Comparison of three sequential extraction procedures to describe metal fractionation in anaerobic granular sludges

In the last few decades, several sequential extraction procedures have been developed to quantify the chemical status of metals in the solid phase. In this study, three extraction techniques (modified [A. Tessier, P.G.C. Campbell, M. Bisson, Anal. Chem. 51 (1979) 844]; [R.C. Stover, L.E. Sommers, D.J. Silvera, J. Water Pollut. Con. F. 48 (1976) 2165]; and the Bureau Communautaire de Reference (BCR) [K.F. Mossop, C.M. Davidson, Anal. Chim. Acta 478 (2003) 111]) were applied to study the distribution of trace (Co, Ni, Zn and Cu) and major (Mn and Fe) elements in two different anaerobic granular sludges from full-scale methanogenic wastewater treatment plants. The Stover scheme displayed a higher number of fractions that induces a poor recovery compared to the other schemes. The sequential extraction scheme recommended by BCR and the modified Tessier scheme gave similar trends and are sufficiently repeatable and reproducible for application in fractionation studies. However, the BCR scheme seems to be of limited utilisation to study anaerobic matrixes because the extraction stage for its reducible fraction may release substantial amounts of trace elements bound to the organic/sulfides fraction, and consequently, the recovery of trace elements in the oxide fraction may be overestimated at the expense of the oxidisable fraction. As a final conclusion, the modified Tessier scheme seems to be the most suitable scheme to study the metal partitioning in anaerobic granular sludges.     

Comprehensive bioinformatics study reveals targets and molecular mechanism of hesperetin in overcoming breast cancer chemoresistance

Molecular Diversity - The effectiveness of chemotherapy in breast cancer treatment can be increased using a combinatorial agent. Hesperetin has been reported to increase the sensitivity of...     

Current Status,Distribution, and Future Directions of Natural Products against Colorectal Cancer in Indonesia: A Systematic Review

In 2020, an estimated 19.3 million new cancer cases and nearly 10 million cancer deaths have occurred worldwide, with colorectal cancer ranking as the third most frequently diagnosed (10.0%). Several attempts have been conducted against cancer, including surgery, radiation, monoclonal antibodies, and chemotherapy. Many people choose natural products as alternatives against cancer. These products will not only help in human life preservation but also work as a source of up-to-date information, leading people away from incorrect information. We discuss the current status, distribution, and future implications of protecting populations with natural products as an alternative against colorectal cancer in Indonesia. Thirty-eight studies were included in this review for data extraction. The distribution of natural products in Indonesia that have potential activity against colorectal cancer cells was predominated by terpenoids, followed by phytosterols, phenolics, alkaloids, and polyisoprenoids. The type of cell line utilized in the cytotoxic activity analysis of natural products was the WiDr cell line, followed by HT-29 cells and HCT-116 cells. This review showed that MTT in vitro assay is a general method used to analyze the cytotoxic activity of a natural product against colorectal cancer cells, followed by other in vitro and in vivo methods. The systematic review provided predictions for several secondary metabolites to be utilized as an alternative treatment against colorectal cancer in Indonesia. It also might be a candidate for a future co-chemotherapy agent in safety, quality, and standardization. In addition, computational methods are being developed to predict the drug-likeness of compounds, thus, drug discovery is already on the road towards electronic research and development.     

Catalytic Properties of Caseinolytic Protease Subunit of Plasmodium knowlesi and Its Inhibition by a Member of δ-Lactone,Hyptolide

