Separation and determination of m-phenoxybenzaldehyde reaction products by capillary gas chromatography

A capillary GC method employing an internal standard has been developed and successfully used for quantitative determination both of the raw materials used for the manufacture of m-phenoxybenzaldehyde and for the components of the reaction mixtures obtained at various stages of the development of the process. A complete analysis can be performed in a single temperature programmed run.     

Analytic theory for the determination of velocity and stability of bubbles in a Hele-Shaw cell

An asymptotic theory is presented for the determination of velocity and linear stability of a steady symmetric bubble in a Hele-Shaw cell for small surface tension. In the first part, the bubble velocity U relative to the fluid velocity at infinity is determined for small surface tension T by determining a transcendentally small correction to the asymptotic series solution. It is found that for any relative bubble velocity U in the interval (U _c , 2), solutions exist at a countably infinite set of values of T (which has zero as its limit point) corresponding to the different branches of bubble solutions. The value of U _c decreases monotonically from 2 to 1 as the bubble area increases from 0 to . However, for a bubble of an arbitrarily given size, as T 0, a solution exists on any given branch with the relative bubble velocity U satisfying the relation 2–U=cT ^2/3, where c depends on the branch but is independent of the bubble area. The analytical evidence further suggests that there are no solutions for U>2. These results are in agreement with earlier analytical results for a finger.In Part II an analytic theory is presented for the determination of the linear stability of the bubble in the limit of zero surface tension. Only the solution branch corresponding to the largest possible U for given surface tension is found to be stable, while all the others are unstable, in accordance with earlier numerical results.This research has been supported by National Science Foundation Grant DMS-8713246. Partial support was also provided by the NASA Langley Research Center (NAS1-18605) while the author was in residence at the Institute of Computer Applications in Science and Engineering.     

Flow and heat transfer with prescribed skin friction in a rotating fluid

This paper investigates the rotating flow and heat transfer of a viscous fluid induced by a stretching surface. The nonlinear problem subject to a given skin friction at the boundary is solved. Analytic solution is obtained using homotopy analysis method. The velocity, temperature, and stretching velocity is calculated for different values of the rotation parameter (λ). The obtained results are compared with the well known results of rotating flow induced by a stretching surface by using four sets of boundary conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Bentonite-modified electrochemical sensors: a brief overview of features and applications

Bentonites are promising materials for electrochemical sensing because of their unique physicochemical properties. They have relatively high surface area, good adsorption and ion-exchange ability, highly tunable surface and interlayer composition, non-toxic nature, and excellent biocompatibility. Moreover, they are outstanding substrates for stable immobilization of different functional moieties. The primary focus of this review article is to highlight the applications of bentonite-modified electrodes for the analysis of organic and inorganic analytes in different matrices. A brief summary on the necessity of analysis of different compounds is provided. For the first time, features and applications of bentonite-modified electrodes are critically appraised. The key features of bentonite-modified electrodes that enhance their electrocatalytic activity toward detection of certain target analytes are highlighted. At the end, an account of current status of bentonite-modified electrodes along with future research directions is provided.     

New heteroleptic palladium(II) dithiocarbamates: synthesis,characterization, packing and anticancer activity against five different cancer cell lines

Two new heteroleptic palladium(II) complexes have been synthesized by reacting equimolar quantities of palladium(II) chloride, sodium 4‐(2‐methoxyphenyl)piperazine‐1‐carbodithioate and diphenyl‐p‐tolylphosphine ( 1 ) or tri‐p‐tolylphosphine ( 2 ). Complexes 1 and 2 have been characterized using elemental analysis, Fourier transform infrared spectroscopy, multinuclear NMR (¹H, ¹³C and ³¹P) spectroscopy and single‐crystal X‐ray analysis. The latter technique confirms a pseudo square‐planar geometry in which two adjacent positions are occupied by bidentate dithiocarbamate while chloro and substituted triphenylphosphine are present at the remaining two positions. The anticancer activity of both complexes against five different cancer cell lines (LU – human lung carcinoma, established at UIC, Department of Surgical Oncology; MCF7 – human breast adenocarcinoma, ATCC number HTB‐22?; MDA‐MB‐231 – human breast adenocarcinoma, ATCC number HTB‐26?; Hepa‐1c1c7 – mouse liver hepatoma, ATCC number CRL‐2026?; PC‐3 – human prostate adenocarcinoma, ATCC number CRL‐1435?) was determined by MTT assay, revealing 2 has higher activity than 1 . A drug–calf thymus DNA binding study with UV–visible spectroscopy reveals a higher DNA binding affinity of 2 (3.511 × 10⁴ M^?1) than 1 (4.213 × 10³ M^?1). Density functional theory studies confirm the relatively more stable nature of 2 than 1 . Copyright © 2016 John Wiley & Sons, Ltd.     

On exact solutions for thin film flows of a micropolar fluid

The present paper contains the exact solutions for thin film flows of a micropolar fluid. Thin films are considered for three different geometries namely: (i) flow down an inclined plane, (ii) flow on a moving belt and (iii) flow down a vertical cylinder. The exact solution is obtained for the velocity and micro-rotation in first two cases for both weak and strong concentrations of the microelements. However, the exact expression for the micro-rotation is obtained for the third case and a numerical solution is presented for the velocity. The micro-rotation and velocity fields are sketched and discussed for different values of the material parameters. It is observed that the rotation of the microelements at the boundary increases the velocity when compared with the case when there is no rotation at the boundary.     

One-pot synthesis of CoO–ZnO/rGO supported on Ni foam for high-performance hybrid supercapacitor with greatly enhanced cycling stability

The high specific capacitance along with good cycling stability are crucial for practical applications of supercapacitors,which always demands high-performance and stable electrode materials.In this work,we report a series of ternary composites of CoO-ZnO with different fractions of reduced graphene oxide(rGO) synthesized by in-situ growth on nickel foam,named as CZG-1,2 and 3,respectively.This sort of binder-free electrodes presents excellent electrochemical properties as well as large capacitance due to their low electrical resistance and high oxygen vacancies.Particularly,the sample of CZG-2(CoO-ZnO/rGO 20 mg) in a nanoreticular structure shows the best electrochemical performance with a maximum specific capacitance of 1951.8 F/g(216.9 mAh/g) at a current intensity of 1 A/g.The CZG-2-based hybrid supercapacitor delivers a high energy density up to 45.9 Wh/kg at a high power density of 800 W/kg,and kept the capacitance retention of 90.1% over 5000 charge-discharge cycles.