Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

A study of novel heat-resistant polymers: Preparation of photosensitive fluorinated polybenzoxazole precursors and physical properties of polybenzoxazoles derived from the precursors

A series of novel photosensitive polybenzoxazole precursors were prepared from polycondensation of 2,2-bis(3,3′-amino-4,4′-hydroxyphenyl)hexafluoropropane with photosensitive dicarboxylic acid chlorides such as p-phenylenediacryloyl chloride and benzophenone-4,4′-dicarboxylic chloride. The precursors are soluble in common organic solvents owing to the presence of perfluoromethyl groups in the chain structure, and insolubilized in the solvents on irradiation with the light. Polybenzoxazole patterns with high resolution as well as high aspect ratio were reproduced by baking the precursor patterns at 300°C. The pattern shrinkage on the conversion to polybenzoxazole was slight. The polybenzoxazole films offered good heat-resistance up to 400°C in addition to good electrical properties.     

Synthesis, structure, and physical properties of 1,11-o-benzeno[2]orthocyclo[2](1,2)tropyliophane

The title compound (2) has been synthesized, the structure and the physical properties of which are investigated by X-ray, spectroscopic analyses, and MO calculations. There exists charge transfer (CT) interaction between the tropylium ion and the facing phenyl ring. From the pK_R⁺ value of 2, it can be clear that the cation 2 is stabilized by the CT interaction. In spite of the presence of bond weakening σ-π orbital mixing, the cation 2 withstands retro[4+4]type bond cleavage, which is quite interesting when compared to a facile cleavage for the congener with anthracene photodimer type structure.     

Selective chemical vapor deposition synthesis of double-wall carbon nanotubes on mesoporous silica

Double-wall carbon nanotubes (DWNTs) have been selectively synthesized over Fe/Co loaded mesoporous silica by catalytic chemical vapor deposition of alcohol. Several silica materials with desired pore diameter and morphology have been investigated for the DWNT growth. The diameter distribution and selectivity of the DWNT are found to depend on the reaction temperature, pore size, and thermal stability of the support material. A high-yield synthesis of DWNTs has been achieved at 900 degrees C over high-temperature stable mesoporous silica. The outer diameter of DWNTs is found to be in the range of 1.5-5.4 nm with a "d" spacing of 0.38 +/- 0.02 nm between inner and outer layers, which is much larger than those of multiwall carbon nanotubes.     

A practical procedure for the synthesis of esonarimod, (R,S)-2-acetylthiomethyl-4-(4-methylphenyl)-4-oxobutanoic acid,an antirheumatic agent (part 1)

An efficient and practical procedure for the synthesis of esonarimod, (R,S)-2-acetylthiomethyl-4-(4-methylphenyl)-4-oxobutanoic acid (1), a new antirheumatic drug, has been developed. The intermediate, 2-methylene-4-(4-methylphenyl)-4-oxobutanoic acid (2), was prepared by Friedel-Crafts acylation of toluene with itaconic anhydride (3) in the presence of aluminum trichloride and nitrobenzene in 63% yield without silica gel column purification. Compound 1 was prepared by Michael addition of 2 with thioacetic acid (4) in 74% yield. Overall, 1 was obtained in 47% yield from 3. The structures and synthetic mechanisms of by-products (five compounds) of 2 were also clarified.     

Aminyl radical cyclization by means of anodic oxidation. Stereoselective synthesis of cis-1-methyl-2,5-disubstituted pyrrolidines

Neutral aminyl radicals generated by anodic oxidation of lithium alkenylamides 2 undergo a stereoselective cyclization to give $\text{cis}$-1-methyl-2,5-disubstituted pyrrolidines 4. Their $\text{cis}$ stereochemistry was confirmed by a comparison with $\text{trans}$-1,2-dimethyl-5-phenylpyrrolidine, the structure of which was established by X-ray crystallographic analysis of its quarternary ammonium bromide 6.     

Investigation on spontaneous ignition of two kinds of organic material with water

A systematic investigation was performed to elucidate the cause of spontaneous ignition of Refuse Derived Fuel (RDF) and Meat Bone Meal (MBM). Heat generation in both RDF and MBM with addition of water liquid and vapor at room temperature was determined by isothermal calorimetry. Compared with water liquid, the heat of wetting by sorption of water vapor at 80% relative humidity and 25 °C was larger, which can raise the temperature of RDF and MBM more than 30 and 56 °C, respectively. Heat generation due to fermentation occurred and the temperature of RDF and MBM reached or exceeded 80 °C after 5 days for RDF and 4 days for MBM at 100% RH. The spontaneous ignition for RDF and MBM results from heat of wetting and fermentation at room temperature and a further exothermic reaction at higher temperature.     

Theoretical study of benzonitrile clusters in the gas phase and their adsorption onto a Au(111) surface

We made theoretical calculations for a benzonitrile molecule and its clusters in the gas phase and as adsorbed on the Au(111) surface, to explain the observation by scanning tunneling microscope, that is, the trimer formation of cyanophenyl porphyrins adsorbed onto the Au(111) surface. With regard to the gas-phase species, ab initio calculations showed that (1) the benzonitrile dimer has a single stable structure that is planar and antiparallel; (2) the trimer has two isoenergetic stable structures, that is, a planar and cyclic structure and an antiparallel and nonplanar one; (3) the clusters are more stable, at low temperatures, than the monomer. For the adsorbed species, we made quantum mechanical/molecular mechanical calculations in which the interaction between the adsorbates and the surface is evaluated in a molecular-mechanical way by using analytical potential functions and an image charge model. Because the stable structures were found to be similar to those in the gas phase, the cluster formation of adsorbed cyanophenyl porphyrins was attributed to the interaction between cyanophenyl groups, which is barely affected by adsorbate-surface interaction. It was also found that the adsorbed cyclic benzonitrile trimer is more stable than the monomer and the dimer because the relative stability is dependent on enthalpy alone. We therefore concluded that the preferential formation of trimers by the adsorbed cyanophenyl porphyrins is due to the negligible contribution of entropy to the relative stability of the adsorbed species and that the adsorption hardly changes the situation found in the gas phase.