Computational Design of Novel Allosteric Inhibitors for Plasmodium falciparum DegP

The serine protease, DegP exhibits proteolytic and chaperone activities, essential for cellular protein quality control and normal cell development in eukaryotes. The P. falciparum DegP is essential for the parasite survival and required to combat the oscillating thermal stress conditions during the infection, protein quality checks and protein homeostasis in the extra-cytoplasmic compartments, thereby establishing it as a potential target for drug development against malaria. Previous studies have shown that diisopropyl fluorophosphate (DFP) and the peptide SPMFKGV inhibit E. coli DegP protease activity. To identify novel potential inhibitors specific to PfDegP allosteric and the catalytic binding sites, we performed a high throughput in silico screening using Malaria Box, Pathogen Box, Maybridge library, ChEMBL library and the library of FDA approved compounds. The screening helped identify five best binders that showed high affinity to PfDegP allosteric (T0873, T2823, T2801, {"type":"entrez-protein","attrs":{"text":"RJC02337","term_id":"1480409465","term_text":"RJC02337"}}RJC02337, CD00811) and the catalytic binding site (T0078L, T1524, T2328, BTB11534 and 552691). Further, molecular dynamics simulation analysis revealed {"type":"entrez-protein","attrs":{"text":"RJC02337","term_id":"1480409465","term_text":"RJC02337"}}RJC02337, BTB11534 as the best hits forming a stable complex. WaterMap and electrostatic complementarity were used to evaluate the novel bio-isosteric chemotypes of {"type":"entrez-protein","attrs":{"text":"RJC02337","term_id":"1480409465","term_text":"RJC02337"}}RJC02337, that led to the identification of 231 chemotypes that exhibited better binding affinity. Further analysis of the top 5 chemotypes, based on better binding affinity, revealed that the addition of electron donors like nitrogen and sulphur to the side chains of butanoate group are more favoured than the backbone of butanoate group. In a nutshell, the present study helps identify novel, potent and Plasmodium specific inhibitors, using high throughput in silico screening and bio-isosteric replacement, which may be experimentally validated.     

An azo dye for photodynamic therapy that is activated selectively by two-photon excitation

Two-photon photodynamic therapy (TP-PDT) is a promising approach for the treatment of cancer because of its better penetration depth and superior spatial selectivity. Here, we describe an azo group containing cyclized-cyanine derivatives (ACC1 and ACC2) as a two-photon activated, type I based photosensitizer (PS). These small-molecule and heavy atom-free organic dyes showed marked reactive oxygen species (ROS)-generating ability under physiological conditions, as well as fast loading ability into the cells and negligible dark toxicity. Live cell analyses with one- and two-photon microscopy revealed that these dyes showed higher ROS generation ability upon two-photon excitation than upon one-photon excitation via the type I process. The PSs have superior PDT properties compared to conventional Visudyne and 5-ALA under mild conditions. These characteristics allowed for precise PDT at the target region in mimic tumor spheroids, demonstrating that the developed TP PS could be useful in efficient PDT applications and in designing various PSs.

Azo containing dyes as a two-photon selective and type I based photosensitizers (PSs) were developed that exhibit excellent photodynamic therapy properties under mild condition.     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Thermal Studies on Ionic Derivatives of Hafnium(IV) Involving Maltol Ligand

A number of ionic chelate complexes of maltol(A) and hafnium(IV) the type[(η₅−C₅H₅)₂HfL]⁺[MCl3]⁻ (B) [HL=maltol; M=Zn(II), Cd(II), Hg(II), Cu(II)]have been synthesized and characterized by spectral studies (IR, UV, ¹H NMR and ¹³C NMR). The stoichiometry of the complexes has been confirmed by conductance measurements. Thermogravimetric (TG) and differential thermal analytical (DTA) studies have been carried out for these complexes and from TG curves, the order, apparent activation energy and apparent activation entropy of the thermal decomposition reactions have been elucidated .The order in each case has been determined to be one and the degree of spontaneity and lability have been inferred from the apparent activation energy and entropy, respectively. Thermal parameters have been correlated with some structural aspects of the complexes concerned. From differential thermal analysis curves, the heat of reaction has been calculated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal studies of some aryloxides of titanium(IV)

Thermal behaviour of aryloxides of titanium(IV) of composition TiCl_n(OAr)_4?n (wheren=0→3 and OAr=OC₆Bu^t-4, OC₆H₄OMe-4 and OC₆H₂-Bu ₂ ^t -2,6?Me-4) has been studied by DTA and TG analysis. Multiple decomposition steps have been indicated by thermal weight losses which are both exothermic and endothermic as shown by DTA curves. Based upon the total % loss in weight; during entire decomposition titanium dioxide has been found to be the final residue in each case.     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

4-t-Butylphenoxo complexes of oxovanadium(V)

Summary Complexes of composition [VOCl₂(OC₆H₄Bu-t-4)] (1) and [VOCl(OC₆H₄Bu-t-4)₂] (2) have been synthesized by the reaction of VOCl₃ with equimolar and bimolar amounts, respectively, of 4-t-BuC₆H₄OSiMe₃ in CCl₄ and characterized by physio-chemical techniques. The complexes react with -hydroxyaldehydes and ketones such as 2-hydroxybenzaldehyde (salicylaldehyde, salH), and 2-hydroxy-2-phenylacetophenone (benzoin, benzH), 2-hydroxyacetophenone (hapH) and also with the potassium salt of p-chlorobenzohydroxamic acid (KBHACl) in 11 and 12 molar ratios, to yield five- and six-coordinate complexes.     

Influence of preferential solvation on the interpolymer complex formation between methacrylic acid–methacrylamide copolymer and poly(vinyl pyrrolidone)

Interpolymer complex formation has been studied between methacrylic acid–methacrylamide copolymer and poly(vinyl pyrrolidone) in acetone–water mixtures of different compositions. At a specific composition of the solvent (e.g., 70% water + 30% acetone by volume), the intrinsic viscosity of the copolymer and the reduced viscosity of 1:1 interpolymer complex had minimum values. Preferential solvation coefficients (λ/C) have been calculated for the various compositions of the solvent mixtures. An excellent coincidence could be obtained between the maximum (λ/C) and the minimum in the viscosity of the polymer solutions. Interpretations have been sought in terms of conformational change of the copolymer at the specific composition of the solvent mixture.