Near UV quantum yields for rotenone and piperonyl butoxide

Rotenone and piperonyl butoxide (PBO) mixtures, so-called "synergized" rotenone, are invaluable in fisheries management where they are used to protect the habitat of endangered, native species and promote desirable gamefish populations. Continued use of synergized rotenone is threatened by inadequate control of persistence in surface water, especially where drinking water supplies are impacted. The photochemical kinetics of these chemicals were studied in the laboratory with a goal to better understand their fate in natural water. Disappearance quantum yields (phi) were determined in polychromatic light from fluorescent lamps emitting maximally at 350 nm. Rotenone, PBO and trifluralin, an actinometer, were irradiated as aqueous solutions at 25 or 50 microg L(-1) and the piscicides were determined by electrospray-liquid chromatography-mass spectrometry (ESI-LC-MS). In the photoreactor rotenone and PBO photodegraded with first-order half-lives of 500 and 220 min, respectively, and corresponding quantum yields of 0.00015 and 0.034. Rotenone absorbs sunlight strongly, while PRO does not. Differences in spectal overlap tended to counteract the disparities in phi and, in general, mathematical modeling indicates moderately rapid direct photolysis rates for both substances in surface water.     

A multitechnique surface analytical study of a segmented block copolymer poly(ether-urethane) modified through an H2O radio frequency glow discharge

Recent work in our laboratories has fully characterized the surface region of a segmented poly(ether-urethane) (PEU) extending from the air/polymer interfacial region through bulk depths in the micron range. This characterization utilized energy and angle dependent Electron Spectroscopy for Chemical Analysis (ESCA), Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR–FTIR), and Comprehensive Wettability Profiling (contact angle using a homologous series of liquids) as defined by Zisman. In this study this same multi-analytical-technique approach is used to elucidate changes in these PEU surfaces induced through an H₂O Radio Frequency Glow Discharge (RFGD) plasma. This investigation reports both qualitative and quantitative changes due to the modification treatments as well as the permanency of the changes effected on these surfaces through the plasma treatment. From our analyses, the amount of surface residing polyurethane (hard segment) is observed to increase due to a proposed plasma etching mechanism. Further, the addition of oxygen containing functionality is detected at the modified surfaces unique with respect to the unmodified PEU. These surface modifications which show large increases in wettability, are finally observed to be semi-permanent over a time period of 6 months.     

Salting-in of alcohols in aqueous solutions by tetraalkylammonium bromides at the freezing temperature

The freezing-point depression of the ternary systems tetraalkylammonium bromides-t-butanol-water for the first five homologs of R₄NBr was measured. In the case of Bu₄NBr, the effect of size of the alcohol (methahol ton-butanol) was also investigated. From the corresponding freezing-point data for the binary systems the apparent salting constants were calculated. The true salting constantsk _s were obtained by extrapolation to infinite dilution. These are all very close to zero at the freezing temperature. From the corresponding thermochemical data the temperature dependence ofk _s was calculated, and above 5°C all the R₄NBr salts int-butanol; the salting-in increases with temperature and with the size of the hydrophobic cations. The scaled-particle theory is at present the only one which can account semiquantitatively for the temperature dependence of the salting-in effect. On leave of absence from Chemistry Department, The University, Sheffield S3 7HF, England To whom correspondence should be addressed.     

Importance of dynamic surface tension to the residual water content of fabrics

At the end of the final spin cycle of the laundry process, the residual moisture content (RMC) of fabric is directly related to the dynamic surface tension of the residual water in the fabric. The LaPlace equation for capillary rise predicts that the capillary rise of solutions in a capillary is proportional to the surface tension at the air-liquid interface. If fabric can be considered to be a large ensemble of capillaries due to interfiber spacing, then the RMC of fabrics will be directly related to the surface tension of residual solution in the fabric. The use of a tailored rinse additive has the potential to decrease the surface tension of solution significantly, thus leading to a decrease in the residual water content of the fabric. It is expected that as the surfactant concentration increases the surface tension decreases. Hence, the RMC of fabrics must decrease with increasing surfactant concentration. However, a peak is observed in the RMC of fabrics before the critical micelle concentration (CMC) is reached. Prior to the CMC, it is proposed that a sudden adsorption of surfactant is occurring on the fabric surface leading to a decrease in bulk monomer concentration. The decrease in free monomer concentration should result in an increase in the equilibrium surface tension of the residual solution leading to a concomitant increase in RMC. Because the dynamic surface tension is measured on a short time scale (on the order of milliseconds), there will be less adsorption of monomer onto the newly created air-liquid interface of the bubbles during the measurement process. This decrease in adsorption should lead to a pronounced increase in the dynamic surface tension. This indeed was observed. The RMC correlates very well with the dynamic surface tension of the residual solution.     

