The effect of side-chain length of cellulose fatty acid esters on their thermal,barrier and mechanical properties

Currently, long-chain cellulose esters are not produced commercially because of high price, and since their preparation typically requires a large quantity of chemicals. To reduce the chemical consumption, cellulose reactivity needs to be increased without losing its quality. One way to increase the reactivity of cellulose is to decrease its molar mass in a controlled manner. In this study, we have synthesized cellulose esters with different side-chain length (C6–C18) in a homogeneous system using ozone molar mass-controlled cellulose. The target was to keep the degree of substitution as low as possible while still ensuring the suitability of cellulose esters for solvent casting. Thermal, barrier and mechanical properties were studied depending on cellulose fatty acid ester side-chain length. All our molar mass-controlled cellulose esters form optically transparent, flexible and heat-sealable films with good water barrier properties and are processable without the addition of an external plasticizer. Furthermore, the films have mechanical properties comparable to some generally used plastics. These good properties suggest that our molar mass-controlled cellulose esters could be potential candidates for various applications such as films and composites.     

Optimal multiqubit operations for Josephson charge qubits

We introduce a method for finding the required control parameters for a quantum computer that yields the desired quantum algorithm without invoking elementary gates. We concentrate on the Josephson charge-qubit model, but the scenario is readily extended to other physical realizations. Our strategy is to numerically find any desired double- or triple-qubit gate. The motivation is the need to significantly accelerate quantum algorithms in order to fight decoherence.     

Influence of Cyclodextrins on the Kinetics of Oxidation of Amino Acids and BSA by Hydrazyl Radicals

The kinetics of oxidation of amino acids (Arg, His, Lys, Phe, Thr and Tyr), a dipeptide (Gly-His), and BSA (bovine serum albumin) by two persistent water soluble free radicals of the hydrazyl type has been studied.The rate decreases in the order Arg>Lys>Tyr>Thr>HisBSAPheGly-His with bothfree radicals. Addition to the reaction mixture of - and -cyclodextrin decreases the oxidation rate, probably due to amino acidencapsulation in the cyclodextrin cavity. -Cyclodextrin protects more efficiently against oxidation than -cyclodextrin.     

The microscopic investigation of structures of moving flux lines by neutron and muon techniques

We have used a variety of microscopic techniques to reveal the structure and motion of flux line arrangements, when the flux lines in low T _c type II superconductors are caused to move by a transport current. Using small-angle neutron scattering by the flux line lattice (FLL), we are able to demonstrate directly the alignment by motion of the nearest-neighbor FLL direction. This tends to be parallel to the direction of flux line motion, as had been suspected from two-dimensional simulations. We also see the destruction of the ordered FLL by plastic flow and the bending of flux lines. Another technique that our collaboration has employed is the direct measurement of flux line motion, using the ultra-high-resolution spectroscopy of the neutron spin-echo technique to observe the energy change of neutrons diffracted by moving flux lines. The muon spin rotation (μSR) technique gives the distribution of values of magnetic field within the FLL. We have recently succeeded in performing μSR measurements while the FLL is moving. Such measurements give complementary information about the local speed and orientation of the FLL motion. We conclude by discussing the possible application of this technique to thin film superconductors.     

A high performance liquid chromatographic method for the determination of ethylenethiourea in urine and on filters

Urine samples are evaporated and pretreated with silica gel and alumina. Filters undergo ultrasonic treatment in water. Ethylenethiourea (ETU) is then determined by reversed-phase high-performance liquid chromatography with detection at 230 nm. The detection limit for ETU is 0.1 ng per injection and linear response is found for the range 0.3–110 ng; 0.2 μg 1^?1 ETU can be detected in urine. Recoveries from spiked filters (7 μg ETU/filter) varied from 79 to 94%. The methods are sensitive enough for application in occupational hygiene work.     

The determination of traces of fluoroacetic acid by extractive alkylation,pentafluorobenzylation and capillary gas chromatography-mass spectrometry

A method is described for the extraction and determination of nanogram amounts of the highly toxic fluoroacetic acid in plant samples. The acid is extracted by ammonia solution and purified by repeated ether extractions. The fluoroacetate is then transferred to dichloromethane by using tetrahexylammonium as counter-ion, and finally derivatized by pentafluorobenzyl bromide. The determination is completed by capillary gas chromatography and single-ion monitoring mass spectrometry. Small amounts of fluoroacetate were found in many plant samples, including tea. The limit of detection was about 0.005 μg g^?1, the reproducibility about ±9% and the recovery of added fluoroacetate 89 ± 6%.     

Residual lignin inhibits thermal degradation of cellulosic fiber sheets

The market for cellulosic fiber based food packaging applications is growing together with the importance of improving the thermal durability of these fibers. To shed light on this, we investigated the role of residual lignin in pulp on the thermal stability of refined pulp sheets. The unbleached, oxygen delignified, and fully bleached pulp sheets were studied after four separate refining degrees. Comparison by Gurley air resistance, Bendtsen porosity, and the oxygen transmission rate tests showed that lignin containing sheets had better air and oxygen barrier properties than fully bleached sheets. Sheet density and light scattering coefficient measurements further confirmed that the lignin containing pulps underwent more intense fibrillation upon refining that changed the barrier properties of the sheets. Thermal treatments (at 225 °C, 20 and 60 min, in water vapor atmospheres of 1 and 75 v/v %) were applied to determine the thermal durability of the sheets. The results revealed that the residual lignin in pulps improved the thermal stability of the pulp sheets in the hot humid conditions. This effect was systematically studied by tensile strength, brightness, and light absorption coefficient measurements. The intrinsic viscosity results support the findings and suggest that lignin is able to hinder the thermal degradation of pulp polysaccharides. In spite of the fact that lignin is known to enhance the thermal yellowing of paper, no significant discoloration of the pulp sheets containing residual lignin was observed in the hot humid conditions (75 v/v %). Our results support the idea of lignin strengthening the thermal durability of paper.