Pressure response of Raman spectra of water and its implication to the change in hydrogen bond interaction

In situ Raman spectroscopic measurements of water in the region of OH vibration were conducted up to 0.4 GPa at 23 and 52 degrees C. The frequencies of the decomposed OH stretching bands initially decreased with increasing pressure, reached a minimum at 0.15 GPa and increased up to 0.3 GPa and then decreased, which corresponds to the variations of the strength of hydrogen bonding. This variation was observed at 23 degrees C, but not at 52 degrees C, which suggests a change in pressure dependence on the hydrogen bond interaction between these two temperatures. Based on the equilibration model between hydrogen-bonded and nonhydrogen-bonded molecules, the present experimental results indicate that the pressure variation of the viscosity depends on the ratio of hydrogen-bonded molecules, rather than the strength of hydrogen bonding between molecules.     

In situ monitoring of metal nanoparticle self-assembly on protein-functionalized glass by broadband optical waveguide spectroscopy

Broadband, time-resolved optical waveguide (OWG) spectroscopy has been used for in situ, real-time investigation into the self-assembly of metal nanoparticle monolayers. The OWG spectroscopy makes it possible to use the transverse electric (TE) and transverse magnetic (TM) modes to measure surface plasmon absorption of immobilized metal nanoparticles in two directions, parallel and normal to the waveguide surface. Therefore, this technique can provide direction-dependent information on the metal nanoparticles at the interface. In this paper, a 50-microm-thick glass plate was used as a slab waveguide and the kinetics of Au nanoparticle adsorption on a hemoglobin-functionalized glass substrate was examined in the early stage of self-assembly. The findings show that with the TE mode the surface plasmon resonance (SPR) behavior for immobilized Au nanoparticles is different from that with the TM mode.     

Protein identification by peptide mass fingerprinting and peptide sequence tagging with alternating scans of nano-liquid chromatography/infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry

We have developed a method for protein identification with peptide mass fingerprinting and sequence tagging using nano liquid chromatography (LC)/Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). To achieve greater sensitivity, a nanoelectrospray (nano-ES) needle packed with reversed-phase medium was used and connected to the nano-ES ion source of the FTICR mass spectrometer. To obtain peptide sequence tag information, infrared multiphoton dissociation (IRMPD) was carried out in nano-LC/FTICR-MS analysis. The analysis involves alternating nano-ES/FTICR-MS and nano-ES/IRMPD-FTICR-MS scans during a single LC run, which provides sets of parent and fragment ion masses of the proteolytic digest. The utility of this alternating-scan nano-LC/IRMPD-FTICR-MS approach was evaluated by using bovine serum albumin as a standard protein. We applied this approach to the protein identification of rat liver diacetyl-reducing enzyme. It was demonstrated that this enzyme was correctly identified as 3-alpha-hydroxysteroid dehydrogenase by the alternating-scan nano-LC/IRMPD-FTICR-MS approach with accurate peptide mass fingerprinting and peptide sequence tagging.     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

Mono-aromatic ring-fused versus adjacently di-aromatic ring-fused tetraazaporphyrins: regioselective synthesis and their spectroscopic and electrochemical properties

