WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

Direct determination of brucine by square wave voltammetry on 4-amino-2-mercaptopyrimidine self-assembled monolayer gold electrode

4-Amino-2-mercaptopyrimidine self-assembled monolayer (AMP SAMs/Au) was prepared on a gold electrode. The AMP SAMs/Au was characterized by using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. Impedance. The electrochemical behavior of brucine on AMP SAMs/Au was studied by cyclic voltammetry (CV) and square wave adsorptive stripping voltammetry (SWASV). The modified electrode showed an excellent electrocatalytic activity for the redox of brucine. The catalytic current increased linearly with the concentration of brucine in the range of 4.0 x 10(-7) to 2.0 x 10(-4) mol l(-1) by square wave voltammetry response. The detection limit was 6.0 x 10(-8) mol l(-1).     

烷氧桥相连的四苯基双金属卟啉配合物的红外光谱研究

研究了烷氧桥相连的四苯基双卟啉及其Ｍｎ（Ⅱ），Ｆｅ（Ⅲ），Ｃｏ（Ⅱ）配合物的红外光谱（３６００～１５０ｃｍ＾－１），对一些主要吸收谱带进行了经验归属，金属敏感谱带出现１５５８．２（以Ｈ２Ｐ－Ｈ２Ｐ为例）、１４７７．２，１４０１．９，１３５０．５，１００１．７，９６５．９，８７７．３和７９８．８ｃｍ＾－１附近，金属和烷氧桥都敏感的谱带出现在１５９５．１（以Ｈ２Ｐ为例）、１４９１．１，８５１．１和７２     

Voltammetric determination of levofloxacin using a glassy carbon electrode modified with poly(o-aminophenol) and graphene quantum dots

A strategy was developed for the voltammetric determination of the antibiotic drug levofloxacin (LV) based on a glassy carbon electrode modified with a composite consisting of poly(o-aminophenol) and graphene quantum dots (PoAP/GQD) that was fabricated by electropolymerization. The PoAP/GQD composite provides a large surface area and sensing interface and strongly promotes the oxidation current of LV. Under optimal conditions, the modified GCE displays an oxidation peak current (best measured at a working voltage of 1.05 V vs. SCE) that is linearly related to the levofloxacin concentration in the range from 0.05 to 100 μM, and the detection limit is 10 nM (at an S/N of 3). The method was applied to the determination of levofloxacin in spiked milk samples where is gave recoveries between 96.0 and 101.0 %.

Open image in new window

Graphical Abstract We describe a one-step electrochemical polymerization method to synthesize a layer of conductive film of poly(o-aminophenol) and graphene quantum dots (PoAP/GQD) onto a glassy carbon electrode (GCE) surface. The composite film exhibited high electro catalytic activity for the quantitative determination of levofloxacin by stripping voltammetry.

     

磁性Y-MOF@SiO2@Fe3O4催化剂的制备及其在Aza-Micheal加成反应中的性能

在磁性SiO₂@Fe₃O₄纳米微球表面原位合成包覆不同含量的Y-MOF,从而制备出新型磁性Y-MOF@SiO₂@Fe₃O₄催化剂。采用XRD、TEM、FT-IR、VSM和N₂吸附-脱附测试等手段对催化剂的结构进行表征,并且评价了催化剂对苯胺和丙烯酸甲酯的Aza-Micheal加成反应性能。结果表明Y-MOF能均匀包覆在磁性SiO₂@Fe₃O₄纳米微球表面,形成具有核壳结构的磁性Y-MOF@SiO₂@Fe₃O₄催化剂,催化剂具有良好的超顺磁性。Y-MOF含量为43.3%（w/w）的Y-MOF@SiO₂@Fe₃O₄催化剂,在苯胺和丙烯酸甲酯的Aza-Micheal加成反应表现出最好的催化性能,丙烯酸甲酯的转化率为88.3%时,N-（β-甲氧碳酰乙基）苯胺的选择性可达99.8%。反应后的催化剂可以通过外磁场容易回收,并且重复使用5次其转化率和选择性没有明显下降。     

Direct electrochemistry and electrocatalytic characteristic of heme proteins immobilized in a new sol-gel polymer film

