One step synthesis of 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals in an ionic liquid

Investigation of one step synthesis of 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals has been carried out using versatile aldehydes, tri- or di-fluoroacetaldehyde ethyl hemiacetal in the presence of diethylaminotrimethylsilane (DEATMS) in an ionic liquid, and it was demonstrated that this route enabled us to successfully construct 2-substituted 3-tri-(or di-)fluoromethyl-2-propenals with the high level selectivity of geometric isomers.     

Interfacial adsorption state of protonated lipophilic porphyrins in a liquid-liquid system by using reflection spectrometry.

Analysis by reflection spectrometry was performed to clarify the interfacial adsorption of protonated lipophilic tetraphenylporphyrin derivatives in a dodecane-aqueous sulfuric acid system, and to confirm the utility of partial reflection spectroscopy. Interfacial adsorption was not observed for porphyrins substituted at the 2,6 positions of meso-phenyl groups, suggesting that the substituents prevent porphyrins from forming aggregates by steric hindrance. Polymorphous J-aggregates of acid dications were produced by tetra-p-tolylporphyrin with a saturated interfacial molecular density of 1.0 x 10(-10) mol cm(-2), which could yield 48 degrees as a mean tilting angle of the pyrrole ring plane from the interface normal. Partial-reflection spectrometry can provide sensitive detection and molecular orientation analysis of interfacial adsorbates.     

Acoustic characteristics of Ni–Nb–Zr–H glassy alloys by ultrasonic shear waves

The propagation characteristics of shear horizontally polarized (SH) waves passing through (Ni₄₂Nb₂₈Zr₃₀)_100–x H_x (x = 0–15.2) glassy alloys were investigated as a function of hydrogen content. With an increase in hydrogen content, the propagation time and main frequency of the receiving waves show increase and decrease, respectively, indicating expan‐ sion in average atomic distance which comes from solution of hydrogen. In sharp contrast to crystalline alloys, the decrease in damping ratio and the delay in phase with increasing hydrogen suggest a strong settlement of hydrogen into four‐coordination sites surrounded tetrahedrally by four Zr atoms and the resulting increase in dynamic elasticity, respectively. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of a cyclodextrin dimer linked with a bis(picolinyl)cystine moiety and its intra- and intermolecular inclusion behavior

A novel cyclodextrin (CD) dimer linked with a bis(picolinyl)cystine (Cys) moiety was prepared by the coupling of Boc-protected Cys with amino-modified CDs, followed by deprotection of the Boc groups and bispicolinylation. The dimer showed less affinity to an organic guest molecule compared to that of a native CD monomer. It was attributed to an intramolecular inclusion of the pyridine moiety into CD cavity. The dimer caused significant increase of its organic guest affinity by an addition of a copper ion. The included pyridine group may come out of a CD cavity to bind the copper ion and the two CDs included cooperatively and intermolecularly a guest molecule with high affinity.     

Senecicannabine,a new pyrrolizidine alkaloid from senecio cannabifolius

The structure of senecicannabine($\text{1}$), a new mcrocyclic pyrrolizidine alkaloid isolated from $\text{Senecio cannabifolius}$, has been established by chemical study and X-ray analysis.     

Vacuum fusion determination of micro-quantities of bulk gases in low carbon iron without an effect of surface gases

Summary Vacuum Fusion Determination of Micro-quantities of Bulk Gases in Low Carbon Iron Without an Effect of Surface Gases Micro-quantities of bulk and surface oxygen and hydrogen in low carbon iron was simultaneously determined by the surface-area-variation method using vacuum fusion analysis. Among the difference of three surface treatments, silicon carbide abrasive, electropolishing and hydrogen reduction methods, bulk oxygen and hydrogen were in agreement within their errors, however, surface oxygen and hydrogen were influenced from the surface treatments. Even in the case of electropolishing, which gave the smallest surface oxygen value, bulk oxygen less than 10g/g is needed to discriminate from the surface oxygen. Bulk hydrogen of 0.03g/g was determined without the effect of surface hydrogen in the hydrogen reduction treatment.     

Inhibitory effects of 3-O-acyl-(+)-catechins on Epstein-Barr virus activation

In the course of an exploratory investigation of antitumor-promoting catechins, 3-O-acyl-(+)-catechins of varying carbon lengths from C(4) to C(18) were assessed for inhibitory effects on the activation of the Epstein-Barr virus early antigen. Like 3-O-acyl-(-)-epigallocatechins, the (+)-catechin derivatives showed promising effects with the C-3 acyl chain of C(8)-C(11) carbon atoms.     

