Approximations of open quotient and speed quotient from glottal airflow and egg waveforms : Effects of measurement criteria and sound pressure level

Noninvasive measures of vocal fold activity are useful for describingnormal and disordered voice production. Measures of open and speed quotient from glottal airflow and electroglottographic (EGG) waveforms have been used to describe timing events associated with vocal fold vibration. To date, there has been little consistency in the measurement criteria used to calculate quotient values. In this study, criteria of 20% and 50% were applied to the AC amplitude of glottal airflow and inverted EGG waveforms for measurement of open quotient. Criteria of 20%, 50%, and 80%, and a midslope criterion that segmented the waveform between 20% and 80% of the waveform amplitude, were used for the calculation of speed quotient. Subjects produced waveforms at sound pressure levels (SPL) of 70, 75, 80 and 85 dB. Results indicated that approximations of open quotient obtained from the glottal airflow waveform significantly decreased using both the 20% and 50% criteria as SPL increased from 80 to 85 dB. No significant changes were found in open quotient from the EGG waveform as a function of SPL. Results of speed quotient measures from the glottal airflow and EGG waveforms showed a generally increasing trend as SPL increased, although the differences were not statistically significant. The data suggest that the signal type, measurement criterion and SPL must be considered in interpreting quotient measures.     

Synthesis and characterization of doped apatite-type lanthanum silicates for SOFC applications

A series of iron- and/or aluminium-doped apatite-type lanthanum silicates (ATLS) La_9.83Si_{6 ‐ x ‐ y}Al_xFe_yO_26 ± δ (x = 0, 0.25, 0.75, and 1.5, y = 0, 0.25, 0.75, and 1.5) were synthesized using the mechanochemical activation (MA), solid state reaction (SSR), Pechini (Pe) and sol-gel (SG) methods. The total conductivity of the prepared materials was measured under air in the temperature range 600-850 °C using 4-probe AC impedance spectroscopy. Its dependence on composition, synthesis method, sintering conditions and powder particle size was investigated. It was found that for electrolytes of the same composition, those prepared via mechanochemical activation exhibited the highest total specific conductivity, which was improved with increasing Al- and decreasing Fe-content. The highest conductivity value at 700 °C, equal to 2.04 × 10^− 2 S cm^− 1, was observed for the La_9.83Si₅Al_0.75Fe_0.25O_26 ± δ electrolyte. La_9.83Si_4.5Fe_1.5O_26 ± δ electrolyte samples synthesized using the Pechini method exhibited higher conductivity when sintered conventionally than when spark-plasma sintering (SPS) was used.     

Propagation characteristics of nonlinear optical fibers with complex refractive index. A transmission line model approach

The transmission line model has been modified in order to evaluate nonlinear waves guided by optical fibers with complex refractive index. It is proven that the proposed model is able to tackle fibers with losses or gain, under the presence of arbitrary nonlinearity. The method is applied for the calculation of weakly guided lossy nonlinear optical fibers considering various configurations and Kerr nonlinearity. Power depended propagation characteristics have been calculated and plotted for the fundamental mode and the potential use of the method in optical fiber amplifiers with index nonlinearity is also discussed.     

Optimum conditions for the water extraction of L-theanine from green tea

Theanine is a unique non-protein amino acid found in tea (Camellia sinensis). It contributes to the favourable umami taste of tea and is linked to various beneficial effects in humans. There is an increasing interest in theanine as an important component of tea, as an ingredient for novel functional foods and as a dietary supplement. Therefore, optimal conditions for extracting theanine from tea are required for the accurate quantification of theanine in tea and as an efficient first step for its purification. This study examined the effects of four different extraction conditions on the yield of theanine from green tea using water and applied response surface methodology to further optimise the extraction conditions. The results showed that temperature, extraction time, ratio of water-to-tea and tea particle sizes had significant impacts on the extraction yield of theanine. The optimal conditions for extracting theanine from green tea using water were found to be extraction at 80 °C for 30 min with a water-to-tea ratio of 20:1 mL/g and a tea particle size of 0.5-1 mm.     

Samarium Based High Surface Area Perovskite Type Oxides SmFe1-XAlXO3 (X=0.00, 0.50, 0.95). Part II, Catalytic Combustion of CH4

The catalytic combustion of methane with stoichiometric amounts of oxygen to CO₂ and H₂O has been studied over samarium based high surface area perovskite type oxides SmFe_1-xAl_xO₃ (x=0.00, 0.50 0.95) prepared via a new sol-gel method. A comparison to other lanthanum perovskites prepared by the ceramic method shows higher catalytic activity for SmFeO₃ and SmFe_0.5Al_0.5O₃ samples.     

Speech breathing during reading in women withvocal nodules

This study examined speech breathing patterns during reading bywomen with bilateral vocal fold nodules judged as mildly dysphonic and by women without vocal nodules. Although it might be predictable that the speech breathing patterns of individuals with laryngeal dysfunction will differ from those without laryngeal dysfunction, there is a lack of empirical data to support such assumptions.The results of the current study indicated that glottal airflow was greaterduring reading for the women with vocal nodules and that a larger volume of air was expended both per syllable and per breath group during reading. The rate of speech did not significantly differ between the two groups of women. There was no significant difference for the average duration of the breath groups and no significant difference for the number of syllables spoken per breath group. Additionally, both groups of women demonstrated a similar pattern of inspiratory pause location during the reading. The results suggest that speech breathing patterns associated with dysphonia be examined independently to distinguish specifically the nature of the interaction between the laryngeal dysfunction and the speech breathing pattern. Certainly, more information on how the severity of a voice disorder influences speech breathing is necessary.     

Aspartyl methyl ester formation via aspartimide ring opening: a proposed modification of the protocols used in Boc- and Fmoc-based solid-phase peptide synthesis

Aspartimide formation is still an unresolved problem in the solid-phase peptide synthesis of aspartic acid-containing peptides, following either Boc- or Fmoc-based synthetic strategies. α-Aspartyl peptides of high purity can be obtained, despite aspartimide formation, by incorporating an additional step in the Boc- and Fmoc-based solid-phase peptide synthesis protocols, consisting of treatment of the peptide-resin with methanol in the presence of 2% DIEA (v/v) for 15 min immediately after completion of the peptide chain elongation.     

Calculation of nonlinear modes guided by multilayer dielectric structures using the resonance technique

A simple and easily programmable approach based on the resonance method has been developed for analysing optical waves guided by complicated configurations such as multilayer dielectric structures with arbitrary nonlinear media. In this formulation both TE and TM polarizations are considered. In the present paper, as an example of the resonance technique application, the five-layer waveguiding configuration, including two arbitrary nonlinear media along with a linear film of arbitrary profile, is treated. Numerical results are presented in the form of guided power versus propagation constant for various parameters of the problem.     

Experimental and theoretical studies of a high repetition rate fiber laser, mode-locked by external optical modulation

An experimental and theoretical study of a high repetition rate laser source operating on a novel mode-locking technique is presented. This technique relies on the fast saturation and recovery of a semiconductor optical amplifier induced by an external optical pulse and has been used to obtain 4.3 ps pulses at 20 GHz. A complete mathematical model of the fiber ring laser is presented describing the mode-locking process in the laser oscillator and providing solutions for the steady-state mode-locked pulse profile. The critical parameters of the system are defined and analyzed and their impact on the formation of the mode-locked pulses is examined. The comparison between the theoretical results and the experimental data reveals very good agreement and has allowed the optimization of the performance of the system in terms of its critical parameters.