Use of a chiral surfactant for enantioselective reduction of a ketone

The influence of a chiral surfactant and a polymer-supported chiral additive on reduction of ketones using sodium borohydride will be described. Initial preparations involved methylation of (S)-leucinol to give (2S)-N , N-dimethyl-2-amino-4-methyl-1-pentanol (1) (67%). The chiral surfactant (2) was synthesized by reacting (1) with bromohexadecane (71%). The functionalized styrene for the polymer-supported chiral additive (5) was synthesized by reacting (1) with 4-vinylbenzyl chloride. Polymerization was carried out with 10% of the functionalized monomer (4), 5% cross-linking agent divinylbenzene, and 85% styrene with AIBN as the initiator. The activity of the chiral surfactant and polymeric additive were examined by using them as additives in a standard reduction of 2-pentanone with sodium borohydride to yield (R)- and (S)-2-pentanol (3) (20%). The resulting alcohol was analyzed by polarimetry (ee 9.5%) and also esterified with (2S)-methylbutyric acid prior to characterization by NMR. 13C NMR indicated an enantiomeric excess of 5.2% when the chiral surfactant was used, and 7% when the polymeric additive was used.     

Determination of myo-inositol in a flow-injection system with co-immobilized enzyme reactors and amperometric detection

A selective and sensitive flow-injection system for the determination of myo-inositol (hexahydroxycyclohexane) is described. Inositol dehydrogenase, IDH, lactate dehydrogenase, LDH, and lactate oxidase, LOD, are co-immobilized on porous glass and used in a packed-bed enzyme reactor. myo-Inositol reacts to produce an equivalent amount of hydrogen peroxide, which oxidizes hexacyanoferrate(II) to hexacyanoferrate(III) in a second reactor containing immobilized peroxidase. The hexacyanoferrate(III) is then detected amperometrically at 0 mV vs. SCE in a flow-through detector. The system responds linearly to injected samples of myo-inositol (25 μl) in the concentration range 1–300 μM. The maximum throughput was 90 samples per hour. The IDH/LDH/LOD reactor was stable for at least 5 weeks.     

Preparation of 2,4-diarylquinolines and substituted dihydrobenz-[c]acridines by the condensation of certain c(α),o-dilithiooximes with 2-aminobenzophenones

C(α),O-Dilithiooximes were prepared in an excess of lithium diisopropylamide and condensed with several 2-aminobenzophenones, followed by acid hydrolysis of the oximes to the ketones, which then underwent cyclodehydration and linear dehydration to give substituted quinolines or dihydrobenz[c]acridines.     

The reduction and hydrolysis of some 7,7-diethylpyrazolo[1,2-a]-pyridazine-6,8(7H)dione derivatives

The chemistry of several of the Diels-Alder adducts formed by the reaction of 4,4-diethylpyrazoline-3,5-dione ( 1 ) with conjugated dienes was studied with respect to reduction (hydride and catalytic) and reaction with base. Reaction of the 2,3-dimethyl-1,3-butadiene adduct with lithium aluminum hydride followed by hydrogenation gave 1,3,5,6,7,8-hexahydro-cis-endo-6,7-dimethyl-2,2-diethylpyrazolo[1,2-a]pyridazine ( 11 ). Attempted conversion of this compound to 3,3-diethyl-cis-7,8-dimethyl-1,5-diazacyclononane ( 12 ) gave instead a compound which has been tentatively identified as N-(2,3-dimethyl-4-aminobutyl)-2-ethyl-2-methylbutanaldimine ( 14 ). Lithium aluminum hydride reduction of 4,4-diethylpyrazolidine-3,5-dione ( 22 ) or the adducts formed from 1 and cyclopentadiene or 1,3-cyclohexadiene gave good yields of 4,4-diethylpyrazolidine ( 21 ). This later reduction gave a new and efficient synthetic route to the pyrazolidine ring system. Lithium aluminum hydride reduction of 5,6,7,8-tetrahydro-5,8-ethano-2,2-diethylpyrazolo[1,2-a]pyridazine-1,3(2H)dione ( 26 ) followed by hydrogenolysis led to a high yield of 4,4-diethyl-2,6-diazabicyclo[5.2.2]undecane ( 28 ) which is the first reported example of this ring system. Reaction of several of the adducts with ethanolic potassium hydroxide resulted in the opening of the five-membered ring.     

Novel binding of beryllium to dicarboxyimidazole-based model compounds and polymers

The ligand 4,5-dicarboxyimidazole (H(2)DCI) and its methyl derivative 1-methyl-4,5-dicarboxyimidazole (H(2)MDCI) have been shown to bind to Be(II) forming a zwitterionic species that has been structurally characterized. A new dicarboxyimidazole-based polymer has been prepared and its Be-binding properties have been studied using NMR ((1)H and (9)Be) and fluorescence spectroscopy; it represents a rare example of beryllium binding to a polymer. Models of the mononuclear and polymeric Be(II)-binding sites have been studied using density functional theory (DFT), and the (9)Be NMR chemical shifts of these model materials have been calculated for the purpose of direct comparison to experimentally observed values. Differences in the binding modes of the mononuclear and polymeric species are discussed.     

