Complex backflow dynamics in nematic liquid crystals

Received December 31, 2001 / Published online May 21, 2002     

Quantification problems in depth profiling of pwr steels using Ar+ ion sputtering and XPS analysis.

The oxide scales of AISI 304 formed in boric acid solutions at 300 degrees C and pH = 4.5 have been studied using X-ray photoelectron spectroscopy (XPS) depth profiling. The present focus is depth profile quantification both in depth and chemical composition on a molecular level. The roughness of the samples is studied by atomic force microscopy before and after sputtering, and the erosion rate is determined by measuring the crater depth with a surface profilometer and vertical scanning interferometry. The resulting roughness (20-30 nm), being an order of magnitude lower than the crater depth (0.2-0.5 microm), allows layer-by-layer profiling, although the ion-induced effects result in an uncertainty of the depth calibration of a factor of 2. The XPS spectrum deconvolution and data evaluation applying target factor analysis allows chemical speciation on a molecular level. The elemental distribution as a function of the sputtering time is obtained, and the formation of two layers is observed-one hydroxide (mainly iron-nickel based) on top and a second one deeper, mainly consisting of iron-chromium oxides.     

Spreading Code Design Using a Global Optimization Method

The performance of a code division multiple access system depends on the correlation properties of the employed spreading code. Low cross-correlation values between spreading sequences are desired to suppress multiple access interference and to improve bit error performance. An auto-correlation function with a distinct peak enables proper synchronization and suppresses intersymbol interference. However, these requirements contradict each other and a trade-off needs to be established. In this paper, a global two dimensional optimization method is proposed to minimize the out-of-phase average mean-square aperiodic auto-correlation with average mean-square aperiodic cross-correlation being allowed to lie within a fixed region. This approach is applied to design sets of complex spreading sequences. A design example is presented to illustrate the relation between various correlation characteristics. The correlations of the obtained sets are compared with correlations of other known sequences.     

GnRH binding RNA and DNA Spiegelmers: a novel approach toward GnRH antagonism

Mirror-image oligonucleotide ligands (Spiegelmers) that bind to the pharmacologically relevant target gonadotropin-releasing hormone I (GnRH) with high affinity and high specificity have been identified using the Spiegelmer technology. GnRH is a decapeptide that plays an important role in mammalian reproduction and sexual maturation and is associated with several benign and malignant diseases. First, aptamers that bind to D-GnRH with dissociation constants of 50-100 nM were isolated out of RNA and DNA libraries. The respective enantiomers of the DNA and RNA aptamers were synthesized, and their binding to L-GnRH was shown. These Spiegelmers bind to L-GnRH with similar affinity to that of the corresponding aptamers that bind to D-GnRH. We further demonstrated dose-dependent inhibition of GnRH-induced Ca(2+) release in Chinese hamster ovary cells that were stably transfected with the human GnRH receptor.     

Bi- and trinuclear oxalamidinate complexes of palladium as catalysts in the copper-free Sonogashira reaction and in the Negishi reaction

The binuclear complex [(acac)Pd(oxam)Pd(acac)] 1 (oxam: tetraphenyl oxalic amidinate) has been prepared from H₂oxam and Pd(acac)₂ in excellent yield. The complex was characterized by elemental analyses, mass spectroscopy, ¹H NMR, ¹³C NMR spectroscopy and in the solid state by X-ray single crystal diffraction analyses. 1 consists of a bimetallic centrosymmetric unit in which the planar oxam ligand acts in a bis-chelating fashion. Each palladium center is in a planar environment.The complex 1 acts as highly selective pre-catalyst in the copper-free Sonogashira reaction between 4-bromoacetophenone and phenylacetylene. Its long-time catalytic activity is higher than that of the related binuclear complex 2 (oxam: tetra-p-tolyl oxalic amidinate) or that of the trinuclear compound [(acac)Pd(oxam)Zn(oxam)Pd(acac)] (3), the solid-state structure of which was also determined by an X-ray structural analysis of single crystals. In addition, 2 is an active and extremely selective pre-catalyst for the Negishi reaction between 3,5,6,8-tetrabromophenanthroline and R-CC-ZnCl (R: Ph, (ⁱprop)₃Si) to form tetra-alkyne-substituted derivatives.     

