The effects of cationic and zwitterionic micelles on the keto-enol interconversion of 2-phenylacetylfuran and 2-phenylacetylthiophene

The presence of micelles from cationic and zwitterionic surfactants increases the apparent acidity of either the keto and the enol forms of 2-phenylacetylfuran (2PAF) and 2-phenylacetylthiophene (2PAT). This effect can be attributed to the affinity of the surfactant micelles for the enolate of the two substrates. Although the equilibrium constants for keto-enol tautomerism of 2PAF and 2PAT, K_T=[enol]/[ketone]=pK_a^KH−pK_a^EH, do not change much, the presence of micelles provides an efficient method for producing appreciable quantities of the enolates under mild experimental conditions and in aqueous solutions. The obtained rate-profiles for the ketonisation reactions and the consistency of the kinetic rate constants over a wide range of ‘pH’ in several overlapping buffers indicate that the pH of the aqueous pseudophase (but not that at the micellar surface) can be controlled by buffers. Moreover, the increase of the acidity and the decrease of the ‘water’ rate of ketonisation of the enols of 2PAF and 2PAT upon addition of surfactants allow the uncovery of a metal ion catalysed pathway that cannot be observed in absence of surfactants.     

Synthesis and aggregation behaviour of a new sultaine surfactant

The aggregation properties of a new sultaine surfactant have been studied in buffered aqueous solution at pH 7.4 under controlled condition of osmolarity. Spontaneously formed sultaine vesicles with a mean diameter of about 1 μm can be observed by optical microscopy. The phase behaviour of the surfactant has been investigated by differential scanning calorimetry (DSC) and Nile Red fluorescence. Two critical vesicular concentrations (CVC(1) and CVC(2)) have been fluorimetrically measured, by using pyrene and Nile Red as the fluorescent probes. The two populations of vesicles behave differently as a consequence of their size. The stability of extruded large unilamellar vesicles (LUV) formed slightly above the CVC(1) has been evaluated in the temperature range 25-75°C by following the rate of spontaneous release of entrapped 5(6)-carboxyfluorescein (CF). The stability of the same vesicles at 70°C has also been investigated under osmotic stress obtained by adding NaCl or sucrose to the bulk solution. At a sultaine concentration above the CVC(2) LUV tend to associate and form stable larger closely packed aggregates as suggested by Dynamic Laser Light Scattering and rheological measurements.     

An investigation of a possible dependence of brewer number 67''s total-ozone measurements on some atmospheric parameters, together with a presentation of a peculiar synoptic ozone case at Rome

Summary Brewer total ozone data (January–December 1992) measured at the Physics Department, Rome University ?La Sapienza? (41.9° North, 12.5° East) are analysed for dependence on Brewer internal temperature and some meteorological parameters. Non-parametric correlation analysis reveals the independence of total ozone from the internal Brewer temperature. Attention is focused on a peculiar case to show, by means of vertical wind velocity profile, the possible effects of lower stratospheric vertical advection on ozone fluctuations.     

EXAFS characterization of dendrimer-Pt nanocomposites used for the preparation of Pt/gamma-Al2O3 catalysts

