Hydrolysis of acetals in water under hydrothermal conditions

A simple method for the hydrolysis of acetals and ketals was accomplished in neutral water or aqueous media by hydrothermal treatment without using acidic reagents. The deacetalization reaction was effectively accelerated in the presence of calcium chloride. Because no acidic catalysts were employed, neutralization of the reaction mixture was not necessary after the reaction. This sequence was successfully applied to the hydrolysis of chitosan, a biodegradable polyaminosaccharide.     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

Gelation with N-lauroyl-L-glutamic-α,γ-dibutylamide for liquid scintillation counting of low specific activities of35S and32P

A gelling agent, N-lauroyl-L-glutamic-,-dibutylamide, was applied for liquid scintillation counting of inorganic³²P and³⁵S. The gel with toluene cocktail is transparent and rigid for a long time. Several grams of ammonium magnesium phosphate or barium sulfate can easily be measured without complicating procedures.     

Rheology of polystyrene solutions around the coil overlapping concentration: A phenomenological description of stresses in simple shear flow

Linear viscoelasticity behavior is described with the sum of two terms for polystyrene solutions in tricresyl phosphate around the coil overlapping concentration (K. Osaki, T. Inoue, & T. Uematsu, J Polym Sci Part B: Polym Phys 2001, 39, 211). One is a Rouse–Zimm (RZ) term represented by the Zimm theory with arbitrarily chosen values of the hydrodynamic interaction parameter and the longest relaxation time (τ_RZ). The other (the L term) consists of a relaxation mode with a single relaxation time (τ_L > τ_RZ) and a high‐frequency limiting modulus proportional to the square of the concentration. In this study, we describe the viscosity (η) and first normal stress coefficient (Ψ₁) in steady shear with simple formulas. The stress due to the L term is assumed to be given by a Kaye, Bernstein, Kearsley, and Zapas (K‐BKZ) equation with the damping function h(γ) = (1 + 0.2γ²)^?1/2, where γ is the magnitude of shear. Contributions to η and Ψ₁ from the RZ term are derived from the RZ model, in which the relaxation time in steady flow is given by τ_st = τ + (τ_RZ ? τ)/(1 + 0.35τ_RZ γ˙) instead of τ_RZ. Here, γ˙ is the rate of shear, and τ is the τ_RZ value at the infinite dilution limit. η and Ψ₁ at various concentrations for two polystyrene samples (with molecular weights of 2890 and 8420 kg mol^?1) are well described with parameters derived from dynamic viscoelasticity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1038–1045, 2002     

Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

A Selective Synthesis of 3,3-Di-C-(hydroxymethyl)-3-deoxy-furanorono-1,4-lactone in the Formose Reaction

Abstract

The formose reaction, by which a complex mixture of sugars and sugar alcohols (the so-called formose) are produced by the base-catalyzed condensation of formaldehyde, has received much attention in connection with the prebiotic synthesis of carbohydrates² and the microbial utilization of formose.^3–5 Formose, however, has not been useful yet, because of the complexity of this product mixture (Fig. 1a). Therefore, it seemed desirable to make the reaction more selective.     

First Synthesis of DL-2-C-Hydroxymethyl-3-Pentulose in the Formose Reaction

Abstract

The formose reactions² in N,N-dimethylformamide (DMF) catalyzed by 2-(dimethylamino)ethanol and thiamine hydrochloride, have been found to give rise to dihydroxyacetone and DL-glycero-tetrulose selectively at 1.1 M and 3.0 M of formaldehyde concentration, respectively. In our consecutive study on the formose reaction in DMF, it has been fortunately found that the distribution of products is able to be controlled by the amount of water added to the reaction mixture. We describe herein the first example of the favored formation of DL-2-C-hydroxymethyl-3-pentu-lose (GP-19¹) in the formose reaction using DMF-H₂O solvent, and it's isolation and structure elucidation.     

Kinetic studies of CO2dissociation on supported Ni catalysts

Summary In order to investigate the kinetics of CO₂dissociation on supported nickel catalysts, a novel technique, which can give the surface reaction rate constants with no information on the number of active sites, was developed. It was revealed that CO₂dissociation was more enhanced on TiO₂support than on other metal oxide ones. The activity pattern and activation energies were in good agreement with those obtained by a conventional pulse technique using the number of active sites, suggesting the validity of the present technique for investigating the kinetics of the surface reaction.</o:p>