Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

High precision delta(17)O isotope measurements of oxygen from silicates and other oxides: method and applications

The use of infrared laser-assisted fluorination to release oxygen from milligram quantities of silicates or other oxide mineral grains is a well-established technique. However, relatively few studies have reported the optimisation of this procedure for oxygen-17 isotope measurements. We describe here details of an analytical system using infrared (10 μm) laser-assisted fluorination, in conjunction with a dual inlet mass spectrometer of high resolving power ( approximately 250) to provide (17)O and (18)O oxygen isotope measurements from 0.5-2 mg of silicates or other oxide mineral grains. Respective precisions (1) of typically 0.08 and 0.04 per thousand are obtained for the complete analytical procedure. Departures from the mass-dependent oxygen isotope fractionation line are quantified by Delta(17)O; our precision (1) of such measurements on individual samples is shown to be +/-0.024 per thousand. In turn, this permits the offset between parallel, mass-dependent fractionation lines to be characterised to substantially greater precision than has been possible hitherto. Application of this system to investigate the (17)O versus (18)O relationship for numerous terrestrial whole-rock and mineral samples, of diverse geological origins and age, indicates that the complete data set may be described by a single, mass-dependent fractionation line of slope 0.5244+/- 0.00038 (standard error). Copyright 1999 John Wiley & Sons, Ltd.     

1H-1,2,3-triazole,a promising precursor for chemical vapor deposition of hydrogenated carbon nitride

Well-crystallized hydrogenated carbon nitride thin films have been prepared by microwave plasma enhanced chemical vapor deposition (MWPECVD). 1H-1,2,3-triazole+N₂ and Si (1 0 0) were used as precursor and substrate, respectively. Substrate temperature during the deposition was recorded to be 850 °C. The synthesized samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photo-electron spectroscopy (XPS) analyses. The plasma compositions were checked by optical emission spectroscopy (OES). XRD observation strongly suggests that the films contain polycrystalline carbon nitride with graphitic structure of (1 0 0), (0 0 2), (2 0 0) and (0 0 4). XPS peak quantification reveals that the atomic ratio of the materials C:N:O:Si is 32:41:18:9. X-ray photo-electron peak deconvolution shows that the most dominant peak of C (1s) and N (1s) narrow scans correspond to sp² hybrid structure of C₃N₄. These observations indicate that 1H-1,2,3-triazole favors the formation of hydrogenated carbon nitride with graphitic phase by CVD method and thus is in good agreement with XRD results. SEM of surface and OES of plasma also support the formation of polycrystalline carbon nitride films from 1H-1,2,3-triazole+N₂ by CVD.     

泥沙输运模拟综述——现状及其发展趋势

随着流体力学中数值方法的飞速发展,计算模型已经成为研究流体运动,泥沙输运和不同环境(诸如河流,湖泊及沿海地区)中相应污染物归趋过程等方面非常有吸引力的工具,在过去的30多年里,发展了许多计算水动力学/泥沙输运模型.文章追溯当前具有代表性的(一维、二维、三维)模型的发展历程,描述他们各自的特点,优势及局限,力图作为对模型方面感兴趣读者的第一指南,同时也为大家讨论模型的局限性,未来的发展趋势和研究需求方面搭建一个平台.给出了模型的表达,时空特性,水动力学和沉积物的耦合方式,处理非恒定流,推移质和悬移质,泥沙交换过程,泥沙类型(粘性或非粘性)及非均匀泥沙输运的能力.总结了不同模型的应用实例,读者可以运用这些例子作为研究模型设置,模型率定及模型验证的参考.给出了选择泥沙输运模型应遵循的原则,模型输入及率定方面存在的问题及改进的途径.探讨了现有水动力学/泥沙输运模型在处理复杂湍流,泥沙携带,流动与输沙耦合,非均匀泥沙,离散和扩散系数,河岸来沙处理等方面的局限性及改进的方向.最后,对基于多相流思想的泥沙输运模型及其它一些交叉性问题作了评述与展望.     

