Super acid-induced Pummerer-type cyclization reaction: improvement in the synthesis of chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines

Improved synthesis of four stereoisomeric chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines (1a, b, ent-1a, b) was achieved via the super acid-induced cyclization of chiral N-[1-methyl-2-(phenylsulfinyl)ethyl]-N-(1-phenylethyl)formamides (4a, b, ent-4a, b) using the Pummerer-type cyclization reaction as a key step. The cyclization leading to the isoquinoline ring proceeded in a quantitative manner when trifluoromethane sulfonic acid (TFSA) was used as the super acid, although Friedel-Crafts-type alkylation of 4-phenylsulfanyl TIQ derivatives (5) with benzene used as the solvent accompanied cyclization to yield the 4-phenyl-TIQs (7). The byproduct (7) was exclusively formed when a large excess amount of TFSA was used.     

Reaction of 3,4-disubstituted 1,2,5-oxadiazole 2-oxides with dipolarophiles : Substituent and solvent effect on the reaction courses

A variety of symmetrically or unsymmetrically 3,4-disubstituttd furoxans such as dicyano, dialkyl, diacyl, bis(phenylsulfonyl), N.N'-dialkyldicarbamoyl, 3(or 4)-methyl-4(or -3)-phenyl(or nitro, ethoxy, phenoxy, phenylthio, pyrrolidinyl, phenylsulfonyl), 3(or 4)-ethyl-4(or -3)phcnyl, and 3(or 4)-ethoxy-4(or -3)-phenylsulfonylruroxan reacted with dipolarophiles in toluene or xylene at the refluxing temperature to give nitrone-type 1,3-dipolar cycloadducts, 5-substituted 1-aza-2,8-dioxabicyclo-[3.3.0]octanes and/or 3-substituted 2-isoxazoline 2-oxides. On the other hand, some of the furoxans gave 2-isoxazolines via nitrile oxide 1,3-dipolar cycloaddition in a toluene (or xylene)-DMF solvent at the refluxing temperature.     

Detection of the His-heme Fe2+-NO species in the reduction of NO to N2O by ba3-oxidase from thermus thermophilus

Reaction pathways in the enzymatic formation and cleavage of the N-N and N-O bonds, respectively, are difficult to verify without the structure of the intermediates, but we now have such information on the heme a(3)(2+)-NO species formed in the reaction of ba(3)-oxidase with NO from resonance Raman spectroscopy. We have identified the His-heme a(3)(2+)-NO/Cu(B)(1+) species by its characteristic Fe-NO and N-O stretching frequencies at 539 and 1620 cm(-)(1), respectively. The Fe-NO and N-O frequencies in ba(3)-oxidase are 21 and 7 cm(-)(1) lower and higher, respectively, than those observed in Mb-NO. From these results and earlier Raman and FTIR measurements, we demonstrate that the protein environment of the proximal His384 that is part of the Q-proton pathway controls the strength of the Fe-His384 bond upon ligand (CO vs NO) binding. We also show by time-resolved FTIR spectroscopy that Cu(B)(1+) has a much lower affinity for NO than for CO. We suggest that the reduction of NO to N(2)O by ba(3)-oxidase proceeds by the fast binding of the first NO molecule to heme a(3) with high-affinity, and the second NO molecule binds to Cu(B) with low-affinity, producing the temporal co-presence of two NO molecules in the heme-copper center. The low-affinity of Cu(B) for NO binding also explains the NO reductase activity of the ba(3)-oxidase as opposed to other heme-copper oxidases. With the identification of the His-heme a(3)(2+)-NO/Cu(B)(1+) species, the structure of the binuclear heme a(3)-Cu(B)(1+) center in the initial step of the NO reduction mechanism is known.     

A synthesis of chiral 1,1,3-trisubstituted 1,2,3,4-tetrahydro-beta-carbolines by the Pictet-Spengler reaction of tryptophan and ketones: conversion of (1R,3S)-diastereomers into their (1S,3S)-counterparts by scission of the C(1)-N(2) bond

The Pictet-Spengler cyclization of the imines (3) prepared by the condensation of L-tryptophan methyl ester (1) and aryl methyl ketones (2), using titanium(IV) isopropoxide as an iminating reagent, quantitatively proceeded, when treated with trifluoroacetic acid (TFA) or formic acid, to provide two diastereomers, that is (1S,3S)-1-aryl-3-isopropoxycarbonyl-1-methyl-1,2,3,4-tetrahydro-beta-carbolines (4) and their (1R,3S)-diastereomers (5), of which the diastereomer ratios varied from 1 to 5 depending on the reaction conditions. The (1R,3S)-diastereomers (5) are thermodynamically more stable than their (1S,3S)-congeners (4), as shown by equilibration experiments in TFA. The conversion of 4 to 5 (also 5 to 4) should occur under acidic conditions by cleavage of the C(1)-N(2) bond with complete retention of configuration at the C-3 chiral center. The low diastereo-selectivity observed in the Pictet-Spengler reaction of 1 and 2 is concluded to be a stereochemical outcome under conditions of kinetic control (lower temperature, shorter reaction time), while the high diastereo selectivity with preferential formation of the more stable isomer (5) is the result of thermodynamically controlled experiments (higher temperature, longer reaction time).     

