Preparation, characterization and thermolysis of metal nitrate complexes with 4,4’-bipyridine

Two bis(bipyridine) polymeric metal nitrate complexes with 4,4’-bipyridine of simple formula like [M(bipy)₂](NO₃)2⋅xH₂O (where M=Co, Ni and Cu; x=4, 2 and 0, respectively) have been prepared and characterized. Their thermal decomposition has been undertaken using simultaneous TG-DTG-DTA and DSC in nitrogen atmosphere and non-isothermal TG in air atmosphere. Isothermal TG has been performed at decomposition temperature range of the complexes to evaluate the kinetics of decomposition by applying model-fitting as well as isoconversional method. Possible mechanistic pathways have also been proposed for the thermolysis. Ignition delay measurements have been carried out to investigate the response of these complexes under the condition of rapid heating.     

Separation of Tetracycline Antibiotics by Hydrophilic Interaction Chromatography Using an Amino-Propyl Stationary Phase

In this work the potential of hydrophilic interaction chromatography (HILIC) is explored for the analysis of tetracycline antibiotics. The choice of the polar stationary phase is first discussed and it is demonstrated that aminopropyl stationary phases lead to higher efficiencies and peak symmetry than bare silica ones. The influence of the composition of the mobile phase is studied next : the concentration of the weaker solvent (acetonitrile), the nature and concentration of the more polar solvent (water or methanol), pH, the nature and ionic strength of the buffer. It is shown that high efficiencies are reached only with a citrate buffer that impairs the interactions with the residual silanol groups whatever the mobile phase pH is. We demonstrate that the citrate buffer strongly interacts with the cationic moiety of the aminopropyl stationary phase and thus reduces the accessibility of silanols. The separation of oxytetracycline, tetracycline and chlortetracycline is achieved in a few minutes at pH 3.5 or 5, with no peak tailing as usually observed in reversed phase liquid chromatography with an opposite elution order when compared with reversed phase liquid chromatography.     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin     

Multiresidue method for simultaneous determination of ten quinolone antibacterial residues in multimatrix/multispecies animal tissues by liquid chromatography with fluorescence detection: single laboratory validation study

Quinolone antibacterials are veterinary drugs authorized for use in food animal production. The analysis of residual amounts of drugs in food from animal origin is important for quality control of products for consumers. For this purpose, Maximum Residue Limits (MRLs) have been set up by a European Union Council Regulation on Veterinary Drug Residues (No. 90/2377/EEC and subsequent), and 8 quinolones received MRLs at concentration levels depending on both the matrix and the animal species of interest. A method was developed for screening and confirming 10 quinolone residues (ciprofloxacin, danofloxacin, difloxacin, enrofloxacin, flumequine, marbofloxacin, nalidixic acid, norfloxacin, oxolinic acid, sarafloxacin) in a wide variety of matrixes of different animal species. It involves extraction of the residues from the biological tissues/fluids by acidic aqueous solution, centrifugation and filtration prior to injection on a C18 narrow-bore column, and detection through a 3-step-mode fluorescence detector. The method was validated during a 2-week study for a set of 8 species-matrixes (i.e., bovine raw milk, bovine muscle, porcine muscle, porcine kidney, porcine liver, fish flesh and skin, poultry muscle, whole egg). Residues were quantified down to 15 microg/kg with limits of detection and quantitation ranging from 4 to 11 and 13 to 36 microg/kg, respectively, which are sufficient compared to the wide range of MRLs set for these substances (from 30 microg/kg for danofloxacin in milk to 1900 microg/kg for difloxacin in poultry liver). The limit of performance of the method in terms of CCalpha and CCbeta, the critical concentrations stated in the Decision No. 2002/657/EC and the ISO Standard No. 11843, has been calculated for the authorized (MRL) substances but only estimated in the case of the nonauthorized (non-MRL) substances.     

X-Ray Crystallography and Free Energy Calculations Reveal the Binding Mechanism of A2A Adenosine Receptor Antagonists

We present a robust protocol based on iterations of free energy perturbation (FEP) calculations, chemical synthesis, biophysical mapping and X-ray crystallography to reveal the binding mode of an antagonist series to the A_2A adenosine receptor (AR). Eight A_2AAR binding site mutations from biophysical mapping experiments were initially analyzed with sidechain FEP simulations, performed on alternate binding modes. The results distinctively supported one binding mode, which was subsequently used to design new chromone derivatives. Their affinities for the A_2AAR were experimentally determined and investigated through a cycle of ligand-FEP calculations, validating the binding orientation of the different chemical substituents proposed. Subsequent X-ray crystallography of the A_2AAR with a low and a high affinity chromone derivative confirmed the predicted binding orientation. The new molecules and structures here reported were driven by free energy calculations, and provide new insights on antagonist binding to the A_2AAR, an emerging target in immuno-oncology.     

A priori reduction method for solving the two-dimensional Burgers’ equations

The two-dimensional Burgers’ equations are solved here using the A Priori Reduction method. This method is based on an iterative procedure which consists in building a basis for the solution where at each iteration the basis is improved. The method is called a priori because it does not need any prior knowledge of the solution, which is not the case if the standard Karhunen-Loéve decomposition is used. The accuracy of the APR method is compared with the standard Newton-Raphson scheme and with results from the literature. The APR basis is also compared with the Karhunen-Loéve basis.     

直接键连原子间的NMR偶合常数的自然杂化轨道研究V.~(13)C-~(13)C和~(13)C-~(31)P核自旋偶合常数~1J_(CC)和~1J_(CP)

在前文工作的基础上，结合ＭＮＤＯ／ＥＨＭＯ分子轨道方法和自然杂化轨道方法，具体计算了ＣＣ键和ＣＰ键的核自旋偶合常数．计算结果表明，１ＪＣＣ和１ＪＣＰ主要由成键原子的轨道杂化作用和键极性这两种结构因素所决定．为从简单价键理论角度解释和计算１ＪＣＣ和１ＪＣＰ值提供了简便直观的方法．     

Azide telechelics chain extended by click reaction: Synthesis,characterization, and cross‐linking

Azide telechelics of poly(dimethylsiloxane) (PDMS), polypropylene oxide (PPO), and polyethylene oxide (PEO) were synthesized from the corresponding epoxy telechelics and characterized. These oligomeric azides were chain extended by reaction with bispropargyl ether of bisphenol A (BPEBA) through a copper‐catalyzed azide‐alkyne cycloaddition (CuAAC) reaction. PDMS manifested a faster reaction in contrast to PPO or PEO. The chain‐extended polymers underwent cross‐linking above 170°C through thermal cleavage of residual (terminal) azide groups. This was manifested in their rheograms and was further substantiated by FTIR and NMR spectroscopic analyses. Dynamic mechanical analyses of the cross‐linked polymers exhibited characteristic transitions of hard and soft segments, implying microphase separation in the system. Microscopic evaluation of the thermally cross‐linked sample revealed a porous morphology with microsized to nanosized pores.