Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

Validation of a method for predicting the precision, limit of detection and range of quantitation in competitive ELISA.

The mathematical model for predicting the precision, limit of detection (LOD) and range of quantitation (ROQ) in a competitive enzyme-linked immunosorbent assay (ELISA) proposed by Hayashi et al. (Anal. Chem., 2004, 76, 1295) was validated. The model describes the relative standard deviation (RSD) of concentration estimates by the RSDs of pipetting volumes of analyte, enzyme-conjugated antigen, antibody and substrate solutions, and the standard deviation (SD) of inherent absorbances between the wells in an ELISA plate. For 6 kinds of direct competitive ELISA kits, the LOD and ROQ predicted by the model agreed well with those obtained by experiments with real samples. It was also confirmed that the model is applicable to the prediction of uncertainty that depends on the pipetting error of the viscous antiserum solution. The model was demonstrated to be useful for estimating the LOD and ROQ of competitive ELISA.     

Application of total reflection X-ray fluorescence spectrometry to small glass fragments.

Total reflection X-ray fluorescence spectrometry (TXRF) has been applied for trace elemental analysis of small glass fragments. A small glass sample (a fragment with weight less than 0.5 mg) was decomposed by 100 microg of HF/HNO3 acid; the material was condensed to 10 microl and was dried on a Si wafer. Since the size of the dried residue on the Si wafer was less than 1 cm in diameter, an incident X-ray beam with about 1 cm in width could effectively excite elemental components in such a small glass fragment. The precision of the present technique was checked by analyzing the glass fragments (<0.5 mg) from NIST SRM612; the relative standard deviations (RSD) of less than 8.1% were achieved for elemental ratios that were normalized by Sr. Fragments (<0.5 mg) obtained from 23 figured sheet glasses were used as samples for estimating the utility of this technique to forensic discrimination. Comparison of five elemental ratios of Ti/Sr, Mn/Sr, Zn/Sr, Rb/Sr, and Pb/Sr calculated from X-ray fluorescence spectra was effective in distinguishing glass fragments that could not be differentiated by their refractive indexes (RI).     

Phase transitions of lanthanide monophosphides with NaCl-type structure at high pressures

Lanthanide monophosphides LnP (Ln = La, Ce, Pr, Nd, Sm, Gd, Tb, Tm and Yb) with a NaCl-type structure have systematically been prepared at high temperatures. Using synchrotron radiation, X-ray diffractions of LnP have been studied up to 61 GPa at room temperature. The NaCl---CsCl transition for CeP is found at around 25 GPa. First-order phase transitions of LnP (Ln = La, Pr and Nd) with the crystallographic change occur at around 24, 26 and 30 GPa, respectively. The structure of the high pressure phases of these phosphides is a body center tetragonal structure (Ln: 0, 0, 0; P: 1/2, 1/2, 1/2; space group P4/mmm), which can be seen as the distorted CsCl-type structure. The Pr---P distance in the high pressure form of PrP is 2.789 Å. This almost agrees with the sum of covalent radii of Pr and P. The Pr---P bond has the covalent character at very high pressures. Similar results are also obtained for LaP and NdP. The pressure-induced phase transitions of SmP, GdP, TbP, TmP and YbP occur at around 35, 40, 38, 53 and 51 GPa, respectively. The structure of the high pressure phase is unknown. The phase transitions of LnP with many f-electrons are not due to the mechanism of the ordinary NaCl---CsCl transition. The transition pressures of LnP increase with decreasing the lattice constants in the NaCl-type structure, which decrease with increasing atomic number of the lanthanide atoms.     

Phosphorus in organic synthesis—VII : Diphenyl phosphorazidate (DPPA). A new convenient reagent for a modified curtius reaction

A simple one-step conversion of carboxylic acids to urethanes was achieved by diphenyl phosphorazidate (DPPA). The reaction procedure is quite simple, occurring by refluxing an equimolecular mixture of a carboxylic acid, DPPA, and triethylamine in the presence of a hydroxyl component. Aromatic, aliphatic, and heterocyclic carboxylic acids underwent rearrangements in satisfactory yields. As this modified Curtins reaction is much simpler and less laborious than the classical Curtius reaction and proceeds under mild conditions, it may have a broad synthetic utility.     

An improved procedure for the conversion of indolines into indoles

The addition of a sacrificial enamine (such as indole), or of a vinyl ether (like dihydropyran) to an indoline during dehydrogenation by phenylseleninic anhydride dramatically improves the yield of the corresponding indole. This is due to scavenging of Se¹¹ phenylselenenating species.     

Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost

The biodegradabilities of poly(?-caprolactone) (PCL) powders (av. size = 180.7 μm) in controlled compost at 58 °C have been studied using the microbial oxidative degradation analyzer (MODA) based on ISO 14855-2 entitled “Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test”. The biodegradability of the PCL powders was 101.4% in a 56-day test period by the ISO method. The biodegradabilities of PCL powders have been studied using percent modern carbon (pMC) measured by accelerated mass spectrometry (AMS). Trapped CO₂ was analyzed by AMS to determine the pMC (sample) using ¹⁴C radiocarbon concentration. By using the theory that the pMC (sample) was the sum of pMC (compost) (104.88%) and pMC (PCL) (0%) as the respective ratios in the determined period, CO₂ (respiration) was calculated only from one reaction vessel. The biodegradability of PCL powders was 79.9% in a 56-day test period by the AMS method. It was found that respiration activities in the sample vessel including PCL, compost and sea sand were the same as that in the blank vessel including compost and sea sand without PCL during the active biodegradation period (0-33 day) at 58 °C. It was confirmed that respiration activities in the sample vessel were slightly higher than that in the blank vessel after active biodegradation due to the propagation of microorganisms using energy and metabolites by PCL biodegradation during those periods.     

Radical cyclization in heterocycle synthesis. 11.(1) A novel synthesis of alpha,beta-disubstituted gamma-lactones via sulfanyl radical addition-cyclization using hydroximates as a tether

A combination of sulfanyl radical addition-cyclization of dienes connected with hydroximates and subsequent conversion of the resulting cyclic hydroximate to the lactones provides a novel method for the construction of alpha,beta-disubstituted gamma-lactones. Upon treatment with thiophenol in the presence of AIBN, dienes connected with hydroximates smoothly underwent sulfanyl radical addition-cyclization to give cyclic cis- and trans-hydroximates. Hydrolysis of cyclic hydroximates gave the desired cis- and trans-lactones in high yield. This method was successfully applied to the practical synthesis of (+/-)-oxo-parabenzlactone.