Complete Oxidation of Methane over Palladium Supported on Alumina Modified with Calcium,Lanthanum,and Cerium Ions

The activity and thermal stability of Pd/Al_2O_3 and Pd/(Al_2O_3 MO_x)(M=Ca,La,Ce) palladium catalysts in the reaction of complete oxidation of methane are presented in this study.The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide.Then they were impregnated with palladium nitrate solution.The catalysts with unmodified alumina had a high surface area.The activity and thermal stability of the alumina- supported catalyst was also very high.The introduction of calcium,lanthanum,or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method.These modifiers decreased the activity of palladium catalysts,and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al_2O_3.The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Ultrafast photofragmentation dynamics of molecular iodine driven with timed XUV and near-infrared light pulses

Photofragmentation dynamics of molecular iodine was studied as a response to the joint illumination with femtosecond 800 nm near-infrared and 13 nm extreme ultraviolet (XUV) pulses delivered by the free-electron laser facility FLASH. The interaction of the molecular target with two light pulses of different wavelengths but comparable pulse energy elucidates a complex intertwined electronic and nuclear dynamics. To follow distinct pathways out of a multitude of reaction channels, the recoil of created ionic fragments is analyzed. The delayed XUV pulse provides a way of following molecular photodissociation of I(2) with a characteristic time-constant of (55 ± 10) fs after the laser-induced formation of antibonding states. A preceding XUV pulse, on the other hand, preferably creates a 4d(-1) inner-shell vacancy followed by the fast Auger cascade with a revealed characteristic time constant τ(A2)=(23±11) fs for the second Auger decay transition. Some fraction of molecular cationic states undergoes subsequent Coulomb explosion, and the evolution of the launched molecular wave packet on the repulsive Coulomb potential was accessed by the laser-induced postionization. A further unexpected photofragmentation channel, which relies on the collective action of XUV and laser fields, is attributed to a laser-promoted charge transfer transition in the exploding molecule.     

Synthesis of transparent silica aerogels using tetraalkylammonium fluoride catalysts

Tetraalkylammonium fluoride salts have been employed as catalysts for the synthesis of silica aerogels by a two-step, sol–gel method. Aerogel materials were characterized by N₂ physisorption and SEM. The effect of the type of catalyst on the optical transparency of obtained aerogels has been examined. It has been found that such compounds allow the synthesis of silica aerogels with the highest optical transmittance ever reported for such materials. The optimal catalysts are tetrabutyl and tetraoctyl ammonium fluoride, with which aerogels with transparency as high as 96% and extinction coefficient as low as 3.5 m⁻¹ can be prepared.     

Wave-function mapping of InAs quantum dots by scanning tunneling spectroscopy

Scanning tunneling spectroscopy is used to investigate the single-electron states and the corresponding squared wave functions of single and freestanding strain-induced InAs quantum dots grown on GaAs(001). Several peaks are found in dI/dV curves, which belong to different single-electron states. Spatially resolved dI/dV images reveal (000), (100), (010), (200), and (300) states, where the numbers describe the number of nodes in [11;0], [110], and [001] directions, respectively. The total number and energetic sequence of states is different for different dots. Interestingly, the (010) state is often missing, even when (200) and (300) states are present. We interpret this anisotropy in electronic structure as a consequence of the shape asymmetry of the dots.     

Complete Oxidation of Methane Alumina Modified with Calcium, over Palladium Supported on Lanthanum, and Cerium Ions

The activity and thermal stability of Pd/Al2O3 and Pd/（Al2O3＋MOx） （M=Ca, La, Ce） palladium catalysts in the reaction of complete oxidation of methane are presented in this study. The catalyst supports were prepared by sol-gel method and they were dried either conventionally or with supercritical carbon dioxide. Then they were impregnated with palladium nitrate solution. The catalysts with unmodified alumina had a high surface area. The activity and thermal stability of the aluminasupported catalyst was also very high. The introduction of calcium, lanthanum, or cerium oxide into alumina support caused a decrease of the surface area in the way dependent on the support precursor drying method. These modifiers decreased the activity of palladium catalysts, and they required higher temperatures for the complete oxidation of methane than unmodified Pd/Al2O3. The improvement of the palladium activity by lanthanum and cerium support modifier was observed only at low temperatures of the reaction.     

Free‐electron laser multiplex driven by a superconducting linear accelerator

Free‐electron lasers (FELs) generate femtosecond XUV and X‐ray pulses at peak powers in the gigawatt range. The FEL user facility FLASH at DESY (Hamburg, Germany) is driven by a superconducting linear accelerator with up to 8000 pulses per second. Since 2014, two parallel undulator beamlines, FLASH1 and FLASH2, have been in operation. In addition to the main undulator, the FLASH1 beamline is equipped with an undulator section, sFLASH, dedicated to research and development of fully coherent extreme ultraviolet photon pulses using external seed lasers. In this contribution, the first simultaneous lasing of the three FELs at 13.4 nm, 20 nm and 38.8 nm is presented.     

Complex networks and banking systems supervision

Comprehensive and thorough supervision of all banking institutions under a Central Bank’s regulatory control has become necessary as recent banking crises show. Promptly identifying bank distress and contagion issues is of great importance to the regulators. This paper proposes a methodology that can be used additionally to the standard methods of bank supervision or the new ones proposed to be implemented. By this, one can reveal the degree of banks’ connectedness and thus identify “core” instead of just “big” banks. Core banks are central in the network in the sense that they are shown to be crucial for network supervision. Core banks can be used as gauges of bank distress over a sub-network and promptly raise a red flag so that the central bank can effectively and swiftly focus on the corresponding neighborhood of financial institutions. In this paper we demonstrate the proposed scheme using as an example the asset returns variable. The method may and should be used with alternative variables as well.     

A high-harmonic generation source for seeding a free-electron laser at 38 nm

Direct seeding with a high-harmonic generation (HHG) source can improve the spectral, temporal, and coherence properties of a free-electron laser (FEL) and shall reduce intensity and arrival-time fluctuations. In the seeding experiment sFLASH at the extreme ultraviolet FEL in Hamburg FLASH, which operates in the self-amplified spontaneous emission mode (SASE), the 21st harmonic of an 800 nm laser is refocused into a dedicated seeding undulator. For seeding, the external light field has to overcome the noise level of SASE; therefore, an efficient coupling between seed pulse and electron bunch is mandatory. Thus, an HHG beam with a proper divergence, width, beam quality, Rayleigh length, pointing stability, single-shot pulse energy, and stability in the 21st harmonic is needed. Here, we present the setup of the HHG source that seeds sFLASH at 38.1 nm, the optimization procedures, and the necessary diagnostics.