Amine‐cured epoxy/clay nanocomposites. II. The effect of the nanoclay aspect ratio

The thermophysical and mechanical properties of a nanocomposite material composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay are reported. The storage modulus at 100 °C, which was above the glass‐transition temperature (T_g), increased approximately 350% with the addition of 10 wt % (6.0 vol %) of clay. Below the T_g, the storage modulus at 30 °C increased 50% relative to the value of unfilled epoxy. It was determined that the T_g linearly increased as a function of clay volume percent. The tensile modulus of epoxy at room temperature increased approximately 50% with the addition of 10 wt % of clay. The reinforcing effect of the organoclay nanoplatelets is discussed with respect to the Tandon–Weng and Halpin–Tsai models. A pseudoinclusion model is proposed to describe the behavior of randomly oriented, uniformly dispersed platelets in nanocomposite materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4391–4400, 2004     

Umbelliferose Isolated from Cuminum cyminum L. Seeds Inhibits Antigen-Induced Degranulation in Rat Basophilic Leukemia RBL-2H3 Cells

Cuminum cyminum L. (cumin) is an annual plant of the Umbelliferae family native to Egypt. We previously showed that the aqueous extract of cumin seeds suppresses degranulation by downregulating the activation of antigen-induced intracellular signaling molecules in rat basophilic leukemia RBL-2H3 cells. However, the active substances in the extract have not yet been identified. Accordingly, herein, we aimed to ascertain the water-soluble substances present in cumin seeds that inhibit degranulation, which led to the identification of umbelliferose, a characteristic trisaccharide present in plants of the Umbelliferae family. Our study is the first to reveal the degranulation-suppressing activity of umbelliferose, and quantification studies suggest that cumin seed powder contains 1.6% umbelliferose. Raffinose, an isomer of umbelliferose, was also found to significantly suppress antigen-induced degranulation, but less so than umbelliferose. Both umbelliferose and raffinose contain sucrose subunits in their structures, with galactose moieties bound at different sites. These differences in structure suggest that the binding of galactose to the sucrose subunit at the α1-2 bond contributes to its strong degranulation-inhibiting properties.     

Mott transition from a spin liquid to a Fermi liquid in the spin-frustrated organic conductor kappa-(ET)2Cu2(CN)3

The pressure-temperature phase diagram of the organic Mott insulator kappa-(ET)2Cu2(CN)3, a model system of the spin liquid on triangular lattice, has been investigated by 1H NMR and resistivity measurements. The spin-liquid phase is persistent before the Mott transition to the metal or superconducting phase under pressure. At the Mott transition, the spin fluctuations are rapidly suppressed and the Fermi-liquid features are observed in the temperature dependence of the spin-lattice relaxation rate and resistivity. The characteristic curvature of the Mott boundary in the phase diagram highlights a crucial effect of the spin frustration on the Mott transition.     

Experimental demonstration of the induction synchrotron

We report an experimental demonstration of the induction synchrotron, the concept of which has been proposed as a future accelerator for the second generation of neutrino factory or hadron collider. The induction synchrotron supports a superbunch and a superbunch permits more charge to be accelerated while observing the constraints of the transverse space-charge limit. By using a newly developed induction acceleration system instead of radio-wave acceleration devices, a single proton bunch injected from the 500 MeV booster ring and captured by the barrier bucket created by the induction step voltages was accelerated to 6 GeV in the KEK proton synchrotron.     

Synthesis of Organosilyl-Functionalized Cage-Type Germanoxanes Containing Fluoride Ions

Eight corners of a double-four ring cage-type germanoxane, containing a fluoride ion, were successfully silylated by the combination of chlorosilanes and silazanes. Three different silyl groups, trimethylsilyl, dimethylsilyl, and dimethylvinylsilyl, were attached on the corners of germanoxane cage. The solubility and reactivity of the cage modified with dimethylvinylsilyl groups were significantly increased, allowing for further reaction. Hydrosilylation reaction between dimethylvinylsilylated cage geramanoxanes and dimethylsilylated cage siloxanes afforded porous solids. Functionalization of the corners of germanoxanes with silyl groups should provide valuable building blocks in various functional materials.     

Unprecedented alkylation of silicon enolates with alcohols via carbenium ion formations catalyzed by tin hydroxide-embedded montmorillonite

The solid acid, tin hydroxide-embedded montmorillonite, catalyzes the unprecedented alkylation of various silicon enolates with primary, secondary and tertiary benzylic alcohols as well as secondary allylic alcohols. The acid catalysis of Sn-Mont was not only higher than that of the other ion-exchanged montmorillonites (M-Mont; M = H, Ti, Fe and Al), but also higher than that of the typical homogeneous acid catalysts such as BF₃·OEt₂, TMSOTf and TfOH.     

Strategy-proofness, solidarity, and consistency for multiple assignment problems

We consider a problem of allocating indivisible objects when agents may desire to consume more than one object and no monetary transfers are allowed. We are interested in allocation rules that satisfy desirable properties from an economic and social point of view. In addition to strategy-proofness and Pareto efficiency, we consider consistency and two solidarity properties (replacement-domination and population-monotonicity). In most of the cases, these properties are satisfied only by serially dictatorial rules. Received: November 1999/Final version: December 2001     

Processing and characterization of epoxy/clay nanocomposites

Nanocomposite materials consisting of an epoxy matrix and silicate clay particles have been processed and characterized mechanically. The clay material used was a modified natural montmorillonite. The clay particles consisted of 1 nm thick layers with aspect ratios in the range of 100–1000. The clay particles were mixed with acetone and sonicated, then mixed with the polymer, deaerated and cured. The ultimate objective of processing was to produce a polymer/clay nanocomposite with separated (exfoliated) platelets, dispersed as uniformly as possible. Samples were prepared with clay concentrations of up to 10 wt%. The process used resulted in limited exfoliation but mostly intercalation, i.e., infusion of polymer between the silicate layers and increase of interlayer spacing. The characteristics of the nanocomposite were assessed by transmission electron microscopy and x-ray diffraction. Results from these observations show that the basal spacing of clay platelets increased from an initial pre-processing value of 1.85 nm to 4.5 nm. Enhancement of mechanical properties was measured by tensile testing of coupons. Stiffness increases of up to 50% over that of the unfilled epoxy were measured for clay concentrations of 5 wt%. Strength increases were also measured for low clay concentrations and low strain rate loading. Micromechanics modeling of mechanical behavior is discussed as a function of clay platelet dispersion.