A method which preferentially produces adjacently di-aromatic ring-substituted tetraazaporphyrins (TAPs) has been developed, and their electrochemical and spectroscopic properties have been studied and compared with those of the corresponding series of mono-aromatic ring-fused TAPs. Mono-aromatic ring-fused TAPs show a split Q-band, and the splitting energy increases with increasing size of the aromatic ring. In addition, for the split Q-bands, the relative intensity of the band at longer wavelength decreases with increasing molecular size of the fused aromatics, compared with the shorter wavelength band. In the di-aromatic ring-fused TAPs, this kind of splitting is not seen, and only a shift of the band is observed. The intensity and band position of the split or unsplit Q-bands are quantitatively evaluated by simultaneous band deconvolution analysis, using both electronic absorption and magnetic circular dichroism spectra. The preparation of these TAP compounds has made it possible to adjust the Q-band position in a stepwise manner between ca. 600 and 750 nm. The first reduction and oxidation potentials of the TAP ring shift negatively with increasing number and size of the fused aromatics. The extent of the shift is found to be very small for the LUMOs but significant for the HOMOs. These spectroscopic and electrochemical properties are almost perfectly reproduced by molecular orbital calculations within the framework of the Pariser-Parr-Pople approximation. In particular, a small variation of the LUMO level and large destabilization of the HOMO level on ring expansion are rationalized from the extent of stretch of molecular orbitals: i.e., since the LUMOs are localized in the central TAP moiety irrespective of the molecular size, while the HOMOs have appreciable coefficients even over the fused aromatics, the HOMO level destabilizes while the LUMO level remains constant with increasing molecular size. In one CoTAP derivative, Co(III/II) and the first ligand oxidation couples occur experimentally at the same potential.     

Continuous selections avoiding extreme points

It is shown that if X is a countably paracompact collectionwise normal space, Y is a Banach space and φ:X→Y² is a lower semicontinuous mapping such that φ(x) is Y or a compact convex subset with Cardφ(x)>1 for each x∈X, then φ admits a continuous selection f:X→Y such that f(x) is not an extreme point of φ(x) for each x∈X. This is an affirmative answer to the problem posed by V. Gutev, H. Ohta and K. Yamazaki [V. Gutev, H. Ohta and K. Yamazaki, Selections and sandwich-like properties via semi-continuous Banach-valued functions, J. Math. Soc. Japan 55 (2003) 499-521].     

Characterization of certified reference material for quantification of polychlorinated biphenyls and organochlorine pesticides in fish

Fish certified reference material (CRM), NMIJ CRM 7404-a, for the analysis of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) was developed by the National Metrology Institute of Japan, part of the National Institute of Advanced Industrial Science and Technology. Fish samples (Japanese seabass) used for the preparation of the CRM were collected from Tokyo Bay, and the edible part was freeze-dried, pulverized, sieved, homogenized, and sterilized by γ-irradiation. This sample is in the form of a powder comprising approximately 10 g stored in a brown glass bottle. The certification was carried out using multiple analytical methods such as pressurized liquid extraction, Soxhlet extraction, saponification, and homogenization to ensure the reliability of analytical results; the certified values of target PCBs (PCB 28, PCB 70, PCB 105, PCB 153, and PCB 170) and OCPs (trans-nonachlor, dieldrin, p,p′-DDE, p,p′-DDT, and p,p′-DDD) were 1.05–14.0 μg kg⁻¹ and 1.57–18.0 μg kg⁻¹ for PCBs and OCPs, respectively. This is the first fish powder CRM in which PCBs and OCPs were determined by isotope dilution mass spectrometry.     

Facile one-pot preparation of thermally and photochemically convertible soluble precursors of copper phthalocyanine and naphthalocyanine

Soluble copper phthalocyanine (CuPc) and naphthalocyanine (CuNc) precursors which can be converted thermally and photochemically into insoluble CuPc and CuNc, respectively, have been synthesized by a one-step reaction using commercially available chemicals.     

High-pressure and high-temperature generation using diamond/sic composite anvils prepared with hot isostatic pressing

Using a hot isostatic pressing (HIP) technique, we synthesized diamond/SiC composites from diamond and Si powders. At an HIP condition of 1450 °C and 100 MPa, a pressure much lower than that of the diamond stability field, diamond powders react with molten Si to form well-sintered diamond/SiC composites. Cubes of the composites with 15 mm edge length were thereby fabricated, and an application to the second stage anvils in a Kawai-type high-pressure apparatus was attempted. A hybrid anvils system using four cubes of the composites and four of the conventional WC was introduced and heating experiments up to 1600 °C became possible. Because the diamond/SiC composites are transparent to X-rays, the present system is applicable not only to diffraction studies but also to radiographic studies that need a larger window for an X-ray image.