Effects of CRAC Channel on Spatiotemporal Ca2＋ Patterns in T Cells

A reaction-diffusion model is built to investigate the temporal and spatial patterns of cytoplasmic Ca2＋ dynamics under the effects of Ca2＋-release activated Ca2＋ （CRAC） channels in T cells. Simulation results show a strong dependence of the modulation mode of Ca2＋ oscillation and dynamic patterns of Ca2＋ wave on the influx rate through the CRAC channel （ksoc）. When ksoc is small, cytoplasmic Ca2＋ is modulated as a frequency-modulation （FM） signal, whereas it shows an amplitude modulation （AM） mode after ksoc passes through a critical value. The heterogeneity in spatial Ca2＋ distribution is mostly arising from the influx through CRAC channels in both FM and AM modes. During each Ca2＋ spike, a more sustained cytoplasmic Ca2＋ gradient is maintained in the AM mode rather than in the FM mode.     

Nanosecond-time-resolved infrared spectroscopic study of fast relaxation kinetics of protein folding by means of laser-induced temperature-jump

Elucidating the initial kinetics of folding pathways is critical to the understanding of the protein folding mechanism. Transient infrared spectroscopy has proved a powerful tool to probe the folding kinetics. Herein we report the construction of a nanosecond laser-induced temperature-jump （T-jump） technique coupled to a nanosecond timeresolved transient mid-infrared （mid-IR） spectrometer system capable of investigating the protein folding kinetics with a temporal resolution of 50 ns after deconvolution of the instrumental response function. The mid-IR source is a liquid N2 cooled CO laser covering a spectral range of 5.0μm （2000 cm^-1）-6.5μm （1540 cm^-1）. The heating pulse was generated by a high pressure H2 Raman shifter at wavelength of 1.9μm. The maximum temperature-jump could reach as high as 26±1℃. The fast folding/unfolding dynamics of cytochrome C was investigated by the constructed system, providing an example.     

用单分子技术研究抗癌药物顺铂对DNA结构的影响

文章作者用磁镊与原子力显微镜研究了抗癌药物顺铂对单个DNA分子结构的影响.当顺铂浓度较低时,DNA链变得柔软,驻留长度从～52 nm显著缩短到～15 nm;当顺铂浓度较高时,DNA表现出凝聚现象.基于单分子拉伸和原子力显微镜(AFM)成像两方面的实验结果,文章作者提出一个顺铂导致的DNA变软(softening)-成环(looping)-缩短(shortening)-凝聚(condensing)模型(简写为SLSC模型)来解释观察到的DNA凝聚,并认为通过远程交联使DNA形成小环结构是铂类抗癌药物作用的重要特征.     

Self-assembled structures of 1,3:2,4-di(3,4-dimethylbenzylidene) sorbitol in hydrophobic polymer matrices prepared using different heat treatments

Journal of Nanoparticle Research - Ni-doped (CeO2?δ )–YSZ (5 mol% Ni oxide, 10 mol% ceria) mesoarchitectures (MA) with nanocrystalline framework have been...     

Nickel(II) complexes of bidentate N-heterocyclic carbene/phosphine ligands: efficient catalysts for Suzuki coupling of aryl chlorides

Nickel(II) complexes of bidentate N-heterocyclic carbene (NHC)/phosphane ligand L were prepared and structurally characterized. Unlike palladium, which forms [PdCl(2)(L)], the stable nickel product isolated is the ionic [Ni(L)(2)]Cl(2). These Ni(II) complexes are highly robust in air. Among different N-substituents on the ligand framework, the nickel complex of ligand L bearing N-1-naphthylmethyl groups (2 a) is a highly effective catalyst for Suzuki cross-coupling between phenylboronic acid and a range of aryl halides, including unreactive aryl chlorides. The activities of 2 a are largely superior to those of other reported nickel NHC complexes and their palladium counterparts. Unlike the previously reported [NiCl(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane), 2 a can effectively catalyze the cross-coupling reaction without the need for a catalytic amount of PPh(3), and this suggests that the PPh(2) functionality of hybrid NHC ligand L can partially take on the role of free PPh(3). However, for unreactive aryl chlorides at low catalyst loading, the presence of PPh(3) accelerates the reaction.     

