Inclusion behavior of thiacalix[4]arenetetrasulfonate toward water-miscible organic molecules studied by salting-out and X-ray crystallography

[reaction: see text] Inclusion ability of thiacalix[4]arenetetrasulfonate (TCAS) toward water-miscible organic molecules such as alcohols, ketones, cyclic ethers, and so on was studied by salting-out of the inclusion complex. NMR spectra of the recovered precipitates showed size selectivity to include the guest molecules. X-ray crystallographic analyses of TCAS salts including acetone and 1,4-dioxane suggested that guests are retained with the aid of cation coordination and H-bonding.     

Synthesis,structure, and magnetic properties of dinuclear cobalt(II) complexes with a new phenol-based dinucleating ligand with four hydroxyethyl chelating arms

A new end-off type acyclic ligand with four hydroxyethyl arms, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)], formed dinuclear cobalt(II) complexes [Co(2)(bhmp)(OAc)(2)]BPh(4) (1) and [Co(2)(bhmp)(OBz)(2)]BPh(4) (2). The complex 1.2.5CH(3)CN (C(50)H(62.5)BCo(2)N(4.5)O(9)) crystallizes in the monoclinic space group C2/c with dimensions a = 25.424(5) A, b = 13.376(2) A, c = 29.913(6) A, beta = 105.930(3) degrees, and V = 9781(3) A(3) and with Z = 8. X-ray diffraction analysis revealed a mu-phenoxo-bis(mu-acetato)dicobalt(II) core structure containing two octahedral cobalt(II) ions. Electronic spectra were investigated for 1 and 2 in the range 400-1800 nm, and the data were typical for the octahedral high-spin cobalt(II) complexes. Magnetic susceptibility was measured for 1 and 2 over the temperature range 4.5-300 K, and the data were analyzed well using our theoretical method. The best fitting parameters were kappa = 0.77, lambda = -116 cm(-1), Delta = 572 cm(-1), and J = -0.44 cm(-1) for complex 1 and kappa = 0.96, lambda = -93 cm(-1), Delta = 616 cm(-1), and J = -0.33 cm(-1) for complex 2.     

Stereoselective synthesis of all stereoisomers of vicinal and distal bis(O-2-aminoethyl)-p-tert-butylthiacalix[4]arene

O,O″- and O,O′-bis(2-aminoethyl)-p-tert-butylthiacalix[4]arenes of anti conformation have been prepared by the reduction of the corresponding O,O″- and O,O′-bis(cyanomethyl) ethers. Their syn-O,O″- and O,O′-counterparts have been prepared by alternative routes via the Mitsunobu reaction of thiacalix[4]arene with N-(2-hydroxyethyl)phthalimide and the reduction of a O,O′-disiloxanediyl-bridged O″,O?-bis(cyanomethyl) ether of 1,2-alternate conformation, respectively. These products are expected to serve as useful precursors of highly elaborated synthetic receptors, including biscalixarenes.     

Synthesis and Crystal Structure of p-tert-Butylthiacalix[8]arene: A New Member of Thiacalixarenes

Even though it was obtained in poor yield, p-tert-butylthiacalix[8]arene (TC8A) has been synthesized as a new member of thiacalix[n]arenes by the terephthalate-induced cyclization of a mixture of acyclic oligomers, which was obtained by the reaction between p-tert-butylphenol and sulfur with CaO in ethylene glycol/diphenyl ether system. Slow evaporation of the chloroform solution of TC8A afforded guest-free crystals consisting of TC8A itself. The close-packed crystal structure of TC8A resembles that of p-tert-butylcalix[8]arene (C8A) closely, containing a plated loop molecular structure.This revised version was published online in July 2005 with a corrected issue number.     

