Enhancement of dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal mixture by dispersing nano-sized copper oxide

ABSTRACT

Here, we present the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared ferroelectric liquid crystal (FLC) mixture, namely W302. The FLC mixture, comprising of pyrimidine compounds, was characterised through dielectric spectroscopy, differential scanning calorimetry (DSC), polarising optical microscopy (POM) and other electro-optical methods. The material parameters such as spontaneous polarisation, rotational viscosity, response time and tilt angle of W302 were found to be 14 nC/cm², 240 mPa.s, 150 µs and 28^?, respectively. The phase transition temperatures of W302 were observed through DSC and further confirmed by the dependence of dielectric loss factor in homogeneously aligned FLC sample with temperature. We also demonstrate the observance of a low-frequency dielectric relaxation mode due to the unwinding of the helix, called as partially unwound helical mode (p-UHM) along with Goldstone mode. The behaviour of p-UHM has been systematically studied with temperature and applied bias field. Further, dispersion of nCuO into host W302 has shown a significant increase in dielectric permittivity. Also, the p-UHM relaxation peak in the dielectric regime has disappeared with the incorporation of nCuO. These studies would be useful to fabricate better electro-optical devices for display, switching and beam steering applications. The formulation and characterization of a ferroelectric liquid crystal (FLC) mixture W302 composed of pyrimidine compounds is presented. Then, we observed the effect of copper (II) oxide nanoparticles (nCuO) on dielectric and electro-optical parameters of a newly prepared and characterized FLC mixture.     

Mn(Ⅱ)和Ce(Ⅳ)离子对铬酸氧化乳酸的影响

The kinetics and mechanism of lactic acid oxidation in the presence of Mn(II)and Ce(IV)ions by chromic acid were studied spectrophotometrically.The oxidation of lactic acid by Cr(VI)was found to proceed in two measurable steps,both of which gave pyruvic acid as the primary product in the absence of Mn(II).2Cr(VI) 2CH3CHOHCOOH→2CH3COCOOH Cr(V) Cr(III)Cr(V) CH3CHOHCOOH→Cr(III) CH3COCOOH The observed kinetics was explained due to the catalytic and inhibitory effects of Mn(II)and Ce(IV)on the lactic acid oxidation by Cr(VI).The reactivity of lactic acid depends upon the experimental conditions.It acts as a two-or three-equivalent reducing agent in the absence or presence of Mn(II).It was examined that Cr(III)products resulting from the direct reduction of Cr(VI)by three-equivalent reducing agents.The oxidation of lactic acid follows the complex order kinetics with respect to [lactic acid].The activation parameters Ea,ΔH#,and ΔS# were calculated and discussed.     

Effect of bovine serum albumin on the surface properties of ionic liquid-type Gemini surfactant

The effect of bovine serum albumin on the surface properties of IL-type gemini surfactant ([C₁₀-4-C₁₀im]Br₂), have been investigated by surface tension method. The critical micelle concentration (CMC) as a function of BSA concentrations at various temperatures was investigated. The CMC of [C₁₀-4-C₁₀im]Br₂ increases with increasing the concentration of BSA as well as the temperature of the system. The interfacial parameters viz; maximum surface excess concentration (Γ_max), the minimum area per molecule (A_min), and surface pressure at CMC (Π_cmc) were calculated. In addition, thermodynamic parameters of adsorption and micellization were evaluated by using surface tension data. The results indicated that the binding of [C₁₀-4-C₁₀im]Br₂ to BSA is spontaneous and exothermic in nature. The process is entropy driven and hydrophobic interactions are the major driving forces.     

Thermal decomposition of model compound of algal biomass

This contribution investigates thermal decomposition of leucine, as a representative model compound for amino acids in algal biomass. We map out potential energy surface for a wide array of unimolecular and self-condensation reactions operating in the decomposition of leucine. Decarboxylation and dehydration of leucine ensues by eliminating CO₂ and –OH, respectively, from the –COOH group attached to the α-carbon. The molecular channel for deamination involves cleavage of NH₂ from α-carbon of leucine. The activation energies for direct elimination of CO₂, NH₃, and H₂O from a leucine molecule lie within 20.7 kJ/mol of each other. Activation energies for these decomposition pathways reside below the bond dissociation enthalpy of H–C(α) of 323.1 kJ/mol. The decarboxylation, deamination, and dehydration pathways, via radical-prompted pathways, systematically require lower energy barriers, in reference to closed-shell reaction corridors. Detailed computations at the CBS-QB3 level provide the Arrhenius rate parameters for the unimolecular and bimolecular reactions, and standard enthalpies of formation, standard entropies, and heat capacities for all the products and intermediates. A kinetic analysis of gas-phase reactions, within the context of a plug-flow reactor model, accounts qualitatively for the formation of major products observed experimentally in the thermal degradation of the condensed-phase leucine. Among notable N-containing species, the model predicts the prevailing of NH₃ over HCN and HNCO, in addition to corresponding appreciable concentrations of amines, imines, and nitriles. Our detailed kinetic investigation illustrates a negligible contribution of the self-condensation reactions of leucine in the gas phase.     

