Preparation of 3-substituted and 2,3-disubstituted-4,4,4-trifluoro-2-butenoic acids—Perkin condensation of activated aromatic ketones

The Perkin reaction of the activated aromatic ketones (2,2,2-trifluoroacetophenone and its 4′-phenyl-derivative) with various condensing agents (acetic anhydride, propionic anhydride, phenylacetic acid/acetic anhydride) gives the title compounds in good or moderate yields, and high E-stereoselectivity. For some derivatives an appreciable amount of the Z isomer was also formed. Several of the resulting butenoic acids and their methyl esters are synthesised and characterised for the first time.     

Study of fragmentation pattern and adsorption of 9-O-(triphenylsilyl)-10,11-dihydrocinchonidine on platinum by hydrogen/deuterium exchange using electrospray ionization ion-trap tandem mass spectrometry

We have studied the adsorption on a platinum (Pt) catalyst of two compounds utilizable as a chiral basic catalyst and a chiral modifier, dihydrocinchonidine (DHCD), and a new cinchona alkaloid derivative containing a bulky group, the Ph3SiO-DHCD molecule. The method of choice was the detection by electrospray ionization (ESI) ion-trap tandem mass spectrometry (MS/MS) of hydrogen/deuterium (H/D) exchange at room temperature, in tetrahydrofuran, at a D2 pressure of 1 bar. Based on the ESI-MS/MS spectrum of the new compound, we propose a mechanism for the formation of the silatropylium cation containing a Si-O bond. From the fragmentation pattern of Ph3SiO-DHCD it was confirmed that ESI-ion-trap MS/MS can be used to study the adsorption processes of complicated carbon compounds by investigating their H/D exchange reactions. In the case of Ph3SiO-DHCD, the results demonstrate that H/D exchange takes place mainly on the quinoline skeleton. However, the strong pi-bonded adsorption of the quinoline skeleton parallel with the imaginary plane of Pt is not preferred because the bulky Ph3Si group inhibits the multiple pi-bonded adsorption of the Ph3SiO-DHCD. Because of this hindrance the molecule was adsorbed tilted via the nonbonding electron pair of the N atom and C2' atom of the quinoline skeleton; consequently, mainly alkaloid-d1 and alkaloid-d2 are formed.     

Slow water diffusion in micellar solutions

Slowly diffusing water molecules were found by quasi-elastic neutron scattering (QENS) in a sodium dodecyl sulfate (SDS) micellar solution, and both their diffusion coefficient (4.33 x 10(-6) cm2 x s(-1)) and mole fraction (0.057) were determined. After successfully checking the mean slowing down of solvent molecules by the gradient compensated stimulated spin-echo (GCSTE) pulse sequence NMR method, a similar effect was observed with this technique in the solvent phase of dodecyl trimethylammonium bromide (DTAB) and differing chain length (X = 12, 20, 30, and 40) ethoxylated nonyl phenol (9NX) micellar systems. Following the literature, the experimental results are qualitatively explained by assuming that, apart from ionic hydration, H-bonds may form between the solvent molecules and the O or N atoms present in the hydrophilic (head)groups of the micelle-forming monomers.     

Sample preparation and isolation using planar chromatographic methods

The state of art of the various preparative planar liquid chromatographic (PLC) methods is summarized, especially for off-line and on-line sample application. The sample purification possibilities for PLC techniques are discussed. Purification and isolation strategies using forced-flow planar chromatographic techniques, such as overpressured layer chromatography and rotation planar chromatography, are suggested in the form of flow charts.     

Copper on iron promoted one-pot synthesis of β-aminoenones and 3,5-disubstituted pyrazoles

The reaction of hydroximoyl chlorides with acetylenes in the presence of a copper on iron bimetallic system leads to β-aminoenones via reductive ring opening of isoxazole intermediates. The valuable β-aminoenone building blocks can be isolated or transformed into pyrazoles with the addition of hydrazine in a straightforward one-pot procedure.     

