Experimental studies of the dynamics of the bond-forming reactions of CF2(2+) with H2O using position-sensitive coincidence spectroscopy

The dynamics of the product channels forming OCF(+)+H(+)+HF and HCF(2) (+)+H(+)+O following the collisions of CF(2) (2+) with H(2)O have been investigated with a new position-sensitive coincidence experiment at a center-of-mass collision energy of 5.6 eV. The results show the formation of OCF(+) occurs via the formation of a doubly charged collision complex [H(2)O-CF(2)](2+) which subsequently undergoes a charge separating dissociation to form H(+) and HOCF(2) (+). The HOCF(2) (+) monocation subsequently fragments to form HF+OCF(+). The lifetimes of the collision complex and the HOCF(2) (+) ion are at least of the order of their rotational period. The kinetic energy release in this reaction indicates that it involves the ground state of CF(2) (2+) and forms the ground electronic states of OCF(+) and HF. The mechanism for forming HCF(2) (+) involves the direct and rapid abstraction of a hydride ion from H(2)O by CF(2) (2+). The resulting OH(+) ion subsequently fragments to H(+)+O, on a time scale at least comparable with its rotational period.     

A Carbocationic Triarylmethane-Based Porous Covalent Organic Network

A thermally stable carbocationic covalent organic network (CON), named RIO-70 was prepared from pararosaniline hydrochloride, an inexpensive dye, and triformylphloroglucinol in solvothermal conditions. This nanoporous organic material has shown a specific surface area of 990 m² g⁻¹ and pore size of 10.3 Å. The material has CO₂ uptake of 2.14 mmol g⁻¹ (0.5 bar), 2.7 mmol g⁻¹ (1 bar), and 6.8 mmol g⁻¹ (20 bar), the latter corresponding to 3 CO₂ molecules adsorbed per pore per sheet. It is shown to be a semiconductor, with electrical conductivity (σ) of 3.17×10⁻⁷ S cm⁻¹, which increases to 5.26×10⁻⁴ S cm⁻¹ upon exposure to I₂ vapor. DFT calculations using periodic conditions support the findings.     

Effect of stearic acid treatment on the properties of aligned short hemp fibre mats and their potential use as reinforcement in polypropylene matrix composites

The main objective of this study was to assess the effect of stearic acid vapour treatment on hemp fibre mats produced using dynamic sheet forming, and the potential use of these treated mats as reinforcement in polypropylene matrix composites. Stearic acid was successfully applied through vapour treatment, appearing to form a layer on fibre surfaces. It was found that the presence of stearic acid increased hydrophobicity and thermal stability of fibre mats. It was also found to increase thermal stability of polypropylene matrix composites as well as their strength.

     

Structure elucidation of highly polar basic degradants by on-line hydrogen/deuterium exchange hydrophilic interaction chromatography coupled to tandem mass spectrometry

A hydrophilic interaction liquid chromatography (HILIC) method was used to separate a commonly used pharmaceutical starting material, 4-aminomethylpyridine (4-AMP), and its degradants. The structures of the major degradants were characterized and elucidated without prior isolation by accurate mass measurement, MS/MS analysis and on-line hydrogen/deuterium (H/D) exchange experiments. The mass spectra obtained from H/D exchange experiments are particularly useful to differentiate structural isomers, to elucidate the fragmentation pathways, and to aid in structure elucidation in the absence of MS/MS fragmentation information. The impact of deuterium oxide and temperature on HILIC separation has also been explored here. The integration of H/D exchange with HILIC has been described here for the first time and has been demonstrated to be a powerful structure elucidation tool via the study of degradants in 4-AMP.     

Competition through capacity investment under asymmetric existing capacities and costs

This paper discusses the way that different operational characteristics including existing capacity, scale economies, and production policy have an important influence on the capacity outcomes when firms compete in the market place. We formulate a game-theoretical model where each firm has an existing capacity and faces both fixed and variable costs in purchasing additional capacity. Specifically, the firms simultaneously (or sequentially) make their expansion decisions, and then simultaneously decide their production decisions with these outputs being capacity constrained. We also compare our results with cases where production has to match capacity. By characterizing the firms’ capacity and production choices in equilibrium, our analysis shows that the operational factors play a crucial role in determining what happens. The modeling and analysis in the paper gives insight into the way that the ability to use less production capacity than has been built will undermine the commitment value of existing capacity. If a commitment to full production is not possible, sinking operational costs can enable a firm to keep some preemptive advantage. We also show that the existence of fixed costs can introduce cases where there are either no pure strategy equilibrium or multiple equilibria. The managerial implications of our analysis are noted in the discussion. Our central contribution in this paper is the innovative integration of the strategic analysis of capacity expansion and well-known (s,S)$(s\text{,}S)$ policy in operations and supply chain theory.     