A New Convenient Synthesis of α-Arylpropionic Acid Esters and α-Arylpropionitriles

Various types of α-arylpropionic acid esters were effectively obtained by the coupling reaction of aryl Grignard reagents and α-bromopropionic acid esters in the presence of nickel catalysts. α-Arylpropionitriles, precursors of α-arylpropionic acids, were also synthesized by the reaction of α-methanesulfonyloxypropionitrile and arylcopper reagents prepared from equimolar amount of arylmagnesium halides and copper(I) bromide.     

High-quality lowest-loss-mode lasing in GaAs quasi-stadium laser diodes having unstable resonators

We obtained high-quality lowest-loss-mode lasing in quasi-stadium laser diodes having unstable resonators that consisted of two curved end mirrors and two straight sidewall mirrors. The laser diodes were fabricated by applying a reactive ion etching technique to a metal-organic chemical-vapor deposition-grown graded-index separate-confinement heterostructure single-quantum-well GaAs/AlGaAs structure. The electrode contact area of the laser diodes was formed along unstable periodic orbits, along which the optical beams are localized. Highly directional fan-out beams corresponding to the numerically obtained lowest loss mode were emitted from the end mirrors under CW operation at room temperature.     

Inhibition of Thiol-Mediated Uptake with Irreversible Covalent Inhibitors

Thiol-mediated uptake is emerging as method of choice to penetrate cells. This study focuses on irreversible covalent inhibitors of thiol-mediated uptake. High-content high-throughput screening of the so far largest collection of hypervalent iodine reagents affords inhibitors that are more than 250 times more active than Ellman’s reagent and rival the best dynamic covalent inhibitors. Comparison with other irreversible reagents reveals that inhibition within one series follows reactivity, whereas inhibition across series deviates from reactivity. These trends support that molecular recognition, besides dynamic covalent exchange, contributes significantly to thiol-mediated uptake. The most powerful inhibitors besides the best hypervalent iodine reagents were Fukuyama’s nosyl protecting group and super-cinnamaldehydes that have been introduced as irreversible activators of the pain receptor TRPA1. Considering that several viruses use different forms of thiol-mediated uptake to enter cells, the identification of new irreversible inhibitors of thiol-mediated uptake is of general interest for the discovery of new antivirals.     

Competitive Assay for Theophylline Based on an Abasic Site‐Containing DNA Duplex Aptamer and a Fluorescent Ligand

A fluorescence assay for theophylline, one of the common drugs for acute and chronic asthmatic conditions, has been developed based on an abasic site‐containing DNA duplex aptamer (AP aptamer) in combination with an abasic site‐binding fluorescent ligand, riboflavin. The assay is based on the competitive binding of theophylline and riboflavin at the abasic (AP) site of the AP aptamer. In the absence of theophylline, riboflavin binds to the receptor nucleotide opposite the AP site, which leads to fluorescence quenching of the riboflavin. Upon addition of theophylline, competitive binding occurs between theophylline and riboflavin, which results in an effective fluorescence restoration due to release of riboflavin from the AP site. From an examination of the optimization of the AP aptamers, the complex of riboflavin with a 23‐mer AP aptamer (5′‐TCT GCG TCC AGX GCA ACG CAC AC‐3′/5′‐GTG TGC GTT GCC CTG GAC GCA GA‐3′; X : the AP site (Spacer C3, a propylene residue)) possessing cytosine as a receptor nucleotide was found to show a selective and effective fluorescence response to theophylline; the limit of detection for theophylline was 1.1 μM . Furthermore, fluorescence detection of theophylline was successfully demonstrated with high selectivity in serum samples by using the optimized AP aptamer and riboflavin.     

Core-level photoemission of the Si(1 1 1)– -Ag surface using synchrotron radiation

The evolution of Si 2p core-level photoemission during a structural conversion from the Si (1 1 1)– -Ag to the Si(1 1 1)– -Ag superstructures induced by Ag adatoms adsorption at 140 K was studied using synchrotron radiation. The component from the top-layer Si-trimer atoms on the former surface was found to split into two components in the latter surface. The result is discussed in terms of a relaxation in some of the Si trimers induced by Ag adatoms sitting on the nearby Ag triangles of the -Ag substrate. The intensity ratio between the split components is a key to exclude some structure models proposed so far for the phases.     

Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.