Comparative study of recent wide-pore materials of different stationary phase morphology, applied for the reversed-phase analysis of recombinant monoclonal antibodies

Various recent wide-pore reversed-phase stationary phases were studied for the analysis of intact monoclonal antibodies (mAbs) of 150 kDa and their fragments possessing sizes between 25 and 50 kDa. Different types of column technology were evaluated, namely, a prototype silica-based inorganic monolith containing mesopores of ～250 Å and macropores of ～?1.1 μm, a column packed with 3.6 μm wide-pore core-shell particles possessing a wide pore size distribution with an average around 200 Å and a column packed with fully porous 1.7 μm particles having pore size of ～300 Å. The performance of these wide-pore materials was compared with that of a poly(styrene–divinyl benzene) organic monolithic column, with a macropore size of approximately 1 μm but without mesopores (stagnant pores). A systematic investigation was carried out using model IgG1 and IgG2 mAbs, namely rituximab, panitumumab, and bevacizumab. Firstly, the recoveries of intact and reduced mAbs were compared on the two monolithic phases, and it appeared that adsorption was less pronounced on the organic monolith, probably due to the difference in chemistry (C18 versus phenyl) and the absence of mesopores (stagnant zones). Secondly, the kinetic performance was investigated in gradient elution mode for all columns. For this purpose, peak capacities per meter as well as peak capacities per time unit and per pressure unit (PPT) were calculated at various flow rates, to compare performance of columns with different dimensions. In terms of peak capacity per meter, the core-shell 3.6 μm and fully porous 1.7 μm columns outperformed the two monolithic phases, at a temperature of 60 °C. However, when considering the PPT values, the core-shell 3.6 μm column remained the best phase while the prototype silica-based monoliths became very interesting, mostly due to a very high permeability compared with the organic monolith. Therefore, these core-shell and silica-based monolith provided the fastest achievable separation. Finally, at the maximal working temperature of each column, the core-shell 3.6 μm column was far better than the other one, because it is the only one stable up to 90 °C. Lastly, the loading capacity was also measured on these four different phases. It appeared that the organic monolith was the less interesting and rapidly overloaded, due to the absence of mesopores. On the other hand, the loading capacity of prototype silica-based monolith was indeed reasonable.     

Separation of dansylated 17β-estradiol, 17α-estradiol, and estrone on a single HPLC column for simultaneous quantitation by LC–MS/MS

We show here that baseline separation of dansylated estrone, 17β-estradiol, and 17α-estradiol can be done, contrary to previous reports, within a short run time on a single RP-LC analytical column packed with particles bonded with phenyl-hexyl stationary phase. The chromatographic method coupled with isotope dilution tandem MS offers a simple assay enabling the simultaneous analysis of these analytes. The method employs ¹³C-labeled estrogens as internal standards to eliminate potential matrix effects arising from the use of deuterated estrogens. The assay also offers adequate accuracy and sensitivity to be useful for biological samples. The practical applicability of the validated method is demonstrated by the quantitative analyses of in vivo samples obtained from rats treated with Premarin®.

Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

Equilibrium and structural characterization of ofloxacin–cyclodextrin complexation

The enantiomer-specific characterization of ofloxacin–cyclodextrin complexes was carried out by a set of complementary analytical techniques. The apparent stability constants of the ofloxacin enantiomers with 20 different cyclodextrins at two different pH values were determined to achieve good resolution capillary electrophoresis enantioseparation either to establish enantioselective drug analysis assay, or to interpret and design improved host–guest interactions at the molecular level. The cyclodextrins studied differed in the nature of substituents, degree of substitution (DS), charge and purity, allowing a systematic test of these properties on the complexation. The seven-membered beta-cyclodextrin and its derivatives were found to be the most suitable hosts. Highest stability and best enantioseparation were observed for the carboxymethylated-beta-cyclodextrin (DS ~ 3.5). The effect of substitution pattern (SP) was investigated by molecular modeling, verifying that SP greatly affects the complex stability. Induced circular dichroism was observed and found especially significant on carboxymethylated-beta-cyclodextrin. The complex stoichiometry and the geometry of the inclusion complexes were determined by ¹H NMR spectroscopy, including 2D ROESY techniques. Irrespective of the kind of cyclodextrin, the complexation ratio was found to be 1:1. The alfa-cyclodextrin cavity can accommodate the oxazine ring only, whereas the whole tricyclic moiety can enter the beta- and gamma-cyclodextrin cavities. These equilibrium and structural information offer molecular basis for improved drug formulation.