High-index contrast grating based broadband out-coupler on SOI

An efficient broadband out-coupler on silicon-on-insulator (SOI) with high-index contrast grating (HCG) is proposed. The presence of a silicon-air (high-index contrast) grating on the top silicon layer in SOI allows a strong interaction between the guided mode and the grating. The broadband design of the out-coupler is presented by optimising the various grating parameters. The design analysis and simulation of such an out-coupler is performed with finite difference method. Coupling efficiency of 54% is achieved over an ultra-wide wavelength range from 1500 nm to 1650 nm.     

An alternative technique for solving a coupled PDE system in interphase heat transfer

Recently an accelerated iterative procedure was studied for solving a coupled partial differential equation system in interphase heat transfer to improve some existing iterative procedures in the literature. In that procedure, at each step of the iteration one has to evaluate the derivative of a well-known function at a new point. In this paper, an alternative approach is proposed in which one has to evaluate the derivative only once throughout the procedure. The proposed new iterative scheme also has the same order of convergence and takes lesser number of iterations for certain benchmark problems. An interesting theoretical study on the monotone convergence as well as error estimate of the proposed iterative procedure are provided for continuous as well as discretized problems. The proposed iterative procedure also supplements the existence and uniqueness of the solution in both the cases. A comparative numerical study is also done to demonstrate the efficacy of the proposed scheme.     

Spectroscopic labeling of A, S/T in the 1H-15N HSQC spectrum of uniformly (15N-13C) labeled proteins

A new triple resonance two-dimensional experiment, termed (HC)NH, has been described to generate specific labels on the peaks of alanines and serines/threonines, separately, in the ¹H–¹⁵N HSQC spectrum of a protein. The performance of the pulse sequence has been demonstrated with a 151 residue protein. The method permits the investigation of local environments around those specific residues without actually having to obtain complete resonance assignments for the entire protein. With this one can envisage use of the technique for studying large protein systems from different points of view.     

Exercising spatiotemporal control of cell attachment with optically transparent microelectrodes

This paper describes a novel approach of controlling cell-surface interactions through an electrochemical "switching" of biointerfacial properties of optically transparent microelectrodes. The indium tin oxide (ITO) microelectrodes, fabricated on glass substrates, were modified with poly(ethylene glycol) (PEG) silane to make glass and ITO regions resistant to protein and cell adhesion. Cyclic voltammetry, with potassium ferricyanide serving as a redox reporter molecule, was used to monitor electron transfer across the electrolyte-ITO interface. PEG silane modification of ITO correlated with diminished electron transfer, judged by the disappearance of ferricyanide redox activity. Importantly, application of reductive potential (-1.4 V vs Ag/AgCl reference) corresponded with reappearance of typical ferricyanide redox peaks, thus pointing to desorption of an insulating PEG silane layer. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) characterization of the silanized ITO surfaces after electrical stimulation indicated complete removal of the silane layer. Significantly, electrical stimulation allowed to "switch" chosen electrodes from nonfouling to protein-adhesive while leaving other ITO and glass regions protected by a nonfouling PEG silane layer. The spatial and temporal control of biointerfacial properties afforded by our approach was utilized to micropattern proteins and cells and to construct micropatterned co-cultures. In the future, control of the biointerfacial properties afforded by this novel approach may allow the organization of multiple cell types into precise geometric configurations in order to create better in vitro mimics of cellular complexity of the native tissues.     

Use of photolithography to encode cell adhesive domains into protein microarrays

Protein microarrays are rapidly emerging as valuable tools in creating combinatorial cell culture systems where inducers of cellular differentiation can be identified in a rapid and multiplexed fashion. In the present study, protein microarraying was combined with photoresist lithography to enable printing of extracellular matrix (ECM) protein arrays while precisely controlling "on-the-spot" cell-cell interactions. In this surface engineering approach, the micropatterned photoresist layer formed on a glass substrate served as a temporary stencil during the microarray printing, defining the micrometer-scale dimensions and the geometry of the cell-adhesion domains within the printed protein spots. After removal of the photoresist, the glass substrates contained micrometer-scale cell-adhesive regions that were encoded within 300 or 500 microm diameter protein domains. Fluorescence microscopy and atomic force microscopy (AFM) were employed to characterize protein micropatterns. When incubated with micropatterned surfaces, hepatic (HepG2) cells attached on 300 or 500 mum diameter protein spots; however, the extent of cell-cell contacts within each spot varied in accordance with dimensions of the photoresist stencil, from single cells attaching on 30 microm diameter features to multicell clusters residing on 100 or 200 microm diameter regions. Importantly, the photoresist removal process was shown to have no detrimental effects on the ability of several ECM proteins (collagens I, II, and IV and laminin) to support functional hepatic cultures. The micropatterning approach described here allows for a small cell population seeded onto a single cell culture substrate to be exposed to multiple scenarios of cell-cell and cell-surface interactions in parallel. This technology will be particularly useful for high-throughput screening of biological stimuli required for tissue specification of stem cells or for maintenance of differentiated phenotype in scarce primary cells.