Nuclear Quadrupole Coupling Constants of Chlorine and Microwave Spectrum, Structure, and ab Initio Calculation of 1-Chloro-1,1,2-trifluoroethane

The microwave spectrum of the ³⁵Cl and ³⁷Cl isotopic species of 1-chloro-1,1,2-trifluoroethane (HCFC-133b) has been investigated in the frequency region 10 to 50 GHz using a Stark modulation microwave spectrometer. A pulsed jet Fourier transform microwave spectrometer was also used for the measurement of hyperfine splittings. A least-squares analysis of the observed b-type Q- and R-branch transition frequencies gave rotational and centrifugal distortion constants and components of the chlorine nuclear quadrupole coupling constant tensors in the principal axes system as follows: A=4625.161 (3) MHz, B=2004.127 (2) MHz, C=1875.813 (2) MHz, Δ_J=0.144 (9) kHz, Δ_JK=1.0748 (8) kHz, Δ_K=1.57 (1) kHz, δ_J=0.01376 (4) kHz, δ_K=−0.146 (4) kHz, χ_aa=−57.958 (10) MHz, χ_bb=21.231 (11) MHz, and χ_cc=36.727 (11) MHz for ³⁵ClCF₂CH₂F species, and A=4607.684 (6) MHz, B=1960.565 (2) MHz, C=1834.823 (2) MHz, Δ_J=0.106 (7) kHz, Δ_JK=1.022 (3) kHz, Δ_K=1.48 (1) kHz, δ_J=0.0142 (2) kHz, δ_K=−0.18 (2) kHz, χ_aa=−46.268 (11) MHz, χ_bb=17.319 (13) MHz, and χ_cc=28.950 (13) MHz for ³⁷ClCF₂CH₂F species. The structural parameters are calculated from the observed six rotational constants by assuming the partial structure of ab initio calculation. The electronic properties of the C-Cl bond are evaluated from the observed nuclear quadrupole constants of chlorine. These molecular properties are compared with those of other related molecules.     

Comments on the bremsstrahlung cross section formula using exact electron-distorted wave functions

Rozics and Johnson's formula is examined and its inconsistency is pointed out.     

A Monte Carlo method for high dimensional integration

Summary A new method for the numerical integration of very high dimensional functions is introduced and implemented based on the Metropolis' Monte Carlo algorithm. The logarithm of the high dimensional integral is reduced to a 1-dimensional integration of a certain statistical function with respect to a scale parameter over the range of the unit interval. The improvement in accuracy is found to be substantial comparing to the conventional crude Monte Carlo integration. Several numerical demonstrations are made, and variability of the estimates are shown.     

Catalytic asymmetric intramolecular hydroamination of aminoalkenes

Asymmetric intramolecular cyclization of aminoalkenes was catalyzed by a catalytic amount of n-butyllithium, diisopropylamine, and a newly designed chiral bisoxazoline in toluene to produce kinetically controlled exo-cyclized amines with up to 91% ee quantitatively.     

A Monte Carlo method for an objective Bayesian procedure

This paper describes a method for an objective selection of the optimal prior distribution, or for adjusting its hyper-parameter, among the competing priors for a variety of Bayesian models. In order to implement this method, the integration of very high dimensional functions is required to get the normalizing constants of the posterior and even of the prior distribution. The logarithm of the high dimensional integral is reduced to the one-dimensional integration of a cerain function with respect to the scalar parameter over the range of the unit interval. Having decided the prior, the Bayes estimate or the posterior mean is used mainly here in addition to the posterior mode. All of these are based on the simulation of Gibbs distributions such as Metropolis' Monte Carlo algorithm. The improvement of the integration's accuracy is substantial in comparison with the conventional crude Monte Carlo integration. In the present method, we have essentially no practical restrictions in modeling the prior and the likelihood. Illustrative artificial data of the lattice system are given to show the practicability of the present procedure.     

Likelihood estimation of soft-core interaction potentials for Gibbsian point patterns

The likelihood method is developed for the analysis of socalled regular point patterns. Approximating the normalizing factor of Gibbs canonical distribution, we simultaneously estimate two parameters, one for the scale and the other which measures the softness (or hardness), of repulsive interactions between points. The approximations are useful up to a considerably high density. Some real data are analyzed to illustrate the utility of the parameters for characterizing the regular point pattern.     

Gamma-ray polymerization of phospholipids having diene or triene groups as liposomes

Small unilamellar liposomes were prepared in an aqueous medium by the sonication of phospholipids containing diene or triene groups in their hydrocarbon acyl chains. These liposomes were polymerized by gamma-ray irradiation. Conversion of polymerization was successively followed by UV spectrometry. Diene-type lipid liposomes were revealed for which a gamma-ray dose of 0.8 Mrad was required for complete polymerization and which were polymerized more easily than triene-type lipid liposomes. Triene-type lipids required 2.3 Mrad gamma ray to polymerize them completely. Contrary to UV-irradiation polymerization, there was no concentration dependence on the polymerization. Structure of the polymerized liposomes were confirmed by electron microscopy as small unilamellar liposomes. Study on the leakage of fluorescein from inner aqueous phase of the polymerized liposomes revealed that polymerized triene-type liposomes were relatively more stable than the polymerized diene-type liposomes.     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Adsorption characteristics of radionuclides on nickel hexacyanoferrate(ii)

The composition of nickel hexacyanoferrate(II) complexes depends on the ratios of sodium hexacyanoferrate(II) and nickel nitrate solutions mixed. The adsorption behavior of nickel hexacyanoferrate(II) is described; acid treatment of Ni₂Fe(CN)₆ accelerates the adsorption rate of cesium, but does not increase the adsorption capacity. The Ni—Cs exchange ratios of Ni₂Fe(CN)₆ are discussed. In concentrated salt solutions, the distribution coefficients of ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn. ¹³⁷Cs, ⁹⁵Zr and ¹⁴⁴Ce are determined together with those of ⁸⁵Sr and ¹⁰⁶Ru. A simple determination of ¹³⁷Cs in sea water containing ⁵⁹Fe, ⁶⁰Co, ⁶⁵Zn, ⁹⁵Zr, ¹⁴⁴Ce, ⁸⁵Sr and ¹⁰⁶Ru is described.