Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006     

Effect of Chain Length of Polyethylene Glycol and Crosslink Density (NCO/OH) on Properties of Castor Oil Based Polyurethane Elastomers

The equilibrium swelling study of polyurethanes (PU) was carried out in various solvents in order to calculate their solubility parameter. The kinetics of swelling and sorption have also been studied in 1,4‐dioxane at 30°C. The PU was synthesized by reacting a novel polyol (castor oil derivative and epoxy based resin, EpxR) and one of the polyethylene glycols (PEG 200, PEG 400, PEG 600) with different weight compositions, with a toluene diisocyanate (TDI) adduct (derived from toluene diisocyanate and R60 polyol). Different NCO/OH ratio viz. 1, 1.3 and 1.7 were employed in the study. The results were found to vary with the weight composition of polyol components, as well as the crosslink density of the samples. The sorption behavior is also found to vary with the molecular weight of polyethylene glycol employed in the preparations of the polyurethanes. Kinetic studies of swelling revealed that the sorption is anomalous in nature. The diffusion coefficient (D) increased with an increase in the NCO/OH ratio and decreased with an increase in chain length of polyethylene glycol. The sorption coefficient (S) decreased with an increase in crosslink density (NCO/OH) and increased with increasing polyethylene glycol (i.e., PEG 200, PEG 400, and PEG 600) moieties in the polyurethanes. The molecular weight between two crosslink points was calculated using the Flory Rehner equation (24), and hence, the number of chains per unit volume (N) and degree of crosslinking (ν) in all the samples were determined.     

Synthesis and characterizations of water-based ferrofluids of substituted ferrites [Fe1−xBxFe2O4, B=Mn,Co (x=0–1)] for biomedical applications

Nanomagnetic particles have great potential in the biomedical applications like MRI contrast enhancement, magnetic separation, targeting delivery and hyperthermia. In this paper, we have explored the possibility of biomedical applications of [Fe_1−xB_xFe₂O₄, B=Mn, Co] ferrite. Superparamagnetic particles of substituted ferrites [Fe_1−xB_xFe₂O₄, B=Mn, Co (x=0–1)] and their fatty acid coated water base ferrofluids have been successfully prepared by co-precipitation technique using NH4OH/TMAH (Tetramethylammonium hydroxide) as base. In vitro cytocompatibility study of different magnetic fluids was done using HeLa (human cervical carcinoma) cell lines. Co²⁺-substituted ferrite systems (e.g. CoFe₂O₄) is more toxic than Mn²⁺-substituted ferrite systems (e.g. MnFe₂O₄, Fe_0.6Mn_0.4Fe₂O₄). The later is as cytocompatible as Fe₃O₄. Thus, Fe_1−xMn_xFe₂O₄ could be useful in biomedical applications like MRI contrast agent and hyperthermia treatment of cancer.     

Electron beam irradiated polyamide-6,6 films—II: mechanical and dynamic mechanical properties and water absorption behavior

Electron beam irradiation of poly(iminohexamethylene-iminoadipoyl) (Polyamide-6,6) films was carried out over a range of irradiation doses (20–500 kGy) in air. The mechanical properties were studied and the optimum radiation dose was 200 kGy, where the ultimate tensile stress (UTS), 10% modulus, elongation at break (EB) and toughness showed significant improvement over the unirradiated film. At a dose of 200 kGy, the UTS was improved by 19%, the 10% modulus by 9% and the EB by 200% over the control. The dynamic mechanical properties of the films were studied in the temperature region 303–473 K to observe the changes in the glass transition temperature (T_g) and loss tangent (tan δ) with radiation dose. The storage modulus of the film receiving a radiation dose of 200 kGy was higher than the unirradiated film. The water uptake characteristics of the Polyamide-6,6 films were investigated. The water uptake was less for the films that received a radiation dose of 200 and 500 kGy than the unirradiated film. The role of crystallinity, crosslinking and chain scission in affecting the tensile, dynamic mechanical and water absorption properties was discussed.     

A solvolysis model for 2-chloro-2-methyladamantane based on the linear solvation energy approach

Solvolysis/dehydrohalogenation rates of 2-chloro-2-methyladamantane (CMA) in 15 hydrogen-bond acidic and/or basic solvents are studied. The rates of reaction in these solvents have been correlated with the solvation equation developed by Kamlet, Abraham, and Taft. The linear solvation energy relationship (LSER) derived from this study is given by the following equation: log k = -5.409 + 2.219 + 2.505alpha(1) - 1.823beta(1) where , alpha(1), and beta(1) are the solvation parameters that measure the solvent dipolarity/polarizability, hydrogen-bond acidity (electrophilicity), and hydrogen-bond basicity (nucleophilicity). A high correlation coefficient (r = 0.996, SD = 0.191) was achieved. The cavity term, which includes the Hildebrand parameter for solvent cohesive energy density, delta(H), was not found to be statistically significant for this reaction substrate. The resulting equation allows calculated rates of reaction in other solvents and provides insight into the reaction pathway. In a previously reported correlation for another tertiary chloride, tert-butyl chloride (TBC), the coefficients for alpha(1) and are significantly larger and the coefficient for is statistically significant. In addition, the coefficient for beta(1) in the TBC correlation is positive, rather than negative, indicating that the transition states for TBC and CMA are significantly different. These results demonstrate why the uses of simple solvolytic correlation methods may be invalid even for comparisons of similar type substrates, e.g., tertiary chlorides. Also, these results provide confidence in the use of multiple linear regression analysis for predicting solvolytic rates in additional solvents.     