Phase stability in the systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba): electron concentration and size controlled variations on the laves phase structural theme

The systems AeAl(2-x)Mgx (Ae = Ca, Sr, Ba) display electron concentration induced Laves phase structural changes. However, the complete sequence MgCu2 --> MgNi2 --> MgZn2 with increasing x (decreasing electron count) is only observed for Ae = Ca. Compounds SrAl(2-x)Mgx (0 < x < or = 2) and BaAl(2-x)Mgx (x = 0.85 and 2.0) were synthesized and structurally characterized by X-ray diffraction experiments. For the Sr system the structural sequence CeCu2 --> MgNi2 --> MgZn2 occurs with increasing Mg content x. Thus, larger Sr does not allow the realization of the MgCu2 structure at low x. For Ae = Ba a binary compound BaAl2 does not exist, but more Ba-rich Ba7Al13 forms. The reinvestigation of the crystal structure of Ba7Al13 by selected area and convergent beam electron diffraction in a transmission electron microscope revealed a superstructure, which subsequently could be refined from single X-ray diffraction data. The formula unit of the superstructure is Ba21Al40 (space group P31m, Z = 1, a = 10.568(1) angstroms, c = 17.205(6) angstroms). In Ba21Al40 a size match problem between Ba and Al present in Ba7Al13 is resolved. The structure of Ba7Al13 (Ba21Al40) can be considered as a Ba excess variant of the hexagonal MgNi2 Laves phase type structure. An incommensurately modulated variant of the MgNi2 structure is obtained for phases BaAl(2-x)Mgx with x = 0.8-1. At even higher Mg concentrations a structural change to the proper MgZn2 type structure takes place.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.     

The use of bis(diphenylphosphino)amines with N-aryl functionalities in selective ethylene tri- and tetramerisation

A systematic study was conducted on the Cr catalysed tri- and tetramerisation of ethylene using bis(diphenylphosphino)amine ligands with N-aryl functionality. This study revealed that the oligomerisation reaction product selectivity is primarily dependent on the structure and size of the N-aryl groups.

Addition of sufficient steric bulk to the N-phenyl group via ortho-alkyl substitution increased the combined 1-hexene and 1-octene selectivity (overall alpha selectivity) to above 82% at an overall 1-octene selectivity of 56%. The introduction of a single carbon spacer between the N-atom and the aryl-moiety, as well as the addition of branching on this carbon, resulted in further selectivity improvements, achieving an overall 1-octene selectivity of 64% and an overall alpha selectivity of 84%. This was obtained at catalyst productivities in excess of 1,000,000 g/g Cr/h.     

Characterization of a putative sensory [FeFe]-hydrogenase provides new insight into the role of the active site architecture

[FeFe]-hydrogenases are known for their high rates of hydrogen turnover, and are intensively studied in the context of biotechnological applications. Evolution has generated a plethora of different subclasses with widely different characteristics. The M2e subclass is phylogenetically distinct from previously characterized members of this enzyme family and its biological role is unknown. It features significant differences in domain- and active site architecture, and is most closely related to the putative sensory [FeFe]-hydrogenases. Here we report the first comprehensive biochemical and spectroscopical characterization of an M2e enzyme, derived from Thermoanaerobacter mathranii. As compared to other [FeFe]-hydrogenases characterized to-date, this enzyme displays an increased H₂ affinity, higher activation enthalpies for H⁺/H₂ interconversion, and unusual reactivity towards known hydrogenase inhibitors. These properties are related to differences in active site architecture between the M2e [FeFe]-hydrogenase and “prototypical” [FeFe]-hydrogenases. Thus, this study provides new insight into the role of this subclass in hydrogen metabolism and the influence of the active site pocket on the chemistry of the H-cluster.

Characterization of a group D putative sensory [FeFe]-hydrogenase reveals how the active site can be tuned to decrease CO inhibition and increase stability of a reduced H-cluster while retaining the ability to catalyze H⁺/H₂ interconversion.