Assessment of the Formant Frequencies in Normal and Laryngectomized Individuals Using Linear Predictive Coding

The objective of this study was to assess the difference in voice quality as defined by acoustical analysis using sustained vowel in laryngectomized patients in comparison with normal volunteers. This was designed as a retrospective single center cohort study. An adult tertiary referral unit formed the setting of this study. Fifty patients (40 males) who underwent total laryngectomy and 31 normal volunteers (18 male) participated. Group comparisons with the first three formant frequencies (F1, F2, and F3) using linear predictive coding (LPC) (Laryngograph Ltd, London, UK) was performed. The existence of any significant difference of F1, F2, and F3 between the two groups using the sustained vowel /i/ and the effects of other factors namely, tumor stage (T), chemoradiotherapy, pharyngectomy, cricothyroid myotomy, closure of pharyngoesophageal segment, and postoperative complication were analyzed. Formant frequencies F1, F2, and F3 were significantly different in male laryngectomees compared to controls: F1 (P<0.001, Mann-Whitney U test), F2 (P<0.001, Student's t test), and F3 (P=0.008, Student's t test). There was no significant difference between females in both groups for all three formant frequencies. Chemoradiotherapy and postoperative complications (pharyngocutaneous fistula) caused a significantly lower formant F1 in men, but showed little effect in F2 and F3. Laryngectomized males produced significantly higher formant frequencies, F1, F2, and F3, compared to normal volunteers, and this is consistent with literature. Chemoradiotherapy and postoperative complications significantly influenced the formant scores in the laryngectomee population. This study shows that robust and reliable data could be obtained using electroglottography and LPC in normal volunteers and laryngectomees using a sustained vowel.     

Platinum carbonyl derived catalysts on inorganic and organic supports: a comparative study

Fumed silica, silica gel, silica-alumina and cross-linked (5.5%) polystyrene have been functionalized with quaternary ammonium groups and the Chini cluster [Pt₁₂(CO)₂₄]²⁻ has been anchored onto these functionalized materials by ion pairing. A catalyst has also been prepared by the adsorption of Na₂[Pt₁₂(CO)₂₄] on unfunctionalized fumed silica. The catalytic activities of the resultant materials, and that of commercially purchased 5% platinum on alumina have been studied for the hydrogenation of a variety of unsaturated compounds. The substrates studied are: α-acetamidocinnamic acid, cyclohexanone, acetophenone, methyl pyruvate, ethyl acetoacetate, nitrobenzene and benzonitrile. Compared to the polystyrene supported catalyst, the inorganic oxide supported catalysts have higher surface areas and for most of the substrates have notably higher activities. The functionalized fumed silica-based catalyst gives higher conversions than functionalized silica gel and silica-alumina-based catalysts. In the hydrogenation of acetophenone and ethyl acetoacetate, the functionalized fumed silica-based catalyst show superior activity compared to the commercial platinum catalyst, and the catalyst made by conventional adsorption method. In benzonitrile hydrogenation with all the cluster-derived catalysts a hydrazine derivative is selectively formed, but when the commercial platinum catalyst is used benzyl amine is the main product.     

Differential thermal and thermogravimetric analyses of bound water content in cellulosic substrates and its significance during cellulose hydrolysis by alkaline active fungal cellulases

Various cellulosic substrates were examined for bound water content by differential thermal analysis (DTA) and thermogravimetry (TG). Samples were heated in the range of 30-100 degrees C at a rate of 3 degrees C/min. DTA vaporization curves for different cellulose samples indicated that the bound water (Wf) was vaporized at higher temperature than free water (Wf) at the surface. Weight loss was observed in two stages, corresponding to Wf and Wb in TG curves. The bound water content was dependent on the degree of crystallinity of cellulose. Among different cellulosic substrates, Walseth cellulose showed the highest bound water content, and it also was found to be the least crystalline. The alkaline-active, alkali-stable cellulase was obtained from the alkalotolerant Fusarium sp. The substrate specificity and viscometric characteristics confirmed the enzyme to be an endoglucanase. The Wb content of Walseth cellulose was lowered during the enzymatic hydrolysis. The possible application of bound water analysis in understanding the hydrolysis of cellulosic substrates of different crystallinity is discussed.     

