A Pilot Survey of Vocal Health in Young Singers

The objective of this study was to determine the incidence of vocal problems in young choir singers and to correlate vocal problems with demographic and behavioral information. A questionnaire addressing vocal habits and hygiene was offered to 571 young choir singers, up to 25 years of age, who sing at least weekly; 129 (22.6%) responded. More than one-half of the respondents had experienced vocal difficulty, particularly older adolescents. Detrimental behaviors and circumstances surveyed were not reflective of the incidence of vocal difficulty, except for morning hoarseness, chronic fatigue, insomnia, and female gender after puberty. Voice care professionals should be aware that self-reported voice difficulties are common among young choral singers, especially postpubescent girls, and children with symptoms consistent with reflux (morning hoarseness) and emotional stress (insomnia). Laryngologists should communicate with choral conductors and singing teachers to enhance early identification and treatment of children with voice complaints, and to develop choral educational strategies that help decrease their incidence.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Characterization of the Reaction of Chloroacetaldehyde with Single and Double Stranded DNA

Chloroacetaldehyde reacts with viral M13mp18 single and double stranded DNA to form the highly fluorescent adducts, etheno-AMP and etheno-CMP.

Absorbance and fluorescence spectroscopy can be used to monitor and characterize these reactions. Both single and double stranded DNA showed increases in the absorbance following reaction with the aldehyde. The fluorescence also increased in these two groups and continued to rise with increasing time of incubation until a point of saturation was reached. The fluorescence of the double stranded moiety was considerably enhanced following reaction with the aldehyde while that of the single stranded population was not, making this method appropriate for the separation of small quantities of the two populations of DNA.     

Application of the single comparator method to instrumental photon activation analysis

Journal of Radioanalytical and Nuclear Chemistry - Instrumental photon activation analysis (IPAA) is nondestructive and multi-elemental analysis method like instrumental neutron activation...     

Twist-Bend Nematic Glasses: The Synthesis and Characterisation of Pyrene-based Nonsymmetric Dimers

A selection of pyrene-based liquid crystal dimers have been prepared, containing either methylene-ether or diether linked spacers of varying length and parity. All the diether linked materials, CBOnO.Py (n=5, 6, 11, 12), exhibit conventional nematic and smectic A phases, with the exception of CBO11O.Py which is exclusively nematic. The methylene-ether linked dimer, CBnO.Py, with an even-membered spacer (n=5) was solely nematogenic, but odd-members (n=6, 8, 10) exhibited both nematic and twist-bend nematic phases. Replacement of the cyanobiphenyl fragment by cyanoterphenyl giving CT6O.Py, gave elevated melting and nematic-isotropic transition temperatures, and SmA and SmC_A phases were observed on cooling the nematic phase. Intermolecular face-to-face associations of the pyrene moieties drive glass formation, and all these materials have a glass transition temperature at or above room temperature. The stability of the glassy twist-bend nematic phase allowed for its study using AFM, and the helical pitch length, P_TB, was measured as 6.3 and 6.7 nm for CB6O.Py and CB8O.Py, respectively. These values are comparable to the shortest pitch of a twist-bend nematic phase measured to date.     

Features of Fundamental- and Subharmonics ECR Heating in a Magnetic Trap

We compare the efficiency of microwave heating of electrons in a dense plasma at the fundamental harmonics ( = eH/(mc)) and at the subharmonics ( = eH/(2mc)) of the electron gyrofrequency. In particular, recent experimental results showing a higher efficiency of microwave heating at the frequency equal to one half of the electron gyrofrequency are analyzed. Equations describing the nonlinear subharmonic electron cyclotron resonance (ECR) heating are derived for an arbitrary geometry of the microwave field. If the microwave field has the vacuum polarization, then the microwave power absorbed by electrons at the fundamental harmonic of the electron gyrofrequency in rarefied plasmas exceeds by many orders of magnitude the corresponding power absorbed by electrons in the case of nonlinear heating at one half of the electron gyrofrequency. However, it is shown that this difference in a dense plasma does not exceed one order of magnitude, which is explained by the effect of depression of the resonance component of the microwave field. In this case, the efficiency of the formation of high-energy electron population can be influenced not only by the energy-deposition rate but mainly by the stability condition of an electron in the magnetic trap. It is shown that a twofold decrease in the magnetic field, necessary to satisfy the ECR condition at one half of the electron gyrofrequency, leads to a dramatic shortening of the hot-electron lifetime in a magnetic trap and, in turn, to a dramatic decrease in the energy-deposition efficiency. We discuss the dependence of the electron heating on the effect of quasi-static enhancement of the microwave field near a target located in a magnetic trap for the generation of X-ray emission.     

Determination of lead, copper and manganese by graphite furnace atomic absorption spectrometry after separation/concentration using a water-soluble polymer

In this study, a water-soluble polymer, polyvinylpyrrolidinone (PVP) having chelating functionalities was used for the preconcentration and separation of traces of Pb, Cu, Ve and Mn prior to their determination by graphite furnace atomic absorption spectrometry. For this purpose, the sample and the PVP solutions were mixed and the metal bound polymer was precipitated by adding the mixture onto acetone. The precipitate was separated by decantation and dissolved with water. By increasing the ratio of the volumes of sample to water used in dissolving the precipitate, the analyte elements were concentrated as needed. The concentration of trace elements was determined using graphite furnace atomic absorption spectrometry. The analyte elements in matrix free aqueous solutions were quantitatively recovered. The validity of the proposed method was checked with a standard reference material (NIST SRM 1577b bovine liver) and spiked fruit juice, sea water and mineral water samples. The analytical results were found to be in good agreement with certified and added values. Detection limits (3δ) were 1.7, 3.6 and 4.1 μg l⁻¹ for Pb, Cu and Mn, respectively, using 10 μl of sample volume. The method is novel and can be characterized by rapidity, simplicity, quantitative recovery and high reproducibility.     

Determination of lead and nickel in Apple-Leaves and sea-water by electrothermal atomic absorption spectrometry after solid-phase extraction using Chromosorb-107 filled in a syringe

Lead and nickel were concentrated and separated after sorbing on Chromosorb-107 filled in a syringe prior to their determination by electrothermal atomic absorption spectrometry. To retain the analytes, the sample solution treated with or without ammonium pyrolidine dithiocarbamate (APDC) was drawn into the syringe filled with Chromosorb-107 and discharged back manually. Then the analyte elements were eluted by drawing and discharging the suitable eluent. The optimum experimental conditions for quantitative recoveries of analytes (amount of sorbent, pH of sample, concentration and kind of eluent, flow rates of sample and eluent and adding of the effect of complexing agent) were investigated. Nickel was quantitatively retained at pH6 irrespective of whether it was complexed with APDC while the quantitative sorption of lead was achieved at pH8 only if it was treated with APDC prior to passing through the sorbent. The lead and nickel retained on the sorbent were eluted drawing and discharging 4.5 M HNO(3), respectively. If the concentration of analyte elements in the sample were too low to be detected, then they were concentrated by increasing the ratio of sample value to eluent volume as needed. The lead and nickel in spiked sea-water samples and in certified reference Apple-Leaves (NIST SRM 1515) standards were quantitatively (95%) recovered with R.S.D. of around +/-2%.