complex. The calibration graph is linear over the range 8-60 ng ml . The high selectivity of the method permits the determination of beryllium in various types of alloys.     

Identification of the main by-products of the developing agent N-hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine in photographic effluents by liquid chromatography/mass spectrometry

N-Hydroxyethyl-N-ethyl-3-methyl-p-phenylenediamine (CD(4)) is commonly used as a developing agent in color photographic processes. The main by-products formed in developer baths used in the process were separated and identified by liquid chromatography/electron ionization mass spectrometry (LC/EI-MS) and liquid chromatography/atmospheric pressure ionization mass spectrometry (LC/API-MS). A number of side reactions, in addition to the main reactions involved in the developing process, were found to occur. Such side reactions involved in the formation of CD(4) by-products included oxidation, hydroxylation, sulfonation and the formation of coupling products. A reaction pathway for the degradation of CD(4) based on the nature of the by-products identified is proposed and discussed.     

New considerations about the separation and quantification of antimony species by ion chromatography-hydride generation atomic fluorescence spectrometry

A new method for the speciation of inorganic [Sb(III) and Sb(V)] and organic (Me3SbCl2) antimony species by using a polystyrene-divinylbenzene-based anion-exchange HPLC column (Hamilton PRP-X100) coupled to hydride generation atomic fluorescence spectrometry (HG-AFS) is presented. Several mobile phases were tested for the baseline separation of these three antimony species, investigating in detail experimental parameters such as concentration and pH. The best efficiency and resolution was achieved by using a gradient elution between diammonium tartrate 250 mmol l(-1) pH 5.5 (A) and KOH 20 mmol l(-1) pH 12 (B). The gradient programme used was 100% B for 1.5 min, decreasing to 0% B in 0.1 min and maintained the elution with 100% A for 5.5 min. Analysis time was less than 7 min. Equilibration of the column with the complexing mobile phase was found to be critical in order to avoid Sb(III) double peak formation. Dilution in diammonium tartrate medium was necessary in order to avoid Sb(III) oxidation at microg l(-1) concentration level. Detection limits of 0.06 microg l(-1) for Sb(V), 0.09 microg l(-1) for Me3SbCl2 and 0.04 microg l(-1) for Sb(III) as well as repeatability and reproducibility better than 5% R.S.D. (n = 10) and 9% R.S.D. (n = 30) (for 1 and 5 microg l(-1) of Sb(V) and Sb(III) and 5 and 10 microg l(-1) of Me3SbCl2) were obtained. Accuracy and recovery studies were carried out by analysing one river freshwater sample and two water certified reference materials. The proposed methodology can be considered reliable and straightforward for antimony speciation in fresh water samples.     

Monolayers of hydrogen-bonded polymer blends at the air–water interface: poly(vinylacetate)+poly (4-hydroxystyrene)

 The surface pressure (Π) vs surface concentration (Γ_s) curves of the hydrogen-bonded polymer blend poly(vinylacetate)+ poly(4-hydro-xystyrene) (PVAc+P4HS) have been measured at 25 °C onto a water subphase at pH=2.0. While PVAc forms extended monolayers, and the free surface of water is found to be a good solvent for it, P4HS forms compressed monolayers, and the surface is a near Θ-type solvent for it. PVAc and P4HS form miscible non-ideal monolayers until near the collapse pressure through the whole concentration range. The composition dependence of the Π–Γ_s curves is rather complex. Contrary to what might be expected, the addition of PVAc to the blend does not reduce the rigidity of the monolayer until its weight fraction is larger than 0.5. The compressibility data of the P4HS-rich monolayers suggest the existence of a second maximum at high surface coverages, a result already observed in some polysiloxanes. Received: 11 March 1998 Accepted: 7 May 1998