The Investigation of Bulk and Surface Polariton Modes in Ga1?xNxAs by Using Infrared Magneto Spectroscopy

We present and discuss infrared magnetoplasma reflectivity and surface polariton modes in Ga_1–xN_xAs. It assumed that the sample is characterized by a magnetoplasma dielectric tensor. Surface polariton dispersion for two component magnetoplasma was calculated from reflectivity spectra data. We detect transverse optic phonon of GaN sublattice in 470 cm^-1. The origin of sharp feature in p-polarization reflectivity about 300 cm^–1 as well as LO phonon frequency of GaAs sublattice is due to Brewster mode. An interesting feature of surface modes in Voigt geometry is nonreciprocalicity, which means that the frequency changes when the direction of propagation is reversed. Also, the infrared magnetoplasma reflectivity of GaNAs should be providing determination of the electrons and heavy holes effective mass and carrier's concentration.     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Influences of nanoparticles and chain length on thermodynamic and electrical behavior of fluorine liquid crystals

Hydrogen-bonded polar nematic liquid crystal series with the general formula nOBAF (n = 7—12) is studied. The mesomorphic characterization is demonstrated through differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The complexes with short alkyl chains (n=7, 8) present a wide nematic range and monotropic smectic F mesophase, whereas the longer alkyl chain (n=10—12) analogues show high melting and low clearing mesomorphic liquid crystals. The thermal range of the mesophase and the birefringence increase with chain length decreasing. Furthermore, the effect of the nanoparticles (LiNbO₃) on the thermal and the electrical behavior of 8OBAF are investigated. The presence of LiNbO₃ nanoparticles increases the conductivity and reduces the resistivity of the complex.     

The effect of starvation periods on the performance of a two-liquid-phase mixed tank bioreactor for removal of n-hexane from air streams

In this research the effect of silicone oil as a heavy organic solvent on the performance of a mixed tank bioreactor was investigated. In the first stage of the experiments, the response of a two-liquid-phase mixed tank bioreactor to periods of n-hexane starvation was compared with that of a control bioreactor. In the control bioreactor, after 3?days of starvation, approximately six days were needed to reach the removal efficiency it had before starvation. This figure was only 10?h for the silicone oil-containing bioreactor. The results confirmed that inclusion of a heavy organic solvent can increase the elimination capacity of a bioreactor and to help sustain high elimination capacity after starvation periods. In the second stage of the experiments, the effect of the amount of silicone oil on the performance of the bioreactor was investigated. Increasing the amount of oil from 5 to 10% (v/v) increased the maximum elimination capacity from 106 to 117?g/m³?h.     

Synthesis and Absorption Properties of Some 4-Thioaryl-1,8-naphthalimides and 4-Thioaryl-7H-benzimidazo-[2,1-a]-benz-[d,c]-isoquinolin-7-one Derivatives

A series of novel 4-thioaryl-1,8-naphthalimide derivatives were synthesized using 4-chloro-1,8-naphthalic anhydrid and arylthioles as starting materials. 4-thioaryl-1,8-naphthalic anhydride was treated with different primary amines and o-phenylene diamine or 1,2-diaminoethene to produce 4-thioaryl-1,8-naphthalimides and 4-thioaryl-7 H-benzimidazo-[2,1-a]-benz-[d,c]-isoquinolin-7-one derivatives, respectively. The UV/VIS absorption properties are discussed.     

A Simple and Highly Efficient One-Pot Procedure for the Synthesis of Amides via Beckmann Rearrangements Using 1-Tosylimidazole (TsIm)

A facile and highly efficient method for one-pot Beckmann rearrangement of ketoximes into N-substituted amides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, ketoximes are refluxed with TsIm and Cs₂CO₃ in the presence of SiO₂ as a recyclable catalyst in DMF affording the corresponding amides in high yields. This methodology is highly efficient and regioselective for various structurally diverse ketoximes including symmetrical and unsymmetrical as well as cyclic oximes. The results of quantum mechanical studies used to rationalize the experimental outcomes are discussed.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Simple and Highly Efficient Procedure for Conversion of Aldoximes to Nitriles Using N-(p-Toluenesulfonyl) Imidazole

A facile and efficient method for dehydration of aldoximes into nitriles using N-(p-toluenesulfonyl) imidazole (TsIm) is described. In this method, aldoximes were refluxed with TsIm in the presence of 1,8-diazabicyclo-[5.4.0]undec-7-ene (DBU) in dimethylformamide (DMF) to afford the corresponding nitriles in good yields. This methodology is highly efficient for various structurally diverse aldoximes including aromatic, heteroaromatic, and aliphatic oximes. A plausible mechanism for the conversion of aldoxime into nitriles using TsIm/DBU is explained.     

Application of artificial neural networks for formulation and modeling of dye adsorption onto multiwalled carbon nanotubes

In this study, an artificial neural network (ANN) has been developed to predict the adsorption amount of dye (methylene blue) onto multiwalled carbon nanotubes. Batch experiments have been carried out to obtain experimental data. Important parameters in the adsorption system such as initial dye concentration, adsorbent dosage, temperature, pH and contact time have been used as the inputs of the network, while the output is the final concentration of dye in aqueous solution after adsorption. The neural network structure has been optimized by testing various training algorithms and different number of neurons in a hidden layer. An empirical equation for determination of final dye concentration in aqueous solutions after adsorption has been developed by using the weights of the optimized network. The results of the optimized ANN have been compared with conventional models in equilibrium and kinetic fields. According to error analysis and determination coefficient, the ANN was found to be the most appropriate model to describe this adsorption process. Sensitivity analysis showed that initial dye concentration, pH and contact time are the most effective parameters in this process. The influence percentages of these parameters on the output were 28, 24 and 24 %, respectively.