Reduction of the pertechnetate anion with bidentate phosphine ligands

The reduction of ammonium pertechnetate with bis(diphenylphosphino)methane (dppm), and with diphenyl-2-pyridyl phosphine (Ph(2)Ppy), has been investigated. The neutral Tc(II) complex, trans-TcCl(2)(dppm)(2) (1), has been isolated from the reaction of (NH(4))[TcO(4)] with excess dppm in refluxing EtOH/HCl. Chemical oxidation with ferricinium hexafluorophosphate results in formation of the cationic Tc(III) analogue, trans-[TcCl(2)(dppm)(2)](PF(6)) (2). The dppm ligands adopt the chelating bonding mode in both complexes, resulting in strained four member metallocycles. With excess PhPpy, the reduction of (NH(4))[TcO(4)] in refluxing EtOH/HCl yields a complex with one chelating Ph(2)Ppy ligand and one unidentate Ph(2)Ppy ligand, mer-TcCl(3)(Ph(2)Ppy-P,N)(Ph(2)Ppy-P) (3). The cationic Tc(III) complexes, trans-[TcCl(2)(Ph(2)P(O)py-N,O)(2)](PF(6)) (4) and trans-[TcCl(2)(dppmO-P,O)(2)](PF(6)) (5) (Ph(2)P(O)py = diphenyl-2-pyridyl phosphine monoxide and dppmO = bis(diphenylphosphino)methane monoxide), have been isolated as byproducts from the reactions of (NH(4))[TcO(4)] with the corresponding phosphine. The products have been characterized in the solid state and in solution via a combination of single-crystal X-ray crystallography and spectroscopic techniques. The solution state spectroscopic results are consistent with the retention of the bonding modes revealed in the crystal structures.     

Synthesis of N-Fmoc 3-(4-(di-(tert-butyl)phosphonomethyl)phenyl)pipecolic acid as a conformationally constrained phosphotyrosyl mimetic suitably protected for peptide synthesis

Phosphonomethylphenylalanine (Pmp, 2) has shown wide utility as a hydrolytically stable phosphtyrosyl (pTyr, 1) mimetic, particularly in Src homology 2 (SH2) domain-binding peptides. (2S,3R)-3-(4-(phosphonomethyl)phenyl)pipecolic acid (3) represents a variant of Pmp having φ and χ₁ torsion angles constrained through incorporation into the piperidinyl ring structure contained within pipecolic acid. Reported herein is the enantioselective preparation of 3, in an orthogonally protected form (4) suitable for use in peptide synthesis. Stereochemistries at both the 2- and 3-positions are derived inductively from a single chiral center provided by the commercially available Evans chiral auxiliary, (4S)-4-benzyl-1,3-oxazolidin-2-one. Incorporation of 4 into a Grb2 SH2 domain-directed tripeptide (18) showed that Grb2 SH2 domain-binding affinity was reduced relative to the parent Pmp-containing tripeptide (19). Although conformational constraint did not enhance affinity in this case, novel amino acid analogue 4 may serve as a useful tool for the induction of defined phosphotyrosyl geometry in peptides directed at other signal transduction targets.     

Superdeformed bands in195Tl

Two superdeformed (SD) bands have been found and assigned to¹⁹⁵Tl on the basis of excitation function and cross bombardment results. The two bands are almost identical in transition energies to those observed in¹⁹³Tl. They are signature partners with a splitting, presumably due to the proton i_13/2 (=5/2) orbital, characteristic of all known SD bands in the thallium isotopes. Their alignments relative to the¹⁹³Tl bands were found to be zero.On leave from Comision National de Energia Atomica 1429 Buenos Aires, Argentina.     

Kinetic energy dependence of the reactions of N+ and N2+ with molybdenum

Mass-selected beams of N⁺ and N₂⁺ in the energy range 5–50 eV react with molybdenum to produce a surface nitride. The relative reaction cross section for N⁺ reaction is higher than that of N₂⁺ in the range 5–25 eV and N₂⁺ exhibits a reaction threshold near 7 eV. The N₂⁺ threshold suggests collisional dissociation prior to reaction.     

Electrically actuated, pressure-driven microfluidic pumps

In order to make the lab-on-a-chip concept a reality, it is desirable to have an integrated component capable of pumping fluids through microchannels. We have developed novel, electrically actuated micropumps and have integrated them with microfluidic systems. These devices utilize the build-up of electrolysis gases to achieve pressure-driven pumping, only require small voltages (approximately 10 V), and have approximate dimensions of 5 cm x 3 cm x 2 cm. Furthermore, these micropumps are composed of relatively inexpensive materials, and the reversible sealability of their poly(dimethylsiloxane) body to different microfluidic arrays enables repeated uses of the same pump. Under an applied potential of 10 V, three different micropumps had average flow rates of 8-13 microL min(-1) for water being pumped through five different 2 cm-long, 5500 microm(2) cross-sectional-area channels in poly(methyl methacrylate), in approximate agreement with predicted pump rates. We have also evaluated pump operation at the lower applied potential of 8 V and observed an average flow rate of 6.1 microL min(-1) for a pump-channel system. The current micropump design is capable of sustaining pumping pressures in the range of 300 kPa. The various advantages of these micropumps make them well suited for use in lab-on-a-chip analysis techniques.