Capillary zone electrophoresis of cationic and anionic drugs in methanol

The actual mobilities and dissociation constants of acidic and basic pharmaceuticals were determined in methanol. Actual mobilities were derived from the dependence of the effective mobilities of the analytes on the pH of the methanolic background electrolyte solution (pH(MeOH)). The pKa values of the pharmaceuticals in methanol (pK(a,MeOH)) were calculated by non-linear curve fitting to the measured mobility values. It was found that the shift in pKa value (when compounds were transferred from water to methanol) increased with the acidity of the analyte. The average pKa shift for compounds exhibiting acidic properties in water was ca. 5.5 units, and the shift for basic compounds about 2 units. As was shown for a mixture of beta-blockers, the calculated actual mobilities and pKa values can be utilised in the optimisation of pH conditions for separation. The practical value of the method was illustrated by the analysis of urine samples.     

Properties of compounds of type NaxSi46 and NaxSi136

A qualitative account is given of the electrical and magnetic properties of compounds of the type Na_xSi₁₃₆. It is suggested that a metal-insulator transition takes place with decreasing x. It is conjectured that in sintered powders the resistance is due to amorphous contacts between grains, leading to a resistivity proportional to $\text{A}\text{T}{}^{\mathrm{<mtext>1</mtext><mtext>4</mtext>}}$.     

Separation and determination of metals as complexes of 1-nitroso-2-naphthol-6-sulphonic and 2-nitroso-1-naphthol-6-sulphonic acids

A sensitive ion-pair liquid-liquid extraction-spectrophotometric method has been developed for the determination of copper, palladium, iron and cobalt, based on the formation of metal complexes with 1-nitroso-2-naphthol-6-sulphonic acid or 2-nitroso-1-naphthol-6-sulphonic acid as primary ligand, and zephiramine as counter-ion. The coloured metal complexes obtained over different pH ranges are easily and quantitatively extracted into dichloromethane. The method has been tested with samples containing known amounts of copper, palladium, iron and cobalt in ultrapure water. The reagents provide a sensitive spectrophotometric method for determining these metals.     

Design and evaluation of a Dean vortex-based micromixer

A mixer, based on the Dean vortex, is fabricated and tested in an on-chip format. When fluid is directed around a curve under pressure driven flow, the high velocity streams in the center of the channel experience a greater centripetal force and so are deflected outward. This creates a pair of counter-rotating vortices moving fluid toward the inner wall at the top and bottom of the channel and toward the outer wall in the center. For the geometries studied, the vortices were first seen at Reynolds numbers between 1 and 10 and became stronger as the flow velocity is increased. Vortex formation was monitored in channels with depth/width ratios of 0.5, 1.0, and 2.0. The lowest aspect ratio strongly suppressed vortex formation. Increasing the aspect ratio above 1 appeared to provide improved mixing. This design has the advantages of easy fabrication and low surface area.     

Isotachophoresis of beta-blockers in a capillary and on a poly(methyl methacrylate) chip

Analysis of the beta-blockers oxprenolol, atenolol, timolol, propranolol, metoprolol, and acebutolol in human urine by a combination of isotachophoresis (ITP) and zone electrophoresis (ZE) was investigated. Methods were developed with a conventional capillary electrophoresis (CE) apparatus and a poly(methyl methacrylate) (PMMA) microchip system. With CE the separation of oxprenolol, atenolol, timolol, and acebutolol from a standard solution containing 5 microg/mL of each compound was accomplished by performing ZE with transient ITP. The electrolyte system consisted of 10 mM sodium morpholinoethane sulfonate (pH 5.5) and 0.1% methylhydroxyethylcellulose as the leading electrolyte and 30 mM ortho-phosphoric acid (pH 2.0) as both the terminating and the ZE background electrolyte. With the microchip system the separation of oxprenolol and acebutolol from a standard solution containing 10 microg/mL of each compound was accomplished by a coupled-channel ITP-ZE device using the same leading electrolyte solution as the CE system but 5 mM glutamic acid (pH 3.4) as terminating and background electrolytes. The systems were used for analyses of patient urine samples. Water-soluble hydrophilic matrix compounds were removed from the urine samples by solid-phase extraction (SPE). Limits of quantification below 5 microg/mL could be achieved. The PMMA ITP-ZE chip has not earlier been used for analyses of any drugs from urine samples.     

Chiral separation of dansyl amino acids by capillary electrophoresis: Comparison of formamide andN-Methylformamide as background electrolytes

Summary Chiral separation of 12 dansyl amino acids has been achieved by capillary electrophoresis using -cyclodextrin dissolved inN-methylformamide or formamide. The viscosity and the dielectric constants of these two solvents are very different, giving them disimilar electrophoretic properties. Intense electroosmotic flow, high electrophoretic mobilities and high efficiency were achieved inN-methylformamide, but high chiral selector concentration was needed for sufficient resolution. In contrast, the separation of dansyl amino acids in formamide was characterized by longer analysis time and lower efficiency, but the resolution and selectivity of the separation were better and baseline separation could be achieved at lower -cyclodextrin concentrations.     

Optimization of capillary electrophoretic-electrospray ionization-mass spectrometric analysis of catecholamines

The capillary electrophoretic-mass spectrometric analysis (CE-MS) of catecholamines was optimized with coaxial sheath flow interface and electrospray ionization (ESI). The parameters studied included the sheath liquid composition and its flow rate, separation conditions in ammonium acetate buffer together with the ESI and cone voltages as mass spectrometric parameters. In addition, the effect of ESI voltage on injection as well as the siphoning effect were considered. The optimized conditions were a sheath liquid composition of methanol-water (80:20 v/v) with 0.5% acetic acid, with a flow rate of 6 microL/min. The capillary electrophoretic separation parameters were optimized with 50 mM ammonium acetate buffer, pH 4.0, to +25 kV separation voltage together with a pressure of 0.1 psi. The most intensive signals were obtained with an ESI voltage of +4.0 kV and a cone voltage of +20 V. The nonactive ESI voltage during injection as well as avoidance of the siphoning effect increased the sensitivity of the MS detection considerably. The use of ammonium hydroxide as the CE capillary conditioning solution instead of sodium hydroxide did not affect the CE-MS performance, but allowed the conditioning of the capillary between analyses to be performed in the MS without contaminating the ion source.     

The deposition of nanostructured β-PbO2 coatings from aqueous methanesulfonic acid for the electrochemical oxidation of organic pollutants

Highly crystalline, nanostructured, three-dimensional β-PbO₂ coatings were successfully obtained by galvanostatic deposition from baths containing aqueous lead(II) and methanesulfonic acid (CH₃SO₃H). This constitutes a much more environmentally friendly methodology compared to plating of β-PbO₂ in HNO₃. The deposits exhibited high quality and good adherence. The crystallite size was in the range 20–30 nm and AFM imaging revealed very uniform, rough deposits (i.e., 255–275 nm rms). The oxidative destruction of Methyl Orange azo dye was studied by electrochemical advanced oxidation processes (EAOPs). An electro-Fenton process with a high surface area carbon-felt cathode performed better than the single anodic oxidation. Rapid and complete decolorisation was achieved following pseudo first-order kinetics. The stability of the β-PbO₂ electrodes during the electrolyses was also demonstrated.