A comparative investigation of the fatty acid compositions of the seeds of a number of lines of a genetic collection of Gossypium hirsutum

A comparative analysis has been made of the amounts of lipids and their fatty-acid compositions in the seeds of the lines of agenetic collection of cotton plants of the speciesGossypium hirsutum and their hybrids and the variety Tashkent-1. The results obtained on the fatty-acid compositions of some hybrids make it possible to recommend the use of individual lines of cotton plants as donors for improving the food-value indices of cottonseed oil.Institute of Chemsitry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. V. I. Lenin Tashkent State University. Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 173–176, March–April, 1991.     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

Development and characterization of hydroquinone-loaded nanofiber for topical delivery: effect of chitosan

Hydroquinone (HQ) loaded polymer solution was electrospun for its topical application. Nanofibers were then investigated in terms of stability, drug release, and antifungal activity. The effect of chitosan (CS) was investigated on the viscosity, stability, drug release, and antifungal activity of the developed formulation. Results indicate a significantly stable HQ-loaded nanofiber formulation. The addition of CS caused hydration of the drug delivery system and enhanced drug release but reduced its stability. HQ-loaded nanofiber mat showed significant antifungal activity, however, there was no inhibition zone in samples containing CS.     

A Gas Chromatography-Molecular Rotational Resonance Spectroscopy Based System of Singular Specificity

We designed and demonstrated the unique abilities of the first gas chromatography–molecular rotational resonance spectrometer (GC-MRR). While broadly and routinely applicable, its capabilities can exceed those of high-resolution MS and NMR spectroscopy in terms of selectivity, resolution, and compound identification. A series of 24 isotopologues and isotopomers of five organic compounds are separated, identified, and quantified in a single run. Natural isotopic abundances of mixtures of compounds containing chlorine, bromine, and sulfur heteroatoms are easily determined. MRR detection provides the added high specificity for these selective gas-phase separations. GC-MRR is shown to be ideal for compound-specific isotope analysis (CSIA). Different bacterial cultures and groundwater were shown to have contrasting isotopic selectivities for common organic compounds. The ease of such GC-MRR measurements may initiate a new era in biosynthetic/degradation and geochemical isotopic compound studies.     

高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

Examination of Selectivities of Thermally Stable Geminal Dicationic Ionic Liquids by Structural Modification

Dicationic ionic liquids (ILs) are widely used as gas chromatography (GC) stationary phases as they show higher thermal stabilities, variety of polarities, and unique selectivities towards certain compounds. An important aspect contributing to them is that they show multiple solvation interactions compared to the traditional GC stationary phases. Dicationic ILs are considered as combination of three structural moieties: (1) cationic head groups; (2) a linkage chain; and (3) the counter anions. Modifications in these structural moieties can alter the chromatographic properties of IL stationary phases. In this study, a series of nine thermally stable IL stationary phases were synthesized by the combination of five different cations, two different linkage chains, and two different anions. Different test mixtures composed of a variety of compounds having different functional groups and polarities were analyzed on these columns. A comparison of the separation patterns of these different compounds on nine different IL columns provided some insights about the effects of structural modifications on the selectivities and polarities of dicationic ILs.     

多功能两亲梳状聚合物的合成及包覆荧光量子点

利用溶液聚合和成酰胺反应合成了多功能梳状两亲性共聚物,聚(甲基丙烯酸-co-甲基丙烯酸十八酯)-(乙醇胺-乙二胺叶酸)(PSM-EE-FA).用红外光谱(FTIR),核磁共振(1H-NMR)及凝胶渗透色谱(GPC)表征了该聚合物的结构及分子量分布.实验结果证明合成了该聚合物,其数均分子量(Mn)为28600,多分散性为1.375.用该两亲梳状聚合物包覆油溶性CdSe/ZnS量子点,通过相转移作用,得到水溶性靶向量子点(PSM-EE-FA-QDs).该水溶性量子点溶液具有较好的稳定性.通过紫外-可见(UV-Vis)及荧光发射光谱分析对该量子点的光学性质进行研究.结果表明,PSM-EE-FA-QDs的紫外-可见光谱及荧光发射光谱峰形与原量子点基本一致.由于量子点表面聚合物层的形成,峰位发生少量红移.该量子点水溶液的荧光强度是原量子点氯仿溶液的98%,荧光产率是原量子点氯仿溶液的95%.动态光散射(DLS)及透射电镜(TEM)测试结果表明水溶性量子点分布均匀.合成的水溶性量子点不但光学性能稳定,而且聚合物及水溶性量子点的合成方法较为简便.     

Instability investigation of creeping viscoelastic flow in a curved duct with rectangular cross-section

In this paper, instability in the creeping viscoelastic flow inside a curved rectangular duct is investigated numerically for the first time. Using the Criminale–Eriksen–Filbey (CEF) model as the constitutive equation, the governing equations are solved by a second order of finite difference method based on the artificial compressibility algorithm in a staggered mesh. The effects of normal stress differences on the flow stability are investigated. The numerical results obtained indicate that the increase of the negative second normal stress difference of viscoelastic fluid causes stability in the creeping flow in curved ducts, however, the increase of the first normal stress difference intensifies the instability. Furthermore, at the special value of Ψ₂/Ψ₁=?0.5, the interaction of the two normal stress differences results in a stable flow field.