Comparison of stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry in application to supersonic jet spectrometry

Summary A supersonic jet spectrum of 9,10-dichloroanthracene is measured by stimulated-emission-pumping fluorescence dip spectrometry and conventional fluorescence spectrometry. The performance obtained is compared for these spectrometric methods, providing same information concerned with the energy level of the ground state. The former is more preferential for measurement of a high-resolution spectrum, since the spectral resolution is determined by the linewidth of the dumping laser. On the other hand, the latter is more preferential for measurement with better sensitivity at the expense of the spectral resolution, since the fluorescence throughput can be improved by increasing the slit width of the monochromator.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

Resonance-enhanced multiphoton ionization mass spectrometry using a two-color laser beam generated by stimulated Raman scattering.

Two-color (1+1') resonance-enhanced multiphoton ionization/time-of-flight mass spectrometry (REMPI/TOF-MS) combined with supersonic jet (SSJ) spectrometry has been demonstrated. The methodology uses a two-color laser beam consisting of a Stokes beam generated by stimulated Raman scattering (SRS) and a fundamental beam for the excitation and subsequent ionization of p-dichlorobenzene. The MPI signal was found to be substantially increased when a two-color laser beam was employed. This approach greatly simplifies the analytical system and reduces the cost of the instrumentation required for two-color ionization. The potential advantage of applying this method for the analysis of polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) emitted from an incinerator is discussed.     

Syntheses and characterization of 16‐arm star and star diblock copolymer and AB8 9‐miktoarm star copolymer via NMRP and ROP from dendritic multifunctional macroinitiators

A dendritic macroinitiator having 16 TEMPO‐based alkoxyamines, Star‐16 , was prepared by the reaction of a dendritic macroinitiator having eight TEMPO‐based alkoxyamines, [G‐3]‐OH , with 4,4′‐bis(chlorocarbonyl)biphenyl. The nitroxide‐mediated radical polymerization (NMRP) of styrene (St) from Star‐16 gave 16‐arm star polymers with PDI of 1.19–1.47, and NMPR of 4‐vinylpyridine from the 16‐arm star polymer gave 16‐arm star diblock copolymers with PDI of 1.30–1.43. The ring‐opening polymerization of ε‐caprolactone from [G‐3]‐OH and the subsequent NMRP of St gave AB₈ 9‐miktoarm star copolymers with PDI of 1.30–1.38. The benzyl ether linkages of the 16‐arm star polymers and the AB₈ 9‐miktoarm star copolymers were cleaved by treating with Me₃SiI, and the resultant poly(St) arms were investigated by size exclusion chromatography (SEC). The SEC results showed PDIs of 1.23–1.28 and 1.18–1.22 for the star polymers and miktoarm stars copolymers, respectively, showing that they have well‐controlled poly(St) arms. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1159–1169, 2007.     

Synthesis of 3-hydroxyindolin-2-one alkaloids, (±)-donaxaridine and (±)-convolutamydines A and E, through enolization-Claisen rearrangement of 2-allyloxyindolin-3-ones

Claisen rearrangement triggered by enolization of 2-allyloxyindolin-3-ones with DBU was performed in order to prepare 3-allyl-3-hydroxyindolin-2-ones. Total synthesis of 3-hydroxyindolin-2-one alkaloids, (±)-donaxaridine, as well as (±)-convolutamydines A and E, was achieved by transformation of the allyl moiety of 3-allyl-3-hydroxyindolin-2-ones.     

Alternating copolymers consisting of arylalkyl methacrylates. I. Fluorescence properties of poly(arylalkyl methacrylate-alt-styrene) in organic solution

Alternating and random copolymers of 9-phenanthrylmethyl methacrylate or 2-(9-carbazolyl)ethyl methacrylate with styrene were synthesized and their fluorescence properties were examined. There was no noticeable difference in the spectral features of the alternating and random copolymers in tetrahydrofuran (THF), demonstrating that this type of polymers have no quenching sites in the polymer chains. The fluorescence quenching studies indicated that the alternating copolymers permitted singlet-state energy migration as efficiently as the corresponding random copolymers but less efficiently than the random copolymers with higher chromophore contents. These results strongly suggest that to be chromophores close to each other is most important for facilitation of an intramolecular energy migration. © 1995 John Wiley & Sons, Inc.     

Vibrational spectra and rotational isomerism of ethyl trichloroacetate

The IR and Raman spectra of ethyl trichloroacetate (E-TCA) and its deuterate (E-TCA-d₅) have been measured in the liquid, glassy and crystalline states. Vibrational assignment was made by referring to isotopic wavenumber-shift, characteristic group frequencies of related esters and with the aid of a normal coordinate calculation on E-TCA and E-TCA-d₅. It is suggested that in the liquid and glassy states there exist two molecular forms (trans—trans—trans and trans—trans—gauche) with regard to the internal rotations about the ClC---C---O---CH₂CH₃ axis, and that the former persists in the crystalline state. The band pairs of E-TCA and the other ethyl esters are discussed in relation to the nature and number of rotational axes, effect of the heavy trichloromethyl group, and enhancement of band intensity by vibrational coupling.     

Analysis of thermal decomposition products arising from polyvinyl chloride analogs by supersonic jet/multiphoton ionization/mass spectrometry

Polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) were thermally decomposed at 200-500 degrees C, and the reaction products measured by supersonic jet/multiphoton ionization/mass spectrometry. No precursor molecules of dioxins, such as chlorobenzene, were observed from PVC, although benzene was produced as one of the major components. On the other hand, a large peak corresponding to chlorobenzene was observed, when CPVC was used as a sample. These results suggest that the release of hydrogen chloride and aromatic ring formation occur efficiently and produce chlorinated aromatic hydrocarbons only when excess chlorine atoms are present in the chain of PVC. This method, which has very high selectivity is preferred for trace analysis of specific compounds such as dioxin precursors in a complex mixture. Isomer-selective analysis, e.g. detection of o-, m-, and p-dichlorobenzenes, is also demonstrated in this study.     

Cation-pi interactions of a thiocarbonyl group and a carbonyl group with a pyridinium nucleus

Attractive interactions between a thiocarbonyl group and a pyridinium nucleus, and between a carbonyl group and a pyridinium nucleus have been proven by (1)H and (13)C NMR studies, UV-vis spectral analyses, and X-ray crystallographic analyses of nicotinic amides 1 and 3, and pyridinium salts 2 and 4. Comparison of the Deltadelta values, which are the differences in the chemical shifts with reference compounds 5 or 6, showed that the absolute Deltadelta values of 2 and 4 are much larger than those of 1 and 3. In the UV-vis spectra, the n-->pi absorption of the C=S group of 2a exhibited a significant blue shift in CHCl(3). X-ray crystallographic analysis of 1-4 clearly showed that the C=S group of 2a and the C=O group of 4 are very close to the pyridinium moiety compared to the case of 1 and 3. In addition, the X-ray crystal packing structure of 2a showed the C=S group is sandwiched between two pyridinium rings. These experimental results strongly suggested the existence of attractive (C=S)...Py(+) and (C=O)...Py(+) interactions in solution and in crystal. The optimized geometries of 1 and 2 calculated at the HF/6-311G level are in good agreement with their X-ray geometries. MP2/6-311G calculations for the model systems of pyridinium salts 2 and 4 predicted that the electrostatic and induction energies are the major source of the attractive interactions. Since the larger contribution of electrostatic and induction interactions are characteristic features of cation-pi interactions, the (C=S)...Py(+) and (C=O)...Py(+) interactions would be classified as a cation-pi interaction.