Selective enzyme amplification of NAD/NADH using coimmobilized glycerol dehydrogenase and diaphorase with amperometric detection

A flow system for substrate recycling of NAD⁺/NADH was set up with an enzyme reactor containing coimmobilized glycerol dehydrogenase (GDH) and diaphorase. The product from the diaphorase catalysis, hexacyanoferrate(II), aws detected amperometrically at a glassy carbon electrode. The amplification factor was 150 for a reactor volume of 100 μ l at a flow-rate of 0.5 ml/min. With a stopped flow of four minutes, the signal increased another 88 times, resulting in a signal amplification of 13 300 times. Equations are derived for the amplification factor and used for a discussion of the optimization of amplification systems. The K_m for GDH with glycerol as a substrate was found to be 5 × 10⁻³ M at pH 8.0. GDH from Cellulomonas sp. was purified on a gel filtration column and the purified enzyme showed a specificity toward NAD⁺, compared to NADP⁺, that was higher than 99.9%. Due to the NAD⁺ specificity of the purified GDH, the enzyme amplification system reported here could be used in detection systems for enzyme immunoassays when using alkaline phosphatase as a label and NADP⁺ as a substrate. The stability of immobilized GDH and diaphorase is several orders of magnitude better than that of alcohol dehydrogenase, which is the enzyme commonly used for NAD⁺-specific detection in these applications.     

A flow-through cell for differential pulse anodic stripping voltammetry

A flow-through voltammetric cell with a hanging mercury drop electrode has been developed to fit the static mercury drop electrode (PAR 303). The design has resulted in a linear increase of sensitivity with flow rate and an enhancement of sensitivity by the wall-jet effect. The cell is used in a flow injection system in which samples are introduced with a R??i?ka—Hansen injector. The mercury drop is held at plating potentials while the sample peak passes through the cell. Stripping is done under stopped flow conditions, to reduce noise, after the sample has been washed completely from the cell. The stripping thus takes place into the carrier electrolyte which always has a constant composition independent of sample constituents. Film-forming interfering species will, however, remain on the surface of the mercury drop. The effect of medium exchange on films produced by l-cysteine is reported. The flow-through medium exchange simplifies deaeration, speeds up analysis and reduces contamination.     

Deoxygenation of supporting electrolytes in stripping voltammetry by glocuse and co-immobilized glocuse oxidase and catalase in a flow system

Carrier solutions for stripping voltammetry in flow systems are deoxygenated by reaction with glucose added to the carrier. The reaction was catalyzed by glocuse oxidase and catalase co-immobilized in an enzyme reactor which was inserted before the injector. The oxygenated was removed at least as efficiently as with nitrogen purging and the voltametric behaviour of cadmium(II), lead(II) and zinc(II) was unaffected by the glucose/gluconic acid system. A particular advantage is the rapid start-up compared to the lengthy purging of carrier solution when nitrogen degassing is used. The enzyme reactor made from porous glass was effective for several months.     

The syntheses of pyridazino[1,2-a] pyridazine derivatives of furan,pyridazine and pyrrole by diels-alder reactions

Diels-Alder adducts were formed in the lead tetraacetate oxidations of substituted cyclic hydrazides of furan, pyridazine and pyrrole dicarboxylic acids in the presence of 1,3-cyclo-hexadiene or 1,3-cyclopentadiene. The products resulting were furo[3,4-g]pyridazino[1,2-a]-pyridazine-6,10-diones, pyridazino[4,5-g]pyridazino[1,2-a]pyridazine-6,11-diones, and pyrrolo-[3,4-g]pyridazino[1,2-a]pyridazine-6,10-diones, respectively. Some hydrogenations and ring opening reactions were studied.     

Hyphenation of capillary high-performance liquid chromatography with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for nano-scale screening of single-bead combinatorial libraries

This paper focuses on the technical aspects of chemical screening from 384-well plate nano-scale single-bead combinatorial libraries. The analytical technique utilized is a combination of capillary liquid chromatography with ultraviolet detection and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The HPLC/MALDI-MS hyphenation is achieved by means of a micro-fraction collector with a peak detection system that automatically collects the peaks onto the MALDI targets for subsequent characterization. Several experimental parameters such as type of 384-well plate, well-plate sealing foils, and a column-switching procedure were investigated using a small test library of nine components. Additionally, the influence of different MALDI matrices, different MALDI targets and sample-spotting techniques on the MALDI detection sensitivity as well as the ruggedness and sample throughput capacity of this technique were studied. Optimum results for the analytes investigated were obtained with 2,5-dihydroxybenzoic acid using on-line mixing of HPLC effluent and matrix solution. To demonstrate the potential of this capillary HPLC/MALDI-TOFMS method, its application to several single-bead libraries was investigated. The instrumental method allowed for the rapid identification and purity assessment of combinatorial libraries with detection limits down to the higher femtomole level using both UV detection and MALDI mass spectrometry.