A host-guest optical sensor for aliphatic amines based on lipophilic cyclodextrin

A host-guest optical sensor for the determination of aliphatic amines as exemplified by octylamine is proposed. It is based on the reversible fluorescence enhancement of heptakis(2,6-di-O-isobutyl)-β-cyclodextrin(DOB-β-CD) hosting tetraphenylporphyrin (TPP) immobilized in poly(vinyl chloride) (PVC) membrane by aliphatic amine extracted from aqueous phase into membrane phase. The optimum membrane contained 1.15 wt % TPP, 6.15 wt % DOB-β-CD as sensing reagent and other membrane materials. The fluorescence enhancement of the membrane resulted from the formation of a stable three-component complex among DOB-β-CD, TPP, and aliphatic amines. With the optimum conditions described, the fluorescence response of the sensor to octylamine shows a good correlation with the theoretically derived equation in the range 1.0 × 10^–6 to 8.0 × 10^–4 mol/L. The response characteristics including reversibility, response time, reproducibility and lifetime and selectivity of this optical device are also discussed in detail. This sensor has also been applied for the determination of octylamine in water samples containing interferents with satisfactory recovery.     

Synthetic magnetic opals

We present studies of novel nanocomposites of BiNi impregnated into the structure of opals as well as inverse opals. Atomic force microscopy and high resolution elemental analyses show a highly ordered structure and uniform distribution of the BiNi filler in the matrix. These BiNi-based nanocomposites are found to exhibit distinct ferromagnetic-like ordering with transition temperature of about 675 K. As far as we know there exists no report in literature on any BiNi compound which is magnetic.     

Unexpected shish-kebab structure in a sheared polyethylene melt

Scanning electron micrographs of a solvent-extracted sheared polyethylene (PE) blend revealed, for the first time, an unexpected shish-kebab structure with multiple shish. The blend contained 2 wt % of crystallizing ultrahigh molecular weight polyethylene (UHMWPE) and 98 wt % of noncrystallizing PE matrix. The formation of multiple shish was attributed to the coil-stretch transition occurring in sections of UHMWPE chains. Synchrotron x-ray data provided clear evidence of the hypothesis that multiple shish originate from stretched chain sections and kebabs originate from coiled chain sections, following a diffusion-controlled crystallization process.     

Orientation-induced crystallization in isotactic polypropylene melt by shear deformation

Development of orientation-induced precursor structures (nuclei) prior to crystallization in isotactic polypropylene melt under shear flow was studied by in-situ synchrotron small-angle X-ray scattering (SAXS) and rheo-optical techniques. SAXS patterns at 165°C immediately after shear (rate = 60 s⁻¹, t_s = 5 s) showed emergence of equatorial streaks due to oriented structures (microfibrils or shish) parallel to the flow direction and of meridional maxima due to growth of the oriented layer-like structures (kebabs) perpendicular to the flow. SAXS patterns at later times (t = 60 min after shear) indicated that the induced oriented structures were stable above the nominal melting point of iPP. DSC thermograms of sheared iPP samples confirmed the presence of two populations of crystalline fractions; one at 164°C (corresponding to the normal melting point) and the other at 179°C (corresponding to melting of oriented crystalline structures). Time-resolved optical micrography of sheared iPP melt (rate = 10 s⁻¹, t_s = 60 s, T = 148°C) provided further information on orientation-induced morphology at the microscopic scale. The optical micrographs showed growth of highly elongated micron size fibril structures (threads) immediately after shear and additional spherulities nucleated on the fibrils at the later stages. Results from SAXS and rheo-optical studies suggest that a stable scaffold (network) of nuclei, consisting of shear-induced microfibrillar structures along the flow direction superimposed by layered structures perpendicular to the flow direction, form in polymer melt prior to the occurance of primary crystallization. The scaffold dictates the final morphological features in polymer.     

Bio-inspired computation using synthetic genetic network

Potential of synthetic genetic network, Repressilator, to work as logical computing unit is observed. It is shown that two variables of gene network yield simultaneously, the basic AND or OR gate with their complementary NAND or NOR gate, with the variation of the internal parameter of the system. This allows the gene network to work as a strong candidate for parallel computing. Stability or robustness of gates is also checked in noisy background.