Thermally assisted writing for perpendicular MRAM

Spin valves composed of TbCo/CoFe/Cu/CoFe/TbFeCo were fabricated with perpendicular magnetization and GMR ratios of 4.5%. The (TbCo/CoFe) layers and (CoFe/TbFeCo) layers are referred to the free and the pinned layers, respectively. The compositions of two layers were chosen to have a lower Curie temperature (130 °C) but higher coercivity (13.2 kOe) of the free layer at room temperature than those of the pinned layer; therefore, the free layer is quite stable at room temperature but its magnetization can be easily switched at a relatively low temperature. Spin valves were patterned into 100-μm-wide cells and their coercivity was reduced with increasing writing current due to the temperature rise by current-heating. When the current density of the writing current was increased to 2.1×10⁶ A/cm², the required switching field for the free layer was only 10 Oe.     

Direct Observation of Histone-Induced DNA Shortening

We construct a system of magnetic tweezers and apply it to study the interaction between histones and DNA. The condensation of DNA by purified histones at low ionic strengths is directly monitored by recording the length of the DNA as a function of elapsed time. It is found that DNA condensates in a dynamic manner. The binding of hist, ones to DNA is energetically favoured, but the ten,sion applied on DNA tends to unravel the DNA-histone complex, The competition between the two processes determiners the rate of the DNA condensation.     

Preparation of porous biodegradable PLLA with tunable pore size through simple variation of PEG/PLLA-blend crystallization conditions

In this study, porous poly(L-lactic acid) (PLLA) films are prepared via a facile and low-cost approach using poly(ethylene glycol) (PEG) and solution casting. In contrast to most studies, the PEG/PLLA samples are further processed under different crystallization conditions (i.e., different PLLA crystallization temperatures) before PEG removal. As the PEG is extracted via solvent at higher PLLA crystallization temperatures, the resultant PLLA samples have larger pores. Interconnected fibrillar-shaped pores are found in all systems, and the fibrillar-porous structure width is ~150 nm–1.2 μm, as observed via scanning electron microscopy. These pore sizes can be tuned by adjusting the blend composition and crystallization temperature. In addition, PEG/PLLA blends are subjected to hydrolytic degradation analysis according to their crystallization conditions. Higher PLLA crystallization temperature yields higher PLLA crystallinity and larger pores, as well as reduced surface interaction with water. Therefore, the PLLA degradation rate is decreased. The developed PLLA films have potential applications in drug delivery and tissue engineering.     

Optical design and optimization of light emitting diode automotive head light with digital micromirror device light emitting diode

This research proposes a new method for light emitting diode automotive headlight design with digital micromirror device (DMD). The optical design is advanced because of the following features. First, this optical design controls the angle of light pattern without light masking so as to achieve much higher light efficiency compared with traditional optical design for headlight systems. Second, in view of the tendency that the advanced light emitting diode automobile headlight is designed to be a low beam light module and a high beam light still needs an auxiliary lighting system, the optical system designed in this research, mainly adopting DMD module as high/low beam light switch, can switch on and off both the high and low beam lights. Because DMDs function of accepting a bidimensional image, high/low beam light patterns can be determined by DMD. Third, a light pattern will be created and compensated simultaneously by DMD, which might replace mechanical adaptive front-lighting system in the future because DMD takes advantage of fast response and simultaneous compensation. Fourth, a design using a multiple reflection curved mirror is employed in this research to adjust light energy distribution; therefore, the articulation of the light pattern can be enhanced. For this method, experimental results of light efficiency are up to 85%, which is superior to current products in the market.     

应用分子梳技术对DNA与组蛋白相互作用的研究

利用分子梳技术对λ DNA和组蛋白的相互作用进行了研究. 通过这种简单有效的方法，我们将λ DNA分子拉伸到26—28 μm，相当于其原长（约162 μm）的16—17倍. 当组蛋白与DNA结合后，DNA分子发生凝聚现象，复合体的拉伸长度明显变短，其峰值分布在10—14 μm之间. DNA 组蛋白复合体的拉伸长度与组蛋白的浓度、与碱基对和荧光染料的比例有显著的关系. 关键词： 分子梳 组蛋白 DNA 荧光显微