Brominated poly(isobutylene‐co‐para‐methylstyrene) (BIMS)‐clay nanocomposites: Synthesis and characterization

In this work, preparation and properties of different nanoclays modified by organic amines (octadecyl amine, a primary amine, and hexadecyltrimethylammonium bromide, a tertiary amine) and brominated polyisobutylene‐co‐paramethylstyrene (BIMS)‐clay nanocomposites are reported. The clays and the rubber nanocomposites have been characterized with the help of Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The X‐ray diffraction peaks observed in the range of 3 °–10 ° for the modified clays disappear in the rubber nanocomposites. TEM photographs show predominantly exfoliation of the clays in the range of 12 ± 4 nm in the BIMS. In the FTIR spectra of the nanocomposites, there are common peaks of virgin rubber as well as those of the clays. Excellent improvement in mechanical properties like tensile strength, elongation at break, and modulus is observed on incorporation of the nanoclays in the BIMS. Structure‐property correlation in the above nanocomposites is attempted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4489–4502, 2004     

Studies on crosslinking of EPDM-PE blends by thermoanalytical techniques

The effect of blend ratio and peroxide concentration on crosslinking characteristics of EPDM-PE blends were studied by Differential Scanning Calorimetry, Brabender plasticorder and Rheometer. Crosslinking of EPDM-PE blends follows first order reaction kinetics. The curing exotherm increases but activation energy decreases with increase in EPDM content in the blends. The same however increases with the increase in concentration of DCP upto a certain level, while the activation energy is almost independent of peroxide concentration. The cure rate increases whereas optimum cure time and energy consumption for curing decrease with increase in the EPDM-PE ratio. A method for determination of crosslinking efficiency in the case of blend systems was developed from high temperature modulus to predict the properties and the curing behaviour of the blends.

---

Zusammenfassung Mittels DSC, Brabender Plasticorder und Rheometer wurde der Einfluß von Mischungsverhältnis und Peroxidkonzentration auf den Vernetzungsverlauf von EPDM-PE-Gemischen untersucht. Die Vernetzung von EPDM-PE-Gemischen verläuft nach einer Reaktion erster Ordnung. Je höher der Anteil von EPDM im Gemisch, um so exothermer ist die Vernetzung und um so kleiner ist die dazugehörige Aktivierungsenergie. Mit dem Anwachsen der DCP-Konzentration bis zu einem gewissen Niveau wächst der exotherme Charakter, während die Aktivierungsenergie fast unabhängig von der Peroxidkonzentration ist. Mit dem Anstieg des EPDM/PE-Verhältnisses wächst die vernetzungsgeschwindigkeit, während die optimale Vernetzungszeit und der Energieverbrauch für die Vernetzung sinken. Es wurde ein Verfahren zur Bestimmung der Vernetzungseffizienz bei Mischsystemen entwickelt, um Eigenschaften und Vernetzungsverhalten von Gemischen voraussagen zu können.

     

Silver (I)-promoted asymmetric halohydrin reaction of chiral N-enoyl-2-oxazolidinones: scope and limitations

The halohydrin reaction of chiral N-enoyl-2-oxazolidinones 1 by halogen (Br₂/I₂) and water were efficiently carried out in aqueous organic solvent promoted by silver(I) with high anti- and regioselectivity and moderate to good diastereoselectivities. The alkenoyl, cinnamoyl and electron-deficient cinnamoyl substrates smoothly underwent bromohydrin reaction in aqueous acetone but no iodohydrin reaction, where as electron-rich cinnamoyl substrates preferred to undergo iodohydrin reaction in aqueous acetone with moderate diastereoselectivity and enhanced diastereoselectivity was observed in aqueous THF.     

Degradation of rocket insulator at high temperature

The degradation of a rocket insulator compound based on ethylene propylene diene rubber (EPDM) containing asbestor, cork and iron oxide (Fe₂O₃) as fillers has been studied at high temperature (up to 600°) by using differential thermal analysis (DTA) and thermogravimetry (TG). The changes in physical properties on high-temperature aging are also reported. EPDM gum vulcanizates involving different types of diene, namely ethylidene norbornene (ENB), dicyclopentadiene (DCPD) and 1,4-hexadiene (HD), were used. In each case, the kinetic parameters for degradation have been evaluated. From these data, the lifetime of the rocket insulator compound has been found.

