Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

Semi-local units modulo Gauss sums

For thep-th cyclotomic fieldk, Iwasawa proved thatp does not divide the class number of its maximal real subfield if and only if the odd part of the group of local units coincides with its subgroup generated by Jacobi sums related tok. We refine and give a quantitative version of this result for more general imaginary abelian fields. Our result is an analogy of the famous result on “semi-local units modulo cyclotomic units”. Partially supported by Grant-in-Aid for Scientific Research (C), Grant 09640054.     

Simultaneous imaging of the structure and fluorescence of a supramolecular nanostructure formed by the coupling of π‐conjugated polymer chains in the intermolecular interaction

We fabricated a micrometer‐long supramolecular chain in which π‐conjugated polyrotaxane was coupled. A new experimental setup was designed and constructed, and the simultaneous direct imaging of the structure and fluorescent function was achieved. Furthermore, we identified the formation of a polymer intertwined network and observed novel fluorescence due to a long‐range interaction via this intertwined network over a distance of 5 μm or more without quenching over 15 min in the near field. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 801–809, 2006     

Hydration Structure Around the Carboxyl Group Studied by Neutron Diffraction with 12C/13C and H/D Isotopic Substitution Methods

Time-of-Flight (TOF) neutron diffraction measurements have been carried out on aqueous 8 mol% sodium acetate solutions in D₂O. Scattering cross sections that were observed for sample solutions involving ¹²C/¹³C and H/D isotopically substituted acetate ions were used to derive the first-order difference functions, Δ_H(Q) and Δ_C(Q), and corresponding distribution functions, G _H(r;r) and G _C(r;r), which describe the environmental structure around the methyl and the carboxyl groups within the acetate ion, respectively. Structural parameters concerning the first hydration shell of the carboxyl group within the acetate ion were obtained through the least squares fit to the observed intermolecular difference function, Δ_C ^inter(Q). The nearest neighbor C _O...D _W1 (C_O: carboxyl carbon atom, D_W1: water deuterium atom) distance, r(C _O...D _W1 ), and the angle, ∠ C _O ...D _W1 -O _W (O _W : water oxygen atom), were determined to be 2.63(1) Å and 120(1)°, respectively. The coordination number, n(C _O ...D _W1 ), was obtained to be 4.0(1). These results are consistent with the hydration structure in which water molecules in the first hydration shell of the carboxyl group are hydrogen-bonded with oxygen atoms of the carboxyl group.     

Effect of adsorbed water on the electrorheology of silica suspensions

Monodisperse silica particles were formed by hydrolyzing tetraethylorthosilicate in an ethanol solution and the silica suspensions dispersed in a silicone oil were prepared by a different procedure. The effects of adsorbed water on the electrorheological (ER) behavior were studied under oscillatory shear. The amounts of adsorbed water and surface silanol groups were determined by thermogravimetric analysis. The magnitude of the complex viscosity, |η^*|, increases with the application of electric fields. The physically adsorbed water is primarily responsible for the ER effect. However, the fluids containing large amounts of adsorbed water do not always show excellent ER performance. The surface silanol groups have an important role in promoting the ER effect. Not only the amount but also the situation of silanol groups determines the ER activity of adsorbed water.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Comparison of the compact dry TC method with the standard pour plate method (AOAC official method 966.23) for determining aerobic colony counts in food samples: Performance-tested method

Compact Dry TC qualifies as a rapid method kit for determining aerobic colony counts in foods. The plates are presterilized and contain culture medium and a cold-soluble gelling agent. The medium is rehydrated by inoculating 1 mL diluted sample into the center of the self-diffusible medium and allowing the solution to diffuse by capillary action. The plates can then be incubated and the colonies counted without any additional steps. The Compact Dry TC method was validated with 5 different raw meats. The performance tests were conducted at 35 degrees and 30 degrees C. In all required performance studies, no apparent differences were observed between the Compact Dry TC method and the Standard Pour Plate method (AOAC Official Method 966.23) for the detection level of aerobic microorganisms. For the accuracy claim (n = 60), a correlation factor of r2(35) = 0.9977 (35 degrees C) and r2(30) = 0.9932 (30 degrees C) could be assigned, as stated in the application for "Performance Tested Method." Quality consistency and storage robustness studies, showed no significant variations in plate count results with different production lots or plates of diverse storage age.     

Toward inorganic electrides

Electrides are materials in which alkali metals (Li through Cs) ionize to form bound alkali cations and "excess" electrons. The electrons reside in large cavities or channels or both in the host lattice. We report here the first synthesis of thermally stable inorganic electrides with cation-to-electron ratios of 1:1 as in organic electrides. Although alkali metal adducts to alumino-silicate zeolites are well known, the cation-to-electron ratio is generally 3:1 or greater because these zeolites contain alkali cations prior to incorporation of the alkali metal. In this work, two pure silica zeolites, ITQ-4and ITQ-7, with pore diameters of approximately 7 A, absorb up to 40 wt % cesium from the vapor phase (even at room temperature). The other alkali metals (except Li) can also be introduced at elevated temperatures. The optical and magnetic properties of the cesium-loaded samples suggest ionization to form Cs+ and e- with substantial electron-spin pairing. The metal-loaded samples are stable to at least 100 degrees C and are able to reduce small aromatic molecules such as benzene and naphthalene to the radical anions within the pores of the zeolite.