Fast and facile synthesis of silica coated silver nanoparticles by microwave irradiation

A novel, fast and facile microwave technique has been developed for preparing monodispersed silica coated silver (Ag@SiO(2)) nanoparticles. Without using any other surface coupling agents such as 3-aminopropyltrimethoxysilane (APS) or polymer such as polyvinyl pyrrolidone (PVP), Ag@SiO(2) nanoparticles could be easily prepared by microwave irradiation of a mixture of colloidal silver nanoparticles, tetraethoxysilane (TEOS) and catalyst for only 2 min. The thickness of silica shell could be conveniently controlled in the range of few nanometers (nm) to 80 nm by changing the concentration of TEOS. Transmission electron microscopy (TEM) and UV-visible spectroscopy were employed to characterize the morphology and optical properties of the prepared Ag@SiO(2) nanoparticles, respectively. The prepared Ag@SiO(2) nanoparticles exhibited a change in surface plasmon absorption depending on the silica thickness. Compared to the conventional techniques based on St?ber method, which need 4-24 h for silica coating of Ag nanoparticles, this new technique is capable of synthesizing monodispersed, uniform and single core containing Ag@SiO(2) nanoparticles within very short reaction time. In addition, straightforward surface functionalization of the prepared Ag@SiO(2) nanoparticles with desired functional groups was performed to make the particles useful for many applications. The components of surface functionalized nanoparticles were examined by Fourier transform infrared (FT-IR) spectroscopy, zeta potential measurements and X-ray photoelectron spectroscopy (XPS).     

同步荧光光谱法测定石油中的晕苯

用苯做溶剂对原油样品进行逐级稀释,恒波长同步荧光法对原油样品中晕苯进行定性、定量分析。分别从溶剂选择、波长差、狭缝宽度等参数对其测定的光谱条件进行优化。实验结果表明：用苯为溶剂、Δλ=6nm,狭缝宽度为2.5nm,为原油样品中晕苯的最佳测试条件。所建立方法测定晕苯的线性范围为0.5—100μg/mL,校准曲线的相关系数r大于0.99,相对标准偏差小于3%（n=5）。该法分析快速、准确,对石化工厂中对原油样品中晕苯的快速检测具有一定的应用价值。     

Interpreting early land management through compound specific stable isotope analyses of archaeological soils

Compound specific stable isotope analyses of managed soils using isotope ratio mass spectrometry have been undertaken as a means of determining early land use practices. delta (15)N amino acid signals demonstrate differences between manured grassland, unmanured grassland and continuous cereal cultivation under long-term experimental land use control conditions, with delta (15)N in hydrophobic amino acids providing the most distinctive signals. Analysis of early modern/medieval and of Bronze age anthropogenic soils from Orkney demonstrates that such signals are retained in archaeological contexts. delta (13)C analyses of n- alkanoic acid components of the fossil, Bronze Age, anthropogenic soils suggest a major terrestrial input to these soils, with uniform composition of formation materials. Surficial soils demonstrate the assimilation of isotopically lighter carbon, providing a means of assessing the mobility of the n- alkanoic acids within soils and sediments. Copyright 1999 John Wiley & Sons, Ltd.     

Non-Volatile Threshold Adaptive Transistors with Embedded RRAM

We propose a novel nonvolatile threshold adaptive transistor （TAT） for neuromorphic circuits. The threshold adaptive transistor is achieved by embedding a resistive random-access memory （RRAM） material stack between the gate electrode and gate dielectric. During operation, the embedded RRAM device is kept at a high resistance state, which makes it act as a nonvolatile capacitor. The threshold could be nonlinearly adjusted by the voltage pulses applied on the gate of the transistor. We quantitatively estimate the range of the capacitance variation of the RRAM device. The threshold voltage of the TAT is simulated and shows expected variation. The simulated output of an inverter using a TAT shows a nonlinear adaptive behavior.     

Uniaxial exchange flows of two Bingham fluids in a cylindrical duct

Buoyancy driven flows of two Bingham fluids in an inclined ductare considered, providing a simplified model for many oilfieldcementing processes. The flows studied are near-uniaxial andstratified, with the heavy fluid moving down the incline, displacingthe lighter fluid upwards. Existence and uniqueness resultsare obtained for quite general flows and for those which satisfyan axial flow rate constraint. Parametric dependence of thesolutions on the axial pressure gradient is studied. Flows whichsatisfy a zero net axial flow constraint result from an axialpressure gradient which minimizes the viscous dissipation, butnot the plastic dissipation. A regularization method is usedto compute solutions to these problems for (more or less) arbitraryfluid-fluid interfaces and duct-cross sections. Examples relatedto a number of practical applications are presented.