Pt/gamma-Al2O3 catalysts were prepared using hydroxyl-terminated generation four (G4OH) PAMAM dendrimers as the templating agents and the various steps of the preparation process were monitored by extended X-ray absorption fine structure (EXAFS) spectroscopy. The EXAFS results indicate that, upon hydrolysis, chlorine ligands in the H(2)PtCl(6) and K(2)PtCl(4) precursors were partially replaced by aquo ligands to form [PtCl3(H2O)3]+ and [PtCl2(H2O)2] species, respectively. The results further suggest that, after interaction of such species with the dendrimer molecules, chlorine ligands from the first coordination shell of Pt were replaced by nitrogen atoms from the dendrimer interior, indicating that complexation took place. This process was accompanied by a substantial transfer of electron density from the dendrimer to platinum, indicating that the dendrimer plays the role of a ligand. Following treatment of the H(2)PtCl(6)/G4OH and K(2)PtCl(4)/G4OH complexes with NaBH4, no substantial changes were observed in the electronic or coordination environment of platinum, indicating that metal nanoparticles were not formed during this step under our experimental conditions. However, when the reduction treatment was performed with H2, the formation of extremely small platinum clusters, incorporating no more than four Pt atoms was observed. The nuclearity of these clusters depends on the length of the hydrogen treatment. These Pt species remained strongly bonded to the dendrimer. Formation of larger platinum nanoparticles, with an average diameter of approximately 10 A, was finally observed after the deposition and drying of the H(2)PtCl(6)/G4OH nanocomposites on a gamma-Al(2)O(3) surface, suggesting that the formation of such nanoparticles may be related to the collapse of the dendrimer structure. The platinum nanoparticles formed appear to have high mobility because subsequent thermal treatment in O2/H2, used to remove the dendrimer component, led to further sintering.     

Solvent effects on the rate of the keto-enol interconversion of 2-nitrocyclohexanone

The rates of tautomerization of 2-nitrocyclohexanone (2-NCH) have been measured spectrophotometrically at 25.0 +/- 0.1 degrees C in several organic aprotic solvents and their binary mixtures. In cyclohexane the reaction is effectively catalyzed by bases and inhibited by acids while the so-called "spontaneous reaction" appears essentially due to autocatalysis. Apparent second order rate constants (k(app)(B)) for the reaction catalyzed by triethylamine (TEA) and pyridine (Pyr) have been obtained. From the experimental k(app)(B) values rate constants for the enolization (k(1)(B)) and ketonization (k(-1)(B)) reactions have been calculated. A Kamlet-Taft type linear solvation energy relationship (LSER) adequately accounts for the observed solvent effects. Activation parameters for both reactions show that solvent effects are mainly entropic in origin and that there is a shift of the transition state from a ketone-like to an enol-like structure on passing from less to more polar solvents.     

Ionization and tautomerization of 2-nitrocyclohexanone in aqueous solution

The keto-enol tautomerism of 2-nitrocyclohexanone (2-NCH) was studied in aqueous solution under different experimental conditions. Ketonization rate constants were measured spectrophotometrically at 25 degrees C at an ionic strength of 0.4 mol dm-3 (NaCl) in diluted hydrochloric acid, in diluted sodium hydroxide, and in several buffers by using NaHSO3 as the scavenger of the keto form. A value of pK(a)(EH) = 4.78 for the enol form was obtained from the rate-pH profile of the reaction. A value of pK(a)(KH) = 5.97 for the keto form was directly obtained from the UV-vis spectra of 2-NCH recorded at different pHs. The equilibrium constant for the keto-enol tautomerism, pK(T) = -log([enol]/[ketone]) = 1.19, was obtained by combining the two pKa values (pK(T) = pK(a)(KH) - pK(a)(EH)). A comparison of these results with the corresponding values (Keefe, J. R.; Kresge, A. J. In The Chemistry of Enols; Rappoport, Z., Ed.; Wiley & Sons: New York, 1990; pp 399-480) for cyclohexanone shows the dramatic effects of an alpha-nitro substituent on the keto-enol acidities and the tautomerization constant of alicyclic ketones. Rates and equilibria were discussed in the light of the Br?nsted equation, the principle of nonperfect synchronization, and the Marcus theory. It turns out that, on passing from nitroalkanes to nitroketones, the resonance contribution to pKa and deprotonation rate decreases, being overwhelmed by steric and inductive effects.     

