Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

Analysis method of the angiotensin-I converting enzyme inhibitory activity based on micellar electrokinetic chromatography.

A micellar electrokinetic chromatography (MEKC) method was developed for estimating the angiotensin-I converting enzyme (ACE) inhibitory activity by separating the hippuric acid liberated in the ACE reaction mixture in the presence of an inhibitor, captopril. The hippuric acid was successfully separated and detected by MEKC with a 25 mM sodium dodecyl sulfate solution in a 25 mM phosphate-50 mM borate buffer at pH 7.0; the total analysis took about 5 min. A good linear relationship was observed between the inhibitor and the peak area of hippuric acid release. No significant difference in the ACE inhibitory activity (IC50) of captopril (an antihypertensive medicine) or autolyzed-mushrooms (functional foods) was observed between the conventional method and the MEKC method. The MEKC method was found to be a useful technique for a rapid assay of the ACE inhibitory activity.     

Temperature dependence of the exafs spectrum in YBa2Cu3O7−δ compounds

The temperature dependence of the extended X-ray absorption fine structure (EXAFS) is studied in the high T_c superconductors, YBa₂Cu₃O_7−δ. The measurements were done at the Cu K-edge for samples of two orthorhombic phases (T_c≈90 K and ≈58 K, respectively) and a nonsuperconducting tetragonal phase. Interatomic distances and mean square relative displacements σ² for Cu-O bonds are determined by the least squares refinement. The results indicate that values of σ² increase near T_c for both the orthorhombic samples. It is concluded that this anomalous behavior related to T_c is caused by an anomalous vibration of oxygen atoms in the Ba-O layer. Changes in the Cu-O distances from 300 to 20 K are not found.     

In situ observations of domain wall motion in Mn–Zn and Ni–Zn ferrites by Lorentz microscopy and electron holography

Domain wall motion in Mn–Zn and Ni–Zn ferrites with applied magnetic fields is investigated by in situ observations with Lorentz microscopy and electron holography. It is found that both Mn–Zn and Ni–Zn ferrites have a mean grain size of approximately 10 μm and several pores with sizes ranging from 0.2 to 1.1 μm. In situ observations by Lorentz microscopy with an applied magnetic field reveals that in Mn–Zn ferrite, the domain walls move easily across the grain boundary, while in Ni–Zn ferrite, the domain walls move along the grain boundary but are pinned at the grain boundary and pores. From in situ observations of Ni–Zn ferrite by electron holography, it is clarified that domain wall pinning at the grain boundary retards a sensitive increase in magnetic flux parallel to the applied field direction, which is considered to result in high hysteresis loss.     

Effect of annealing on structure and permeability of poly [(l-trimethylsilyl)-l-propyne]

The permeability of annealed poly (l-(trimethylsilyl)-l-propyne) was studied from the viewpoint of structural information obtained from x-ray diffraction and density. The sample cast from benzene solution had low density (0.82 g/cm³) and high permeability, whereas the annealed sample had a higher density (0.88 g/cm³) and permeability lower by two orders of magnitude. The smaller-angle x-ray diffraction peak for each sample, which was likely to reflect the distance between intermolecular chains, increased in intensity and shifted toward higher angle, corresponding to the change of the density with annealing. The logarithmic oxygen permeability was proportional to the density, namely the free volume fraction correlated with the diffusion coefficient and controlled by annealing and swelling by alcohols.     

Stability of the steady state for the Falk model system of shape memory alloys

In this article a stability result for the Falk model system is proven. The Falk model system describes the martensitic phase transitions in shape memory alloys. In our setting, the steady state is a nonlocal elliptic problem. We show the dynamical stability for the linearized stable critical point of the corresponding functional. Copyright © 2007 John Wiley & Sons, Ltd.     

Group symmetry in tensor categories and duality for orbifolds

A duality for orbifolds is presented as an application of group extensions in tensor categories.     

Uptake and excretion of total inorganic arsenic by the freshwater alga Chlorella vulgaris

Arsenic-tolerant freshwater alga Chlorella vulgaris which had been collected from an arsenicpolluted environment were tested for uptake and excretion of inorganic arsenic. Approximately half the quantity of arsenic taken up by C. vulgaris was estimated to be adhered to the extraneous coat (10 wt %) of the cell. The remainder was bioaccumulated by the cell. Both adhered and accumulated arsenic concentrations increased with an increase in arsenic(V) concentration of the aqueous phase. Arsenic(V) accumulation was affected by the growth phse: arsenic was most actively accumulated when the cell was exposed to arsenic during the early exponential phase and then accumulation decreased with an increase in culture time exposed to arsenic. The alga grew well in the modified Detmer (MD) medium containing 1 mg As(III) dm^?3 and the growth curve was approximated by a ‘logistic equation’. Arsenic(III) was accumulated up to the second day of the culture time and arsenic(III) accumulation decreased with an increase in the culture time after that. Arsenic accumulation was also largely affected by various nutrients, especially by managanese, iron and phosphorus compounds. A modified MD medium with the three nutrients was proposed for the purpose of effective removal of arsenic from the aqueous phase. Using radioactive arsenate (Na₂H⁷⁴AsO₄), the arsenic accumulated was found to be readily excreted under conditions which were unfavourable for the multiplication of C. vulgaris.     

Micro-phase sorbent extraction for trace analysis via in situ sorbent formation: application to the spectrophotometric determination of nitrite in environmental waters.

A micro-phase sorbent in situ formation from an aqueous solution was proposed for the sensitive spectrophotometric determination of nitrite in environmental waters. Nitrite in a 10 mL sample solution was converted into a cationic azo dye by the reaction with 4-trifluoromethylanilinium ion and N-1-naphthylethylenediammonium ion in an acidic medium. Addition of dodecylbenzenesulfonate ion caused the formation of a suspension of ion associate in the solution. Centrifugation of the solution led to the isolation of a liquid organic phase that extracted the azo dye at the bottom of the centrifuge tube. The volume of the new phase was ca. 5 microL. After the aqueous phase was discarded, the organic phase was dissolved with 1 mL of 2-methoxyethanol to measure the absorbance. Nitrogen as NO2- at concentrations from 1.5 to 30 microg L(-1) was determined with sufficient precision. When 0.2 mL of 2-methoxyethanol was applied to dissolve the organic phase, 0.3-4.8 microg NO2--N L(-1) was determined. The recovery tests for nitrite added to some river water and seawater were satisfactory. This method is very simple and rapid. It takes only 30 min from the dye formation to the measurement of the absorbance.