Electron beam crosslinking of non-lead PVC formulations

PVC samples with lead-free and lead-base stabilizer, containing TMPTMA (trimethylolpropane trimethacrylate) as a crosslinker and DOP (2-ethylhexyl phthalate) as a plasticizer, were electron beam treated at different doses (2–200 kGy) and characterized to evaluate crosslinking and other several properties, as a continuation of our previously reported paper, where these PVC formulations, typical for wire and cable applications, underwent gamma irradiation. The PVC was formulated with two different stabilizing systems: Ca/Zn and dibasic lead phthalate for comparison, to use them as jackets for a 22 wire gage (AWG). Small samples of the jacketed wires were irradiated in an industrial Dynamitron electron accelerator for the corresponding doses, along with two dosimetric systems: radiochromic thin film and alanine pellets dosimeters. The maximum dose applied was decided as the crosslinking increased, until the gel content was stable. The dose of 200 kGy was the condition for the highest crosslinking, so most of the wire was irradiated at such dose. Chemical and mechanical evaluations were carried out to the irradiated wire. The results show that 200 kGy was too high dose for the materials, since an important degradation is observed for the Ca/Zn systems. Unfortunately, such dose affects basically to CaZn formulations, which showed much poorer performance than classical lead-containing compositions. The results also indicate that gel content is not the best way of deciding the optimum condition for irradiation.     

Use of ETAAS,FAAS and ICP-OES for production and post-certification monitoring of a multielemental certified reference material according to national regulation limits for elements in drinking water

Accreditation and Quality Assurance - This paper describes the development of a certified reference material (CRM), produced in the National Institute of Quality from Peru (INACAL) in order to...     

SALS,WAXS and mechanical properties of heat‐treated thermotropic polymers

The influence of heat treatment on the texture, microstructure and tensile mechanical properties of extruded thin films of a series of high‐performance thermotropic liquid crystal polymers (LCPs) was investigated. LCPs based on random units of hydroxybenzoic acid (B), hydroxynaphthoic acid (N), terephthalic acid (TA) and biphenol (BP) were kindly supplied by the former Hoechst Celanese Corp as 50 µm thick extruded tapes. The LCPs, denoted B‐N, COTBP and RD1000, have B and N as common comonomers and vary the other comonomers. Thus, this study also enables the investigation of the influence of monomer composition on microstructure and mechanical properties. Heat treatments were carried out at temperatures close to the solid‐to‐nematic transition (T_s→n) for periods up to 5 h, under dry air conditions. The thermal treatment produced either two endotherms or a small increase of T_s→n (B‐N and RD1000), or increased significantly T_s→n (COTBP). Moreover, when heat treatment was carried out approximately 40°C below the respective T_s→n, the mechanical Young's modulus, E, along the extrusion axis, increased for all LCPs. Strikingly, for COTBP, E increased over 100% relative to the as‐extruded film. The results also showed that the optimum treatment time for improving the Young modulus, under dry air atmosphere, was between 3 and 4 h. Wide‐angle X‐ray scattering showed a significant sharpening of crystalline reflections and concentration of the 002 meridional reflection as a result of thermal treatment, suggesting the elimination of defects and a better alignment of the molecular chains along the extrusion axis. This would explain the increase in tensile modulus. Copyright © 2013 John Wiley & Sons, Ltd.     

A high statistics measurement of the Lambda(+)(c) lifetime

A high statistics measurement of the Lambda(+)(c) lifetime from the Fermilab fixed-target FOCUS photoproduction experiment is presented. We describe the analysis technique with particular attention to the determination of the systematic uncertainty. The measured value of 204.6 +/- 3.4 (stat) +/- 2.5 (syst) fs from 8034 +/- 122 Lambda(+)(c)-->pK(-)pi(+) decays represents a significant improvement over the present world average.     

Relaxed loading conditions for higher order homogenisation approaches

The present paper deals with the formulation of minimal loading conditions for the application of numerical homogenisation techniques, namely the FE² methodology. Based on the set of volume averaging rules connecting the heterogeneous micro and the homogeneous macro scale, the minimal constraints on the deformation of a micro volume are derived for a classical Cauchy continuum as well as for a micromorphic continuum theory. For both cases, numerical studies are included highlighting the main aspects of the proposed procedure within the context of small deformations. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Spectral Density Function for the Laplacian on High Tensor Powers of a Line Bundle

For a symplectic manifold with quantizing line bundle, a choice of almost complex structure determines a Laplacian acting on tensor powers of the bundle. For high tensor powers Guillemin–Uribe showed that there is a well-defined cluster of low-lying eigenvalues, whose distribution is described by a spectral density function. We give an explicit computation of the spectral density function, by constructing certain quasimodes on the associated principle bundle.     

Concept and synthetic approach for a kilogram scale synthesis of octa-d-arginine amide nonahydrochloride salt

Oligomers of arginine, such as octa-d-arginine amide, are excellent transporters for active drugs through cell membranes and tissue. The synthesis of octa-d-arginine amide, as the nonahydrochloride salt, was approached via a solution phase synthetic route involving the preparation of an octa-d-ornithine intermediate, which was then converted into the desired octa-d-arginine compound through a guanidinylation step. The multi-step synthesis was carried out at pilot scale, resulting in the preparation of 700 g of the target molecule. No chromatographic purification was needed at any step of the process.