---

Zusammenfassung Die Zersetzung einer Raketenisolator-Verbindung auf Äthylen-Propylen-Dien-Gummibasis (EPDM) mit Asbest, Kork und Eisenoxid (Fe₂O₃) als Füllstoffe wurden bei hohen Temperaturen (bis 600°) mittels Differentialthermalanalyse (DTA) und Thermogravimetrie (TG) untersucht. Die bei Hochtemperaturen eintretenden Veränderungen der physikalischen Eigenschaften sind ebenfalls angegeben. Verschiedene Typen von Dienen, nämlich Äthyliden-norbornen (ENB), Dicyclopentadien (DCPD) und 1,4-Hexadien (HD) enthaltenden EPDM-Gummivulkanisate waren Gegenstand der Untersuchung. In allen Fällen wurden die kinetischen Parameter der Zersetzung ermittelt. Aus diesen Daten wurde die Lebensdauer der Raketenisolator-Verbindung bestimmt.

---

600° (), , . , . , , 1,4- . . .

---

---

The authors are grateful to the Indian Space Research Organization for funding, and acknowledge the help and suggestions from Mr. T. S. Ram and Mr. Baby John, R.P.P., V.S.S.C., Trivandrum. The authors are also grateful to Prof. S. K. De, Rubber Technology Centre, and Prof. R. Ghosh, Chemistry Department, I.I.T., Kharagpur.

---

The authors thank Mr. Asutosh Ghosh, Indian Association for the Cultivation of Science, for experimental assistance.     

Probing the Local Magnetic Structure of the [FeIII(Tp)(CN)3]− Building Block Via Solid-State NMR Spectroscopy,Polarized Neutron Diffraction,and First-Principle Calculations

The local magnetic structure in the [Fe^III(Tp)(CN)₃]⁻ building block was investigated by combining paramagnetic Nuclear Magnetic Resonance (pNMR) spectroscopy and polarized neutron diffraction (PND) with first-principle calculations. The use of the pNMR and PND experimental techniques revealed the extension of spin-density from the metal to the ligands, as well as the different spin mechanisms that take place in the cyanido ligands: Spin-polarization on the carbon atoms and spin-delocalization on the nitrogen atoms. The results of our combined density functional theory (DFT) and multireference calculations were found in good agreement with the PND results and the experimental NMR chemical shifts. Moreover, the ab-initio calculations allowed us to connect the experimental spin-density map characterized by PND and the suggested distribution of the spin-density on the ligands observed by NMR spectroscopy. Interestingly, significant differences were observed between the pseudo-contact contributions of the chemical shifts obtained by theoretical calculations and the values derived from NMR spectroscopy using a simple point-dipole model. These discrepancies underline the limitation of the point-dipole model and the need for more elaborate approaches to break down the experimental pNMR chemical shifts into contact and pseudo-contact contributions.     

Direct meta-C−H Perfluoroalkenylation of Arenes Enabled by a Cleavable Pyrimidine-Based Template

The development of efficient and mild methods for the synthesis of organofluorine compounds is of foremost interest in various fields of chemistry. A direct pyrimidine-based selective meta-C−H perfluoroalkenylation of arenes involving several commercially available perfluoroolefins is described. The synthetic versatility of the protocol is demonstrated by an extensive substrate scope including different benzylsulfonyl, alkylarene and phenylacetic acid scaffolds. The generality of this methodology including the meta-C−H perfluoroalkenylation of Ibuprofen, the facile cleavage of the directing group and gram-scale reactions are presented.     

Towards a queueing-based framework for in-network function computation

We seek to develop network algorithms for function computation in sensor networks. Specifically, we want dynamic joint aggregation, routing, and scheduling algorithms that have analytically provable performance benefits due to in-network computation as compared to simple data forwarding. To this end, we define a class of functions, the Fully-Multiplexible functions, which includes several functions such as parity, MAX, and kth-order statistics. For such functions we characterize the maximum achievable refresh rate of the network in terms of an underlying graph primitive, the min-mincut. In acyclic wireline networks we show that the maximum refresh rate is achievable by a simple algorithm that is dynamic, distributed, and only dependent on local information. In the case of wireless networks we provide a MaxWeight-like algorithm with dynamic flow-splitting, which is shown to be throughput-optimal.