Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Effects of ground-state correlations on 2νββ decay rates and limitations of the QRPA approach

Half-lives of the 2νββ decay are calculated in the proton-neutron QRPA for⁷⁶Ge,⁸²Se,¹⁰⁰Mo,^128,130Te,¹³⁶Xe and¹⁵⁰Nd. The strength of the particle-particle interaction, which plays a decisive role for a reliable evaluation of the half-lives, is determined from a QRPA calculation of singleβ ⁺ decays. The 2ν decay rates calculated with the interaction strength fitted in this way are strongly suppressed and found to be consistent with the existing experimental data. Effects of the ground-state correlations on the suppression are investigated. On the other hand, the present calculation indicates limitations of the QRPA approach.     

Studies on the syntheses of heterocyclic compounds. CLXXIV. An approach to the synthesis of oxyacanthine and berbamine

Schotten-Baumann reaction of the amine (X) with 4-benzyloxy-3,4′-oxydiphenylacetyl chloride (XI) gave two amides, (XIIa) and (XIIb), which were cyclized to give the corresponding 3,4-dihydroisoquinolines, respectively. Methylation of the above 3,4-dihydro-isoquinolines, followed by hydrolysis, afforded the compounds having the same composition as berbamine (Ia) and oxyacanthine (Ib), whose structures are under examination.     

Towards the selective formation of specific isomers of fullerenes: T - and p-dependence in the yield of various isomers of fullerenes C60–C84

Systematic fractional change in the yield of various isomers of fullerenes was revealed to strongly depend on temperature of a buffer gas. A new kinetic consideration is proposed for understanding the observed temperature- and pressure-dependence of yield of fullerenes. The model consists of three competitive reactions in consideration of plausible behaviors of a precursor, (1) decomposition into smaller fragments, (2) isomerization leading to formation of a stable fullerene cage, and (3) growth into a larger carbon cluster. Arrhenius activation energy of formation of stable fullerenes was determined to be 0.8 eV for both C₆₀ and C₇₀, while a higher energy of 2.0?3.3 eV for seven different isomers of higher fullerenes ranging from C₇₆ to C₈₄. Correlation in the activation energy is noted for a series of higher fullerenes with different sizes, suggesting the existence of a specific precursor in their formation processes.     

Initial mode of radical pair formation in n-hydrocarbons irradiated at 1.5 and 4.2 K

The ESR spectra of X-irradiated (at 1.5 and 4.2 K) single crystals of n-decane-d₂₂, n-decane-h₂₂ and their mixtures have been measured at 1.5 and 4.2 K. It is concluded that almost all alkyl radicals are inherently formed in pairs in a fairly random fashion and that the spacial distribution of the radicals depends on the irradiation temperatures. In the crystal of n-decane-d₂₂, a 1,3-carbon intrachain radical pair is identified together with a number of very close interchain pairs which are formed between almost all kinds of the first neighboring chains. The crystal of n-decane-h₂₂ gives considerably larger spacial distribution of radicals, indicating a remarkable mass effect on the radical pair formation.     

Determination of urea by ion chromatography with an immobilized urease reactor

An immobilized urease reactor can be used with ion chromatography for the simultaneous determination of urea, and sodium, potassium and ammonium ions. The conversion of urea to ammonium ion was found to be 76.5%. The calibration graph for urea was linear over the range 1 × 10^?5?1 × 10^?3 M (RSD 3%). The method was applied to human urine and a chemical fertilizer.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Improving the properties of the proton exchange membranes by introducing α-methylstyrene in the pre-irradiation induced graft polymerization

New proton exchange membranes (PEMs) were prepared by pre-irradiation induced grafting of α-methylstyrene (AMS)/styrene (STY)/divinylbenzene (DVB) into the crosslinked polytetrafluoroethylene (RX-PTFE) films and successively sulfonated. The new PEMs showed the improved glass transition temperature and chemical stability as compared with the PEMs prepared by pre-irradiation induced grafting of STY/DVB. The balance of the cost, grafting kinetic, thermal properties and the properties of the resulted proton exchange membrane is the key point of this work.     

Magnetic properties of Pm in PrNi

A magnetic property of Pm as an impurity in PrNi single crystal was investigated by means of the low-temperature nuclear orientation of^143,144Pm. The angular distribution of -ray anisotropies revealed that the direction of hyperfine field experienced by the nuclei lie in the (a, c) plane andmade an angle of 60° (5) or 240° (5) with respect to the crystallinec-axis. From the temperature dependence of the anisotropies the strength of the hyperfine field of Pm in PrNi was deduced to be 185(22)T. The hyperfine field of Co at the Ni site of PrNi was found to be less than 4T.