The caseinolytic protease (Clp) system plays an essential role in the protein homeostasis of the malaria parasite, particularly at the stage of apicoplast development. The inhibition of this protein is known to have a lethal effect on the parasite and is therefore considered an interesting avenue for antimalaria drugs discovery. The catalytic activity of the Clp system is modulated by its proteolytic subunit (ClpP), which belongs to the serine protease family member and is therefore extensively studied for further inhibitors development. Among many inhibitors, the group of β-lactone is known to be a specific inhibitor for ClpP. Nevertheless, other groups of lactones have never been studied. This study aims to characterize the catalytic properties of ClpP of Plasmodium knowlesi (Pk-ClpP) and the inhibition properties of a δ-lactone hyptolide against this protein. Accordingly, a codon-optimized synthetic gene encoding Pk-ClpP was expressed in Escherichia coli BL21(DE3) and purified under a single step of Ni²⁺-affinity chromatography, yielding a 2.20 mg from 1 L culture. Meanwhile, size-exclusion chromatography indicated that Pk-ClpP migrated primarily as homoheptameric with a size of 205 kDa. The specific activity of pure Pk-ClpP was 0.73 U µg⁻¹, with a catalytic efficiency k_cat/K_M of 0.05 µM⁻¹ s⁻¹, with optimum temperature and pH of 50 °C and 7.0–7.5, respectively. Interestingly, hyptolide, a member of δ-lactone, was shown to inhibit Pk-ClpP with an IC₅₀ value of 17.36 ± 1.44 nM. Structural homology modelling, secondary structure prediction, and far-UV CD spectra revealed that helical structures dominate this protein. In addition, the structural homology modeling showed that this protein forms a barrel-shaped homoheptamer. Docking simulation revealed that the inhibition was found to be a competitive inhibition in which hyptolide was able to dock into the catalytic site and block the substrate. The competitiveness of hyptolide is due to the higher binding affinity of this molecule than the substrate.     

A New and Sensitive HPLC-UV Method for Rapid and Simultaneous Quantification of Curcumin and D-Panthenol: Application to In Vitro Release Studies of Wound Dressings

Curcumin (CUR) and D-panthenol (DPA) have been widely investigated for wound-healing treatment. In order to analyse these two compounds from a dosage form, such as polymer-based wound dressings or creams, an analytical method that allows the quantification of both drugs simultaneously should be developed. Here, we report for the first time a validated high-performance liquid chromatographic (HPLC) method coupled with UV detection to quantify CUR and DPA based on the standards set by the International Council on Harmonization (ICH) guidelines. The separation of the analytes was performed using a C₁₈ column that utilised a mobile phase consisting of 0.001% v/v phosphoric acid and methanol using a gradient method with a run time of 15 min. The method is linear for drug concentrations within the range of 0.39–12.5 μg mL⁻¹ (R² = 0.9999) for CUR and 0.39–25 μg mL⁻¹ for DPA (R² = 1). The validated method was found to be precise and accurate. Moreover, the CUR and DPA solution was found to be stable under specific storage conditions. We, therefore, suggest that the HPLC-UV method developed in this study may be very useful in screening formulations for CUR and DPA within a preclinical setting through in vitro release studies.     

Wavelet approach incorporated with optimization for solving stiff systems

Wavelet-based methods open a door for numerical solution of differential equations. Stiff systems, a special type of differential equation systems, have the solutions with the components that exhibit complex dynamic behaviours such as singularities and abrupt transitions, which are hard to be captured by the typical numerical method or incur the computing complexity. This paper proposed to use the Wavelet-Galerkin scheme for solving stiff systems. Daubechies wavelet based connection coefficients, required in the Wavelet-Galerkin scheme, were computed using an algorithm that we recently rectified. The Lagrange multiplier method was incorporated into the wavelet approach in order to optimise the fitting of the initial conditions. Comparative studies were also carried out between the proposed approach and the Haar wavelet approach.     

Solid-Adsorbed Polymer-Electrolyte Interphases for Stabilizing Metal Anodes in Aqueous Zn and Non-Aqueous Li Batteries

Polymers are known to adsorb spontaneously from liquid solutions in contact with high-energy substrates to form configurationally complex, but robust phases that often exhibit higher durability than might be expected from the individual physical bonds formed with the substrate. Rational control of the physical, chemical, and transport properties of such interphases has emerged as a fundamental opportunity for scientific and technological advances in energy storage technology but requires in-depth understanding of the conformation states and electrochemical effect of the adsorbed polymers. Here, we analyze the interfacial adsorption of oligomeric polyethylene glycol (PEG) chains of moderate sizes dissolved in protic and aprotic liquid electrolytes and find that there is an optimum polymer molecular weight of approximately 400 Da at which the highest columbic efficiency is achieved for both Zn and Li deposition. These findings point to a simple, versatile approach for extending the lifetime of batteries.