Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

A fast atom bombardment mass spectrometric analysis of crown ether complexes [1]

Analyses of crown ether complexes of alkali metal ions and characterization of the complexes formed inm-nitrobenzyl alcohol have been carried out by fast atom bombardment (FAB) mass spectrometry. By using m-nitrobenzyl alcohol as a matrix for measurements, the stoichiometry of the complexes was assessed on the basis of the observed FAB peaks. In addition, the formation of crown ether-alkali metal complexes at a 2 : 1 molar ratio was enhanced by increasing the ionic radius of the metal ion in agreement with previous observations. On these grounds, FAB mass spectrometry may provide a rapid means for investigation of the complexation behavior of crown ethers and the stoichiometry of the complexes.     

Average heat transfer rates measured and numerically analyzed for combined convection of air in an inclined cylindrical enclosure due to both magnetic and gravitational fields

The average heat transfer rates were measured for natural convection of air in a shallow cylindrical enclosure heated from below and cooled from above in a bore space of an inclined super-conducting magnet. Depending on the location of the enclosure in the bore space, the angle of inclination and the strength of magnetic field, the net acceleration force could be arbitrarily varied and in this report, two locations where mostly axial magnetizing force prevails were selected. The average heat transfer rates varied with the angle of inclination due to the change in the total net acceleration of gravitational and magnetizing forces. Numerical computations were also carried out for the similar system under the combined magnetizing and gravitational forces and the computed average Nusselt numbers agreed mostly with the measured results. Detailed flow modes were graphically presented for the computed cases.     

Synthesis and chiroptical properties of optically active poly(ethynylcarbazole) derivatives: Substituent effect on the helix formation

Novel chiral acetylene monomers containing carbazole, 2‐ethynyl‐9‐[(S)‐2‐methylbutoxycarbonyl]carbazole ( 1 ), 3‐ethynyl‐9‐[(S)‐2‐methylbutoxycarbonyl]carbazole ( 2 ), 2‐ethynyl‐9‐[(S)‐2‐methylbutyl]carbazole ( 3 ), and 2‐ethynyl‐9‐[(S)‐4‐methylhexyl]carbazole ( 4 ) were synthesized and polymerized with [(nbd)RhCl]₂? Et₃N. The corresponding polyacetylenes with number‐average molecular weights ranging from 68,700 to 310,000 were obtained in good yields. Poly( 1 ) exhibited a large specific rotation and an intense Cotton effect in toluene, indicating that it formed a helix with predominantly one‐handed screw sense, while the other three polymers showed no evidence for taking a helical structure. Poly( 1 ) largely decreased the CD intensity upon heating from ?10 to 60 °C. Poly( 1 ) showed a Cotton effect in film state in a manner similar to solution state. No chiral amplification was observed in the copolymerization of 1 with achiral 2‐ethynyl‐9‐tert‐butoxycarbonylcarbazole ( 5 ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4450–4458, 2007     

Preparation of a cyclodextrin dimer linked with a bis(picolinyl)cystine moiety and its intra- and intermolecular inclusion behavior

A novel cyclodextrin (CD) dimer linked with a bis(picolinyl)cystine (Cys) moiety was prepared by the coupling of Boc-protected Cys with amino-modified CDs, followed by deprotection of the Boc groups and bispicolinylation. The dimer showed less affinity to an organic guest molecule compared to that of a native CD monomer. It was attributed to an intramolecular inclusion of the pyridine moiety into CD cavity. The dimer caused significant increase of its organic guest affinity by an addition of a copper ion. The included pyridine group may come out of a CD cavity to bind the copper ion and the two CDs included cooperatively and intermolecularly a guest molecule with high affinity.