Homogeneous Oligomeric Ligands Prepared via Radical Polymerization that Recognize and Neutralize a Target Peptide

Abiotic ligands that bind to specific biomolecules have attracted attention as substitutes for biomolecular ligands, such as antibodies and aptamers. Radical polymerization enables the production of robust polymeric ligands from inexpensive functional monomers. However, little has been reported about the production of monodispersed polymeric ligands. Herein, we present homogeneous ligands prepared via radical polymerization that recognize epitope sequences on a target peptide and neutralize the toxicity of the peptide. Taking advantage of controlled radical polymerization and separation, a library of multifunctional oligomers with discrete numbers of functional groups was prepared. Affinity screening revealed that the sequence specificity of the oligomer ligands strongly depended on the number of functional groups. The process reported here will become a general step for the development of abiotic ligands that recognize specific peptide sequences.     

Preconcentration of copper, cadmium, and lead with a thiacalix[4]arenetetrasulfonate-loaded Sephadex A-25 anion-exchanger for graphite-furnace atomic-absorption spectrometry

A rapid column-adsorption method has been developed for concentrating traces of copper, cadmium, and lead in water prior to their determinations by graphite-furnace atomic-absorption spectrometry. The adsorbent used was prepared by loading a strongly basic anion-exchanger QAE-Sephadex A-25 (50 mg) with thiacalix[4]arenetetrasulfonate (20 mol). Two-hundredfold preconcentration of the analyte elements was achieved by passing 100 mL of sample solution (pH 8.0) through a column packed with the adsorbent (6 mm i.d.×7 mm high) at a flow rate of 10 mL min^–1 and by the subsequent elution with 500 L of aqueous nitric acid solution (1 mol L^–1). The practical applicability of the proposed method was evaluated by analyzing certified reference seawater samples.     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Synthesis of all stereoisomers of sulfinylcalix[4]arenes

All four stereoisomers of p-tert-butylsulfinylcalix[4]arene [4(rccc), 4(rcct), 4(rctt), and 4(rtct)], arising from the disposition of the four sulfinyl groups with respect to the mean plane of the four bridging sulfur atoms, have been prepared via oxidation of p-tert-butylthiacalix[4]arene (2) or its tetra-O-benzyl ethers 5 of defined conformations. Thus, treatment of 2 with 4.4 molar equiv of NaBO(3).4H(2)O gave the rtct and rctt isomers in 27% and 17% yields, respectively, while oxidation of cone 5 (5(C)) and partial cone 5 (5(PC)) proceeded stereoselectively to give, after debenzylation of the resulting tetrasulfoxides 12 and 15, the rccc and rcct isomers in 56% and 28% yields, respectively, based on 5. The sulfinylcalix[4]arenes 4 were treated with iodomethane in the presence of a base to give the corresponding tetramethyl ethers 16, the structures of which in regard to the disposition of the sulfinyl groups and the conformation of the phenol units were determined by X-ray crystallography. Also reported is the synthesis of all four conformational isomers of tetra-O-benzyl ether of 2 (5(C), 5(PC), 5(1,2-A), and 5(1,3-A)).     

A function space model approach to the rational evaluation subgroups

Let f : U → X be a map from a connected nilpotent space U to a connected rational space X. The evaluation subgroup G _*(U, X; f), which is a generalization of the Gottlieb group of X, is investigated. The key device for the study is an explicit Sullivan model for the connected component containing f of the function space of maps from U to X, which is derived from the general theory of such a model due to Brown and Szczarba (Trans Am Math Soc 349, 4931–4951, 1997). In particular, we show that non Gottlieb elements are detected by analyzing a Sullivan model for the map f and by looking at non-triviality of higher order Whitehead products in the homotopy group of X. The Gottlieb triviality of a fibration in the sense of Lupton and Smith (The evaluation subgroup of a fibre inclusion, 2006) is also discussed from the function space model point of view. Moreover, we proceed to consideration of the evaluation subgroup of the fundamental group of a nilpotent space. In consequence, the first Gottlieb group of the total space of each S ¹-bundle over the n-dimensional torus is determined explicitly in the non-rational case.