Polymerization of methyl methacrylate under ultrasonic irradiation. Part IV. Effect of ultrasonic irradiation on Grignard catalyst and stereoregularity of the polymers produced in dioxane–tetrahydrofuran mixed solvent

Two series of polymerization of methyl methacrylate with Grignard reagent in dioxane—tetrahydrofuran mixed solvent was carried out under ultrasonic irradiation. In series A, catalyst was added to the mixture of monomer and solvent, and in series B, catalyst was previously mixed with solvent. The effect of ultrasonic irradiation on Grignard catalyst and the microstructure in reacting sites were discussed on the basis of the stereoregularity of the polymers produced. The stereoregularity of the polymers in series A was higher than that in series B. The effect of ultrasonic irradiation on the stereoregularity was completely reversed in series A and B and it increased in the former and decreased in the latter. It was, therefore, assumed that ultrasonic irradiation affected the microstructure in the reacting sites in series A, while it increased the relative amount of R₂Mg which gave polymers with poor stereoregularity in series B.     

Ab initio prediction of conduction band spin splitting in zinc blende semiconductors

We use a recently developed self-consistent GW approximation to present systematic ab initio calculations of the conduction band spin splitting in III-V and II-VI zinc blende semiconductors. The spin-orbit interaction is taken into account as a perturbation to the scalar relativistic Hamiltonian. These are the first calculations of conduction band spin splittings based on a quasiparticle approach; and because the self-consistent GW scheme accurately reproduces the relevant band parameters, it is expected to be a reliable predictor of spin splittings. The results are compared to the few available experimental data and a previous calculation based on a model one-particle potential. We also briefly address the widely used k x p parametrization in the context of these results.     

Sonochemically synthesized core-shell structured Au–Pd nanoparticles supported on γ-Fe2O3 particles

A sample of Au–Pd bimetallic nanoparticles supported on γ-Fe₂O₃ was synthesized in a sonochemically one-pot process. The structural analyses of the synthesized sample were performed by the techniques of X-ray Absorption Fine Structure (XAFS), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and UV–vis spectrometry. Results indicated that the synthesized sample formed a core-shell structure in which a gold core was surrounded by a thin palladium shell. The reaction rate constant for the hydrogenation of cyclohexene of the present sample showed higher value than that of Pd nanoparticles supported on γ-Fe₂O₃ and core-shell structured Au–Pd nanoparticles supported on SiO₂. The present sample is a promising catalyst material which has a high catalytic activity.     

Direct micropatterning of high dielectric BaTiO3 films by laser-induced pyrolysis with a nano-crystalline seeding technique

A direct patterning method of dielectric BaTiO₃ (BT) films is proposed, which applies laser-induced pyrolysis in combination with nano-crystalline seeding technique. A precursor solution of a BT complex alkoxide containing BT nano-crystalline particles with polyvinylpyrollidone (PVP) as dispersion stabilizer was spin-coated on Pt substrate. An Ar⁺ laser beam was focused and scanned on spin-coated BT films, which induced pyrolysis and crystallization of the films with spatial selectivity. Micropatterns were obtained by striping laser-unirradiated regions on the films with HCl aqueous solution. Raman spectra of the micropattern confirmed that the structures were tetragonal crystalline BT. Clear micropatterns with a line width of ca. 3 μm and an interval of 5 μm were formed at PVP concentrations of 25 and 50 kg/m³. The dielectric constant and dissipation factor of the film fabricated at a laser energy density of 27 MW/cm² and a scanning speed of 25 μm/s attained 76.2 and 0.07, respectively, for a measurement frequency of 100 kHz.     

Recent developments of optical fiber sensors for automotive use

Optical fiber sensing technologies are expected to apply for many future electronic control systems in automobiles, because of their inherent outstanding features, such as high noise immunity, high heat resistance, and flexible light propagation paths which can be applied to measure the movements and directions of the mobiles. In this paper, two typical applications of fiber sensing technologies in automobiles are described in detail. The combustion flame detector is one of the typical applications of a fiber spectroscopic technology which utilizes the feature of high noise and heat resistibility and remote sensibility. Measurement of engine combustion conditions, such as the detonation, the combustion initiation, and the air-fuel ratio, have been demonstrated in an experimental fiber sensing method. Fiber interferometers, such as a fiber gyroscope, have great possibilities in future mobile applications because they are applicable to many kinds of measurements for movements and physical variables. An optical fiber gyroscope utilizing the single polarized optical fiber and other optical devices has been developed. Quite an accurate measurement of vehicle position was displayed on a prototype navigation system which installed the fiber gyroscope as a rotational speed sensor.     

Study of Strangeness Photoproduction on the Neutron in the Threshold Region

Photoproduction of the neutral kaon on the deuteron has been investigated at the Research Center for Electron Photon Science, Tohoku University. We constructed the Neutral Kaon Spectrometer-2 for the detection of charged particles from the decay of the neutral kaon and the hyperon. We obtained a momentum distribution of K ⁰ with the inclusive measurement. It was consistent with the previous measurement. The total cross section of γ + d → K ⁰ + Λ + p was estimated from the measured integral cross section of γ + d → Λ + X. The total cross section with respect to the photon energy was compared with the theoretical calculations. It favored the Saclay-Lyon A model calculation with the ratio of the neutral to charged coupling constants of the axial-vector meson, K ₁, as ~ ?1.5. The energy dependence and the magnitude of the total cross section were similar to the total cross section of γ + p → K ⁺ Λ.     

Effect of phosphorus and copper additions on the structure of Pt and Pt–Cu nanoparticles in a radiation-induced reduction method

A facile chemical process has been developed for the preparation of magnetic FeCo nanoparticles. The FeCo nanoparticles were mono-dispersed, obtained by the safe and ecofriendly method, possessed saturation magnetization up to 187 emu/g, and demonstrated excellent chemical stability. In this work, we have studied how to control Fe/Co ratio by variation of precursor ratio, and how to vary particle size from 9.3 to 12.3 nm by surfactant amount used. The cytotoxicity of as-synthesized nanoparticles was investigated after coating with the poly(methyl methacrylate-co-butyl acrylate) by the emulsion process and the results demonstrated high biocompatibility. Similarly, the same synthesis method was used with the single precursor FeO(OH) or Co₃O₄. The results showed that this method can also fabricate 10 nm mono-dispersed spherical Fe₃O₄ particles and self-assembly Co nanoneedles.