Treatment of zinc-contaminated water using a multistage ferrihydrite sorption system

Previous studies demonstrated the environmental and economic benefits of treating lead(II)-contaminated water streams with ferrihydrite in multiple equilibrium sorption stages. In this work, multistage ferrihydrite sorption systems were evaluated for their effectiveness in reducing single-solute zinc(II) (Zn(II)) concentrations in contaminated water streams to very low levels. As for lead(II) (Pb(II)), experimental data and modeling results indicate that a multistage sorption system can significantly reduce Zn(II) effluent concentrations for the same total amount of sorbent or, alternatively, dramatically lower total sorbent consumption for the same effluent Zn(II) concentration. Compared to Pb(II), however, Zn(II) removal requires on the order of 10 times more sorbent to achieve the same target effluent concentration for the same pH and number of stages. Model predictions were made using a steady-state, multistage, equilibrium adsorber model that was previously developed for and integrated into OLI Systems' Environmental Simulation Program (ESP). The modified triple-layer model was used to simulate Zn(II) surface-liquid equilibria within the adsorber model. Engineering screening evaluations again indicate that a 2- to 3-stage sorption process can provide significant economic savings when compared to a 1-stage process operating with the same target effluent Zn(II) concentration. Additional equilibrium stages beyond 2 or 3 provide diminishing economic returns. The major economic driver for multiple contacting stages is reduced capital investment and operating costs for sludge handling, dewatering, and disposal.     

A low-cost lead-acid battery with high specific-energy

Lightweight grids for lead-acid battery grids have been prepared from acrylonitrile butadiene styrene (ABS) copolymer followed by coating with lead. Subsequently, the grids have been electrochemically coated with a conductive and corrosion-resistant layer of polyaniline. These grids are about 75% lighter than those employed in conventional lead-acid batteries. Commercial-grade 6V/3.5Ah (C₂₀-rate) lead-acid batteries have been assembled and characterized employing positive and negative plates constituting these grids. The specific energy of such a lead-acid battery is about 50 Wh/kg. The batteries can withstand fast charge-discharge duty cycles. Dedicated to Prof J Gopalakrishnan on his 62nd birthday.     

A mixed-integer goal programming model for nursing service budgeting

This paper presents a mixed-integer goal programming model for expense budgeting in a hospital nursing department. The model incorporates several different objectives based upon such considerations as cost containment and providing appropriate nursing hours for delivering quality nursing care. Also considered are possible trade-offs among full-time, part-time and overtime nurses on weekdays as well as weekends. The budget includes vacation, sick leave, holiday, and seniority policies of a hospital and various constraints on a hospital nursing service imposed by nursing unions. The results are based upon data from a study hospital and indicate that the model is practical for budgeting in a hospital nursing department.     

A Convenient Synthesis of Naturally Occuring Xanthones

Six naturally occuring xanthones are synthesized by the thermal condensation of methyl 2,6-dihydroxybenzoate, methyl 2,4-dihydroxybenzoate and methyl 2,4,6-trihydroxybenzoate with hydroquinone, catechol and pyrogallol.     

Synthesis of 2, 2-Dimethyl-2H-chromenes via a Palladium (II) Catalysed Reaction

The antijuvenile hormones Precocene-I, Precocene-II and other bioactive 2, 2-dimethyl-2H-chromenes have been synthesised by intramolecular oxidative cyclisation of 2-isoprenyl phenols catalysed by a palla-dium(II) salt.     

Development of Polar Organic Mode Chromatographic Method by Polysaccharide-Based Immobilized Chiral Selector and Validation for the Determination of the Enantiopurity of Novel Mineralocorticoid Receptor Antagonist Atropisomer–Esaxerenone

Esaxerenone is a new nonsteroidal mineralocorticoid receptor antagonist utilized to treat high blood pressure. Chemically, esaxerenone is a pyrrole derivative consisting of hindered rotation, which results in stereoisomers named atropisomers. Currently, no methods exist for the separation and quantification of these atropisomers. A new and accurate chiral liquid chromatographic technique was developed and validated to estimate the enantiomeric purity of esaxerenone. Polar organic chiral separation was carried out on an immobilized amylose-based chiral stationary phase (Chiralpak IG) with methanol:acetonitrile:diethylamine (9:1:0.1, v/v/v) mixture as a mobile phase. The total runtime was 15 min, and the resolution (R_s) between the atropisomers was more than 3.0. The detection and quantification thresholds for the R-atropisomer were found to be 0.03 and 0.1 µg mL^?1, respectively, for a test concentration of esaxerenone (1000 µg mL^?1). Over the range from the limit of quantification to 0.3 percent, the method's linearity for the R-atropisomer was excellent (R²?>?0.999). The R-atropisomer recovery varied from 95 to 102%, confirming the method’s good accuracy. For a 48-h research period, the chemical was shown to be stable.

     

Sodiation Of Hard Carbon: How Separating Enthalpy And Entropy Contributions Can Find Transitions Hidden In The Voltage Profile

Sodium-ion batteries (NIBs) utilize cheaper materials than lithium-ion batteries (LIBs) and can thus be used in larger scale applications. The preferred anode material is hard carbon, because sodium cannot be inserted into graphite. We apply experimental entropy profiling (EP), where the cell temperature is changed under open circuit conditions. EP has been used to characterize LIBs; here, we demonstrate the first application of EP to any NIB material. The voltage versus sodiation fraction curves (voltage profiles) of hard carbon lack clear features, consisting only of a slope and a plateau, making it difficult to clarify the structural features of hard carbon that could optimize cell performance. We find additional features through EP that are masked in the voltage profiles. We fit lattice gas models of hard carbon sodiation to experimental EP and system enthalpy, obtaining: 1. a theoretical maximum capacity, 2. interlayer versus pore filled sodium with state of charge.     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

Growth of hollow Se–Te whisker crystals

On the basis of micro- and macro-morphological studies the mechanism responsible for the growth of Se–Te whiskers has been suggested. It has been shown that Sc–Te whiskers grow by layer growth mechanism in which screw dislocation is not the source of step but the growth proceeds by two-dimensional nucleation. This has been supported by the supersaturation data. The plausible mechanism for the growth of hollow whiskers has also been suggested.