Nickel nitrosyl complexes with the diphenylphosphinoethane ligand

Summary Four-coordinate nickel nitrosyl complexes of the general formula Ni(NO)X(Dppe) (Dppe=Ph₂PCH₂CH₂PPh₂) have been prepared byin situ formation of Ni(NO₂)X(Dppe), (X= Cl, Br, I or SCN) followed by reduction with triphenylphosphine, or carbon monoxide, and/or DMF. Oxygenation of the nitrosyl complexes gives the corresponding nitro products and as indicated by u.v.-vis spectroscopy involves formation of an intermediate. The oxygenation rate increases markedly in the presence of light or of a catalytic amount of benzoyl peroxide and a tentative explanation is offered for these observations. Ionic adducts are formed in reactions between the nitrosyl complexes and donor molecules.Paper presented in part at the XXth ICCC Conference.     

Translucent nanolatexes through emulsion polymerisation of ethyl acrylate

Turbid emulsion systems of ethylacrylate/sodium dodecyl sulphate/water with monomer to surfactant (M/S) ratios 10 and 40 were transformed into stable transparent/translucent nanolatexes through emulsion polymerisation using potassium persulphate as an initiator. The latex particle size was observed to be similar to that obtained by true microemulsion polymerisation where M/S ratio is one. The kinetic plots exhibited two intervals upto M/S ratios 10. AIBN initiated systems showed separation of two phases for the M/S ratio ?10. M/S ratios were varied from 1 to 54 for the comparative study of polymerisation in emulsion and microemulsion media. Gel effect dominance was observed around 40-60% conversion for the microemulsion polymerisation of ethylacrylate. Only one chain per particle was observed for microemulsion system with M/S ratio 1 and three to four chains per particle were observed for the systems with M/S ratios 10 and 40. Unlike M/S=1 system, higher dependency of polymerisation rate on initiator concentration was observed for the systems with M/S=10 and 40. A possible mechanism for such a transformation has been proposed.     

A water soluble nanostructured platinum (0) metal catalyst from platinum carbonyl molecular clusters: Synthesis, characterization and application in the selective hydrogenations of olefins, ketones and aldehydes

High nuclearity platinum carbonyl cluster anions (Chini's clusters) have been used as precursors to prepare a platinum nanocatalyst. The ionic polyelectrolyte poly(diallyldimethylammonium chloride) has been used as the support material for anchoring [Pt₃₀(CO)₆₀]²⁻ via ion-pairing and subsequent stabilization of the nanoparticles. The polymer-supported material has been studied by spectroscopy (NIR, ¹³C NMR, and IR) and TEM before and after its use as a water soluble hydrogenation catalyst. The nanocatalyst is found to be effective for the chemoselective hydrogenation of olefinic, aldehydic and ketonic double bonds. For most of the substrates isolation of the product and reuse of the catalyst are extremely easy due to the automatic phase separation of the products from the catalyst. The spectral features of the fresh catalyst show retention of the carbonyl ligands and molecular identity of the parent cluster, but after use the carbonyl ligands appear to be lost. TEM of the supported material before and after use as a catalyst shows the presence of platinum nanoparticles with majority (≥70%) of the particles in the range of 2–6 nm. Smaller particles are dominant in the used catalyst and this observation is rationalized on the basis of the known reactivity of Chini's clusters with dihydrogen.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

Catalytic asymmetric synthesis of β-triazolyl amino alcohols by asymmetric transfer hydrogenation of α-triazolyl amino alkanones

The synthesis of optically active β-triazolyl amino alcohols was carried out via ruthenium catalyzed asymmetric transfer hydrogenation of α-triazolyl amino alkanones. This reaction proceeds under mild reaction conditions with up to 99% yield and 99.9% enantiomeric excess (ee). This protocol was applied to the synthesis of an enantiopure antitubercular agent and its arylated product with retention in enantiomeric purity. The absolute configuration at the stereogenic center of the chiral product as found to be (S).     

Electron spin resonance in pyrolyzed lignin

An investigation has been made into electron spin resonance (ESR) occurring in the ranges of carbons prepared from periodate lignin by vacuum pyrolysis. Line shape, line width, g-factors, saturation effects, and free spin concentration have been measured and the effect of oxygen on these parameters has been examined. A g-shift and lines with inhomogeneous broadening have been observed. In the presence of oxygen the lower-temperature carbons showed an unexpected increase in the detectable free spin concentration. The discussion includes factors affecting the nature of the free spins in the pyrolyzed material.