Transferred multipolar atom model for 10β,17β‐dihydroxy‐17α‐methylestr‐4‐en‐3‐one dihydrate obtained from the biotransformation of methyloestrenolone

Biotransformation is the structural modification of compounds using enzymes as the catalysts and it plays a key role in the synthesis of pharmaceutically important compounds. 10β,17β‐Dihydroxy‐17α‐methylestr‐4‐en‐3‐one dihydrate, C₁₉H₂₈O₃·2H₂O, was obtained from the fungal biotransformation of methyloestrenolone. The structure was refined using the classical independent atom model (IAM) and a transferred multipolar atom model using the ELMAM2 database. The results from the two refinements have been compared. The ELMAM2 refinement has been found to be superior in terms of the refinement statistics. It has been shown that certain electron‐density‐derived properties can be calculated on the basis of the transferred parameters for crystals which diffract to ordinary resolution.     

Micellar Catalysis on the Redox Reaction of Ascorbic Acid-Vanadium(V) System

Stoichiometry of the redox reaction of vanadium(V) by ascorbic acid (H₂A) has been experimentally determined to be H₂A + 2V(V) → A + 2V(IV) + 2H ⁺ . Evidence of induced polymerization of acrylonitrile and the reduction of mercuric chloride indicates that a free-radical mechanism operates during the course of reaction. Vanadium(V) is only reduced to vanadium(IV). The kinetics of this redox reaction have been investigated spectrophotometrically at 35°C in acidic media of H₂SO₄. In this kinetic study we have observed the nature of vanadium(V)-H₂A interaction in presence of anionic surfactant of SDS. In V(V)-H₂A system, the addition of anionic surfactant (SDS) enhanced the reaction rate and shows catalytic effect. This trend was explained by the incorporation/solubilization of vanadium(V) and ascorbic acid in the Stern layer.     

Determination of phosphate in freshwater samples by flow-injection with lucigenin chemiluminescence

Lucigenin chemiluminescence (CL) in conjunction with flow-injection analysis (FIA) is used for the determination of phosphate in freshwater samples. The procedure is based on the formation of molybdophosphoric heteropoly acid (MoP–HPA) by the reaction of phosphate and ammonium molybdate under acidic conditions. CL emission was observed as a result of oxidation of lucigenin in aqueous sodium hydroxide solution in the presence of MoP–HPA. Calibration was linear up to 500?µg?L^?1 (r ^2?=?0.9998; n?=?8), with a detection limit (S/N?=?3) of 0.95?µg?L^?1. An injection throughput of 120 h^?1, and relative standard deviation (RSD; n?=?4) of 1.3–3.2% were achieved in the concentration range studied. An on-line chelating column was used to remove interfering cations. The method was applied to freshwater samples, and the results (51?±?1.0 – 107?±?2.0?µg?L^?1) did not differ significantly from results obtained using a spectrophotometric method (52.5?±?1.0 – 102?±?2.0?µg?L^?1) at 95% confidence level (t-test).     

A study of heat and mass transfer of Non-Newtonian fluid with surface chemical reaction

Considering the significance of non-Newtonian fluid usage in manufacturing such as molten plastics, polymeric materials, pulps, and so on, significant efforts have been made to investigate the phenomenon of non-Newtonian fluids. In this article the influences of heat and mass transfer on non-Newtonian Walter's B fluid flow over uppermost catalytic surface of a paraboloid is encountered. An elasticity of the fluid layer is considered in the freestream together with heat source/sink and has the tendency to cause heat flow in the fluid saturated domain. The flow problem of two-dimensional Walter's B fluid is represented using Law of conservation of mass, momentum, heat, and concentration along with thermal and solutal chemical reactive boundary conditions. The governing equations are non-linear partial differential equation and are non-dimensionalized by employing stream function and similarity transformation. The final dimensionless equations yielded are coupled non-linear ordinary differential equations. Furthermore, shooting technique along with RK-4th order method is used to get the numerical results. Graphs and tables are modeled by using MATLAB software to check the effects of Walter's B parameter, Chemical reaction parameter and Thickness parameter on temperature, velocity, and concentration profiles. Tabular analysis shows the results of some physical parameters like skin friction coefficient, Nusselt number and Sherwood number due to the variation of Walter's B parameter, thickness parameter and chemical reactive parameter.     