Improved CO oxidation activity in the presence and absence of hydrogen over cluster-derived PtFe/SiO2 catalysts

The catalytic performance of cluster-derived PtFe/SiO(2) bimetallic catalysts for the oxidation of CO has been examined in the absence and presence of H(2) (PROX) and compared to that of Pt/SiO(2). PtFe(2)/SiO(2) and Pt(5)Fe(2)/SiO(2) samples were prepared from PtFe(2)(COD)(CO)(8) and Pt(5)Fe(2)(COD)(2)(CO)(12) organometallic cluster precursors, respectively. FTIR data indicate that both clusters can be deposited intact on the SiO(2) support. The clusters remained weakly bonded to the SiO(2) surface and could be extracted with CH(2)Cl(2) without any significant changes in their structure. Subsequent heating in H(2) led to complete decarbonylation of the supported clusters at approximately 350 degrees C and the formation of Pt-Fe nanoparticles with sizes in the 1-2 nm range, as indicated by HRTEM imaging. A few larger nanoparticles enriched in Pt were also observed, indicating that a small fraction of the deposited clusters were segregated to the individual components following the hydrogen treatment. A higher degree of metal dispersion and more homogeneous mixing of the two metals were observed during HRTEM/XEDS analysis with the cluster-derived samples, as compared to a PtFe/SiO(2) catalyst prepared through a conventional impregnation route. Furthermore, the cluster-derived PtFe(2)/SiO(2) and Pt(5)Fe(2)/SiO(2) samples were more active than Pt/SiO(2) and the conventionally prepared PtFe/SiO(2) sample for the oxidation of CO in air. However, substantial deactivation was also observed, indicating that the properties of the Pt-Fe bimetallic sites in the cluster-derived samples were altered by exposure to the reactants. The Pt(5)Fe(2)/SiO(2) sample was also more active than Pt/SiO(2) for PROX with a selectivity of approximately 92% at 50 degrees C. In this case, the deactivation with time on stream was substantially slower, indicating that the highly reducing environment under the PROX conditions helps maintain the properties of the active Pt-Fe bimetallic sites.     

An Effective Simulation of Aqueous Micellar Aggregates by Computational Models

Summary We have computationally studied the interaction modes, localization and orientation of a benzene (Bz) molecule on the surface of micelles formed by cetyltrimethylammonium salts CTAX. Experimental ¹H-NMR data on complexation shifts induced by Bz on the polar head hydrogens and on the adjacent methylene hydrogens of CTAX have been interpreted using a computational approach that combines an automatic molecular docking procedure with a calculation module that accounts for NMR complexation shifts due to ring current diamagnetic anisotropy. Three different models were used to reduce the complexity of the micellar system. Computational results, in good agreement with available experimental data, point to a preferential localization of the Bz molecule along the CTAX alkyl tail, about 3.9 Å away from the charged nitrogen. The Bz molecular plane is predicted perpendicular to the C-H bonds of the alkyl tail. The good results obtained with the simplest model suggest that it could be used to study more complex systems involving surfactants endowed with molecular recognition or catalytic abilities.     

Applicability of the polysulphone horizontal calibration to differently inclined dosimeters

Polysulphone (PS) dosimetry has been a widely used technique for more than 30 years to quantify the erythemally effective UV dose received by anatomic sites (personal exposure). The calibration of PS dosimeters is an important issue as their spectral response is different from the erythemal action spectrum. It is performed exposing a set of PS dosimeters on a horizontal plane and measuring the UV doses received by dosimeters using calibrated spectroradiometers or radiometers. In this study, data collected during PS field campaigns (from 2004 to 2006), using horizontal and differently inclined dosimeters, were analyzed to provide some considerations on the transfer of the horizontal calibration to differently inclined dosimeters, as anatomic sites usually are. The role of sky conditions, of the angle of incidence between the sun and the normal to the slope, and of the type of surrounding surface on the calibration were investigated. It was concluded that PS horizontal calibrations apply to differently inclined dosimeters for incidence angles up to approximately 70° and for surfaces excluding ones with high albedo. Caution should be used in the application of horizontal calibrations for cases of high-incidence angle and/or high albedo surfaces.