Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.     

Thermal transformation of polyacrylonitrile deposited on SBA-15 type silica

Thermogravimetry, diffuse reflectance infrared Fourier transform spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used for the studying of thermally induced structural changes of polyacrylonitrile (PAN) deposited on the surface of SBA-15 type mesoporous silica. Polymer was introduced onto the support by the precipitation polymerization of acrylonitrile in aqueous suspension of SBA-15. Low temperature transformation (to 723?K) of the deposited PAN was analyzed. It was found that at about 523?K, exothermic cyclization of polymer chains to the so-called ladder form of PAN occurred. However, the total cyclization of PAN required higher carbonization temperatures, at which gradual dehydrogenation followed by graphitization was initiated. XPS revealed that the cyclic form of PAN and a relatively large amount of carbonyl species, formed during the carbonization of the PAN/SBA-15 composite at 623?K, were responsible for the high sorption capacity in the methyl?Cethyl ketone (MEK) vapor elimination. The efficiency in the MEK adsorption was also influenced by the content of PAN-derived carbon deposited on the SBA-15 surface.     

Isomer-specific influences on the composition of reaction intermediates in dimethyl ether/propene and ethanol/propene flame

This work provides experimental evidence on how the molecular compositions of fuel-rich low-pressure premixed flames are influenced as the oxygenates dimethyl ether (DME) or ethanol are incrementally blended into the propene fuel. Ten different flames with a carbon-to-oxygen ratio of 0.5, ranging from 100% propene (phi = 1.5) to 100% oxygenated fuel (phi = 2.0), are analyzed with flame-sampling molecular-beam mass spectrometry employing electron- or photoionization. Absolute mole fraction profiles for flame species with masses ranging from m/z = 2 (H2) to m/z = 80 (C6H8) are analyzed with particular emphasis on the formation of harmful emissions. Fuel-specific destruction pathways, likely to be initiated by hydrogen abstraction, appear to lead to benzene from propene combustion and to formaldehyde and acetaldehyde through DME and ethanol combustion, respectively. While the concentration of acetaldehyde increases 10-fold as propene is substituted by ethanol, it decreases as propene is replaced with DME. In contrast, the formaldehyde concentration rises only slightly with ethanol replacement but increases markedly with addition of DME. Allyl and propargyl radicals, the dominant precursors for benzene formation, are likely to be produced directly from propene decomposition or via allene and propyne. Benzene formation through propargyl radicals formed via unsaturated C2 intermediates in the decomposition of DME and ethanol is negligibly small. As a consequence, DME and ethanol addition lead to similar reductions of the benzene concentration.     

A new strategy towards ultra stable mesoporous titania with nanosized anatase walls

A new and generally applicable synthesis procedure is developed in order to synthesise micelle-templated mesoporous titania built up of nanosized anatase walls with thermal stability up to 600 degrees C.     

Biofuel Combustion Chemistry: From Ethanol to Biodiesel

Biofuels, such as bio‐ethanol, bio‐butanol, and biodiesel, are of increasing interest as alternatives to petroleum‐based transportation fuels because they offer the long‐term promise of fuel‐source regenerability and reduced climatic impact. Current discussions emphasize the processes to make such alternative fuels and fuel additives, the compatibility of these substances with current fuel‐delivery infrastructure and engine performance, and the competition between biofuel and food production. However, the combustion chemistry of the compounds that constitute typical biofuels, including alcohols, ethers, and esters, has not received similar public attention. Herein we highlight some characteristic aspects of the chemical pathways in the combustion of prototypical representatives of potential biofuels. The discussion focuses on the decomposition and oxidation mechanisms and the formation of undesired, harmful, or toxic emissions, with an emphasis on transportation fuels. New insights into the vastly diverse and complex chemical reaction networks of biofuel combustion are enabled by recent experimental investigations and complementary combustion modeling. Understanding key elements of this chemistry is an important step towards the intelligent selection of next‐generation alternative fuels.     

Air-coupled ultrasonic assessment of wood veneer

Air-coupled ultrasound (ACU) provides a tool to evaluate wood samples of small or moderate thickness (<30 mm) thereby avoiding direct contact or liquid coupling. Results of through-transmission ACU measurements on wood veneer samples and related products are reported with respect to a wide variety of quality aspects. Fluctuations in the averaged received signal levels appear to be correlated to the presence of natural or machine-induced thickness and density variations, flaws and grain damage, errors produced by the manufacturing process, insufficient bonding on a substrate, etc. In addition it is seen that the variability of the signal levels enables to distinguish between quarter and crown areas.     

Influence of surfactant concentration on the surface morphology of hollow silica microspheres and its explanation

The surface morphology of hollow silica microspheres has influence on their applications. After a thorough investigation of the deposition of silica nanoparticles on polystyrene (PS) beads and the surface morphology and texture of the resultant hollow silica shells with scanning electron microscopy, transmission electron microscopy, and N2-sorption measurements, the influence of surfactant [cetyltrimethylammonium bromide (CTAB)] concentration on the surface morphology of hollow silica microspheres templated by PS beads is explained. Previously, CTAB was believed to turn the surface charge of PS beads from negative into positive so that negatively charged silica could be deposited on the PS template. Here, we show CTA+ cations preferentially assemble with silica species to form silica-CTA+ composite nanoparticles. Since the zeta potential of silica-CTA+ composite nanoparticles is smaller than that of pure silica nanoparticles, these composite nanoparticles encounter less repulsion when they are deposited on the surface of PS beads and close to each other. As more CTAB is added, the silica-CTA+ nanoparticles are less negatively charged, and more compact and smooth hollow silica microspheres are obtained.     

Determination of the angular and energy dependence of hard constituent scattering from π0 pair events at the CERN intersecting storage rings

We present data on proton-proton collisions, obtained at the CERN Intersecting Storage Rings, in which two roughly back-to-back π⁰'s of high transverse momentum (p_T) were produced. The angular distribution of the dipion axis relative to the collision axis is found to be independent of both the effective mass m of the dipion system and the centre-of-mass energy √s of the proton-proton collision. The cross-sections $\text{d}\text{σ}\text{d}\text{m}$ at the values of √s satisfy a scaling law of the form $\text{d}\text{σ}\text{d}\text{m}\text{=}\text{G(x)}\text{m}{}^{\mathrm{n}}\text{,}\text{where}\text{x = m(π}{}^0\text{, π}{}^0\text{)//trs}\text{and}\text{n = 6.5 ± 0.5}$. We show from our data that the leading π⁰ carries most of the momentum of the scattered parton. Given this fact, the axis of the dipion system follows closely the direction of the scattered constituents, and we exploit this to determine the angular dependence of the hard-scattering subprocess. We also compare our data with the lowest order QCD predictions using structure functions as determined in deep-inelastic scattering and fragmentation functions from electron-positron annihilation.     

High pT π0 production from αα and αp collisions at the CERN ISR

The invariant cross sections for π⁰ meson production in alpha—alpha and alpha—proton collisions at the ISR were meas- ured up to transverse momenta of $\text{7}\text{GeV}\text{c}$ and $\text{8}\text{GeV}\text{c}$, respectively. These measurements are compared with π⁰ production in pp collisions at the same values of $\text{s}\text{/}$nucleon, and the variation of the nuclear A-dependence with p_T is determined.