Biomedical Applications of Scutellaria edelbergii Rech. f.: In Vitro and In Vivo Approach

In the current study, in vitro antimicrobial and antioxidant activities and in vivo anti-inflammatory and analgesic activities of Scutellaria edelbergii Rech. f. (crude extract and subfractions, i.e., n-hexane, ethyl acetate (EtOAc), chloroform, n-butanol (n-BuOH) and aqueous) were explored. Initially, extraction and fractionation of the selected medicinal plant were carried out, followed by phytochemical qualitative tests, which were mostly positive for all the extracts. EtOAc fraction possessed a significant amount of phenolic (79.2 ± 0.30 mg GAE/g) and flavonoid (84.0 ± 0.39 mg QE/g) content. The EtOAc fraction of S. edelbergii exhibited appreciable antibacterial activity against Gram-negative (Escherichia coli and Klebsiella pneumoniae) strains and significant zones of inhibition were observed against Gram-positive bacterial strains (Bacillus subtilis and Staphylococcus aureus). However, it was found inactive against Candida Albicans and Fusarium oxysporum fungal strains. The chloroform fraction was the most effective with an IC₅₀ value of 172 and 74 µg/mL against DPPH (1,1-Diphenyl-2-picryl-hydrazyl) and ABTS assays, in comparison with standard ascorbic acid 59 and 63 µg/mL, respectively. Moreover, the EtOAc fraction displayed significant in vivo anti-inflammatory activity (54%) using carrageenan-induced assay and significant (55%) in vivo analgesic activity using acetic acid-induced writing assay. In addition, nine known compounds, ursolic acid (UA), ovaul (OV), oleanolic acid (OA), β-sitosterol (BS), micromeric acid (MA), taraxasterol acetate (TA), 5,3′,4′-trihydroxy-7-methoxy flavone (FL-1), 5,7,4′-trihydroxy-6,3′-dimiethoxyflavone (FL-2) and 7-methoxy catechin (FL-3), were isolated from methanolic extract of S. edelbergii. These constituents have never been obtained from this source. The structures of all the isolated constituents were elucidated by spectroscopic means. In conclusion, the EtOAc fraction and all other fractions of S. edelbergii, in general, displayed a significant role as antibacterial, free radical scavenger, anti-inflammatory and analgesic agents which may be due to the presence of these constituents and other flavonoids.     

Structural,magnetic and electrical properties of Co1−xZnxFe2O4 synthesized by co-precipitation method

Nanoparticles of Co_1−xZn_xFe₂O₄ with stoichiometric proportion (x) varying from 0.0 to 0.6 were prepared by the chemical co-precipitation method. The samples were sintered at 600 °C for 2 h and were characterized by X-ray diffraction (XRD), low field AC magnetic susceptibility, DC electrical resistivity and dielectric constant measurements. From the analysis of XRD patterns, the nanocrystalline ferrite had been obtained at pH=12.5–13 and reaction time of 45 min. The particle size was calculated from the most intense peak (3 1 1) using the Scherrer formula. The size of precipitated particles lies within the range 12–16 nm, obtained at reaction temperature of 70 °C. The Curie temperature was obtained from AC magnetic susceptibility measurements in the range 77–850 K. It is observed that Curie temperature decreases with the increase of Zn concentration. DC electrical resistivity measurements were carried out by two-probe method from 370 to 580 K. Temperature-dependent DC electrical resistivity decreases with increase in temperature ensuring the semiconductor nature of the samples. DC electrical resistivity results are discussed in terms of polaron hopping model. Activation energy calculated from the DC electrical resistivity versus temperature for all the samples ranges from 0.658 to 0.849 eV. The drift mobility increases by increasing temperature due to decrease in DC electrical resisitivity. The dielectric constants are studied as a function of frequency in the range 100 Hz–1 MHz at room temperature. The dielectric constant decreases with increasing frequency for all the samples and follow the Maxwell–Wagner's interfacial polarization.