Preparation and lithium doping of gallium oxynitride by ammonia nitridation via a citrate precursor route

Gallium oxynitride, isostructural to hexagonal gallium nitride (h-GaN), was obtained by ammonia nitridation of a precursor prepared from the addition of citric acid to an aqueous solution of gallium nitrate. Gallium oxynitride produced at 750 °C had a small amount of gallium vacancies, and was formulated as (Ga_0.89□_0.11) (N_0.66O_0.34) where the symbol □ stands for gallium vacancy. Both the gallium vacancies and oxygen substituted for nitrogen were randomly distributed within the structure. The amount of vacancies decreased with nitridation temperatures in the range of 750-850 °C. Approximately, 10 at% Li⁺ was doped into the gallium oxynitride, using a similar preparation with the additional presence of lithium nitrate, resulted in the random substitution of Ga³⁺ in an atomic ratio of Li/Ga<1 at 750 °C. Oxygen was codoped with lithium and substituted nitrogen in the wurtzite-type crystal lattice. These substitutions reduced the electrical conductivity in the gallium oxynitride semiconductor. A new oxynitride, Li₂Ga₃NO₄, was also obtained with Li₂CN₂ impurity using similar preparations from a mixture of Li/Ga?1. The crystal structure was isostructural with h-GaN, and was refined as P6₃mc with a=0.31674(1) nm, and c=0.50854(2) nm. The Ga and Li occupancies at the 2b site were refined to be 0.6085 and 0.3915, respectively, assuming that the other 2b site was randomly occupied with 1/5O and 4/5N. When the new compound was washed for over 1 min for the removal of Li₂CN₂ impurities, it was decomposed to a mixture of α-GaOOH and α-LiGaO₂. The as-prepared product with Li/Ga=1 showed the highest intensity in yellow luminescence among the products under excitation at 254 nm.     

The electrochemical behavior of ad-atoms and their effect on hydrogen evolution: Part II. Arsenic ad-atoms on platinum

The state of an arsenic layer electrodeposited at various potentials on platinum electrodes has been examined electrochemically. The relation between the state and the electrocatalytic activity for hydrogen evolution has been investigated. The number of vacant sites have been found to increase with lowering of the deposition potential. The activity has been found to depend not on the amount of deposited arsenic but on the number of vacant sites. The difference in the effects of arsenic and of copper on hydrogen evolution is pointed out. This is attributed to the difference in the affinity of the ad-atoms for hydrogen.     

Enteric solid dispersion of ciclosporin A (CiA) having potential to deliver CiA into lymphatics

Solid dispersions composed of three components, ciclosporin A (CiA), surfactant (HCO-60) and a pharmaceutical additive, were prepared. As an additive, cellulose acetate phthalate (CAP), methacrylic acid and methacrylic acid methylester copolymer (Eudragit L-100) and hydroxypropylmethylcellulose phthalate (HP-55), which are generally used as enteric coating materials, were employed. The dissolution behavior of CiA from these enteric solid-dispersion system was studied according to the paddle method of JP XI in comparison with that of Sandimmun, an olive oily CiA solution as a reference. Solid dispersion of CiA preparation did not dissolve in the 1st test fluid (pH 1.2) in 2 h. In the 2nd fluid (pH 6.8), about 80% of CiA was dissolved within 12 min, though the dissolution rate was dependent on both the quality and quantity of the additives. An in vivo systemic and lymphatic availability study was performed with rats whose carotid artery and thoracic lymph duct were cannulated. After intrastomach administration of each CiA preparation to rats at a dose of 7 mg/kg, blood and lymph samples were collected for 6 h. One of the HP-55 preparations gave the highest plasma CiA level, Cmax = 0.99 +/- 0.20 (S.E., n = 4) micrograms/ml, and also showed the highest lymphatic availability, the percentage of dose delivered to the lymphatics in 6 h was 1.98 +/- 0.10% and the maximum lymph CiA level was 76.8 +/- 12.86 micrograms/ml. Lymphatic availability of CiA from Sandimmun was 0.78 +/- 0.11% and the peak plasma CiA level was 0.46 +/- 0.10 microgram/ml.(ABSTRACT TRUNCATED AT 250 WORDS)