Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

(Z)-3-p-tolylsulfinylacrylonitrile as a chiral dienophile: diels-alder reactions with furan and acyclic dienes

The behavior of (Z)-3-p-tolylsulfinylacrylonitrile (1) as a chiral dienophile has been evaluated from its reactions with furan and acyclic dienes. Electrostatic interactions of the cyano group with the sulfinyl one restrict the conformational mobility around the C-S bond, thus controlling the pi-facial selectivity, which is almost complete in all cases, the approach of the diene from the less-hindered face of the dienophile (that bearing the lone electron pair) in the predominant rotamer being the favored one. The regioselectivity is also completely controlled by the cyano group. Additionally, the reactivity of compound 1 as well as its endo-selectivity are both higher than those observed for the corresponding (Z)-3-sulfinylacrylates, thus proving the potential of sulfinylnitriles as chiral dienophiles.     

Design and Synthesis of 3‐Aryl‐5‐Alicylic‐[1,2,4]‐oxadiazoles as Novel Platelet Aggregation Inhibitors

A series of 4‐[2‐(alicyclic‐[1,2,4]oxadiazol‐3‐yl)phenoxy]‐butyric acids were synthesized from N‐hydroxy‐2‐isopropoxy benzamidine in 4 steps with good yields. These [1,2,4]oxadiazoles are novel platelet aggregation inhibitors preventing human platelet aggregation induced by thromboxane derivative U44,619 and adenosine diphosphate. A structure‐activity‐relationship study revealed that the potency for these 5‐oxadiazoles increases with the increase in the ring size of the alicylic rings. Derivative 8f may be useful as a template for the design of more potent anti‐platelet agents.     

Spin-singlet clusters in the ladder compound NaV2O5

The space group of alpha(')-NaV2O5 turns below T(c) = 34 K from Pmmn with all V sites equivalent, into Fmm2 with three independent vanadium sites per layer. This is incompatible with models of charge ordering into V4+ and V5+. Our structure determination indicates that the phase transition consists of a charge ordering with three distinct valence states, formally V4+, V4.5+, and V5+. The singlet formation is not associated with dimerization on the spin ladder, but with the formation of spin clusters. Finally, we ascribe the quadrupling of the c axis to the large polarizability of the V2O5 skeleton.     

Dependence of pulser driving responses on electrical and motional characteristics of NDE ultrasonic probes

Acoustic performance in ultrasonic transmitters can be improved by means of a suitable electrical driving response and matching/tuning networks. It is important to predict this electrical response, but doing so is not easy because it departs notably from the nominal pattern with the loading probes. In practice, the analysis of HV pulser spikes in NDE applications requires fairly complex models in the transient regime and, in addition, non-linear problems could arise, especially in the case of tuned transmitters. In this paper, the most relevant influences of loading characteristics of NDT ultrasonic probes on the pulser electrical driving responses are evaluated in time and frequency domains. Conventional pulse generators and typical NDE pulsers are considered. Driving responses are analysed across commercial ultrasonic probes and, alternatively, across similar purely electrical loads. Distinct influences on pulser responses from electrical and motional sections of the probes are identified. All these aspects are studied on the basis of experimental and computer results.     

Synthesis of highly oriented TiNx coatings by free-electron laser processing of titanium in nitrogen gas

Titanium substrates were irradiated in pure nitrogen gas by means of a free-electron laser. The treatment resulted in the formation of δ-TiN_x coatings, with surface stoichiometry x≈1 and thickness of about 15 μm. Under specific experimental conditions the nitride phase had a remarkable crystallographic texture with the δ-TiN_x(200) planes parallel to the irradiated surface, and well aligned dendrites growing normal to the surface. The mechanism of the dendritic alignment and the origin of the texture correlate with the existence of a solidification front starting at the surface, which is very peculiar for laser surface treatments. This phenomenon is explained with the help of numerical simulations. PACS 61.80.Ba; 81.15.Fg; 81.65.Lp     

Synthesis and optical and electrochemical properties of copolymers consisting of 9,9‐dihexylfluorene and aromatic triazole chromophores

Aromatic triazole chromophores were incorporated into polyfluorene in an attempt to increase electron affinity, to promote emission efficiency, and to diminish excimer formation. Poly(9,9‐dihexylfluorene) ( P1 ) and new copolymers with aromatic triazoles ( P2 – P4 ) were prepared by Suzuki coupling polymerization. In P2 , the aromatic triazole (3.8 mol %) was attached exclusively as terminal groups, whereas P3 and P4 were main‐chain copolymers containing 3.9 and 10.3 mol % aromatic triazole chromophores, respectively. The copolymers were soluble in common organic solvents and showed high decomposition temperatures (437–458 °C). The twisted structure between the triazole and fluorene increased the emission efficiency and effectively prevented excimer formation in P2 – P4 . After the introduction of the triazole units, the absorption spectra showed a blueshift (from 388 to 381 nm in chloroform) due to confined conjugation, but the photoluminescence spectra remained almost the same (417–418 nm); this was attributed to oligofluorene segments. No emission of triazole fluorophores was observed because of efficient energy transfer from the triazole to oligofluorene segments. However, incomplete energy transfer was observed in CH₃COOH. The optical stability upon thermal annealing was also improved by the incorporation of aromatic triazole segments. From cyclic voltammetry results, P2 – P4 , containing triazole groups, showed greater electron affinity (lowest unoccupied molecular orbital level = ?2.67 to ?2.71 eV) than P1 (?2.52 eV). Electroluminescence devices of P1 – P4 all exhibited excimer emissions (483–521 nm), which could also be diminished by the introduction of aromatic triazole chromophores. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 136–146, 2007     

Optical and electrochemical properties of copoly(aryl ether)s consisting of alternate 2,5‐distyrylbenzene and electron‐transporting oxadiazole or triazole derivatives

New copoly(aryl ether) P1 consisting of alternate electron‐transporting 2‐(3‐(trifluoromethyl)phenyl)‐5‐(4‐(5‐(3‐(trifluoromethyl)phenyl)‐1,3,4‐oxadiazol‐2‐yl)‐2,5‐bis(hexyloxy)phenyl)‐1,3,4‐oxadiazole and hole‐transporting 2,5‐distyrylbenzene (DSB) was synthesized via nucleophilic substitution polymerization. We investigated the optical and electrochemical properties of alternate copoly(aryl ether)s P1 – P6 , which contain the same hole‐transporting DSB segments, but with different electron transporting segments. The effect of trifluoromethyl groups in electron transporting segments is also discussed. Referencing to the spectra of their model compounds M1 – M4 , the emissions of P1 – P3 are dominated exclusively by the hole‐transporting fluorophores with longer emissive wavelength about 452–453 nm via efficient excitation energy transfer. Furthermore, P1 – P3 also exhibit unique variations in energy transfer in acidic media and solvatochromism in organic solvents. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of P1 – P4 , estimated from electrochemical data, are ?5.12, ?5.15, ?5.18, ?5.00 eV and ?2.93, ?3.39, ?3.49, ?2.76 eV, respectively. The electron and hole affinity of P1 – P6 can be enhanced simultaneously by introducing isolated hole‐ and electron‐transporting segments in backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5083–5096, 2005     

Das Atomgewicht des Palladiums

Ohne Zusammenfassung