Heme proteins were immobilized on glass carbon electrodes by poly (N-isopropylac-yamide-co-3-methacryloxy-propyl-trimethoxysilane) (PNM) and exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks at about -0.35 V versus a saturated calomel electrode in pH 7.0 buffer solution, corresponding to hemeFe(III)+e-->hemeFe(II). Some electrochemical parameters were calculated by performing nonlinear regression analysis of square wave voltammetry (SWV) experimental data. The formal potential was linearly dependent on pH, indicating the electron transfer of Fe(III)/Fe(II) redox couple accompanied by the transfer of proton. Ultraviolet visible and Fourier transform infrared spectra suggested that the conformation of proteins in the PNM films retained the essential feature of its native secondary structure. Atomic force microscopy images demonstrated the existence of interaction between heme proteins and PNM. N,N-dimethylformamide (DMF) played an important role in immobilizing proteins and enhancing electron transfer between proteins and electrodes. Electrochemical catalytic reductions of hydrogen peroxide and trichloroacetic acid by proteins entrapped in PNM film were also discussed, showing the potential applicability of the film modified electrodes as a biosensor.     

Electrocatalytic Oxidation and Direct Determination of L-Tyrosine by Square Wave Voltammetry at Multi-wall Carbon Nanotubes Modified Glassy Carbon Electrodes

The electrochemical behavior of L-tyrosine was investigated at a multi-wall carbon nanotubes modified glassy carbon electrode. L-tyrosine itself showed a poor electrochemical response at the bare glassy carbon electrode; however, a multi-wall carbon nanotubes film fabricated on the glassy carbon electrode can directly enhance the electrochemical signal of L-tyrosine when applying cyclic voltammetry and square wave stripping voltammetry without any mediator. Cyclic voltammetry was carried out to study the electrochemical oxidation mechanism of L-tyrosine, which shows a totally irreversible process and an oxidation potential of 671 mV at the modified electrode and 728 mV at the bare electrode, ΔE_p = 57 mV. The anodic peak current linearly increases with the square root of scan rate in the low range, suggesting that the oxidation of L-tyrosine on the multi-wall carbon nanotubes modified electrode is a diffusion-controlled process. The square wave stripping voltammetry currents of L-tyrosine at the multi-wall carbon nanotubes modified electrodes increased linearly with the concentration in the range of 2.0 × 10⁻⁶–5.0 × 10⁻⁴ mol L⁻¹. The detection limit was 4.0 × 10⁻⁷ mol L⁻¹. The method is simple, quick, sensitive and accurate.     

Efficient Pyrazolo[5,4-f]quinoxaline Functionalized Os(II) Based Emitter with an Electroluminescence Peak Maximum at 811 nm

Upon fusing the pyrazinyl pyrazole entity in giving pyrazolo[3,4-f]quinoxaline chelate, the corresponding Os(II) based NIR emitter exhibited “invisible” and efficient electroluminescence with a peak maximum at 811 nm. A maximum external quantum efficiency of 0.97 % and a suppressed efficiency roll-off till a current density of 300 mA cm⁻² was also exhibited.     

Cu_xCo_(1-x)/Al_2O_3/FeCrAl整体式催化剂上甲苯催化燃烧(英文)

以FeCrAl合金薄片为基底,Al2O3浆料为过渡胶体,不同摩尔比的Cu、Co为催化活性组分,制备了一系列CuxCo1-x/Al2O3/FeCrAl(x=0-1)新型整体式催化剂.采用X射线粉末衍射(XRD),扫描电子显微镜(SEM),X光电子能谱(XPS)和程序升温还原(TPR)等手段对催化剂的结构进行了表征.在微型固定床反应器上评价了催化剂的催化甲苯燃烧性能.研究结果表明:在所制备的整体式催化剂上,当Cu含量比较低时,形成了Cu-Co-O固溶体;当Cu含量比较高时,可以测得CuO的衍射峰.催化剂表面颗粒大小和形貌与Cu、Co摩尔比密切相关.在催化剂表面,Co以Co2+和Co3+价态存在,而Cu主要以Cu2+价态存在.催化剂中的Cu可以改善Co的氧化还原性,从而有利于催化剂活性的提高.在所制备的催化剂中,Cu0.5Co0.5/Al2O3/FeCrAl催化剂具有最好的活性,甲苯在374oC可以完全催化燃烧消除.     

聚合物纳米粒子的制备及其新型物理水凝胶结构的AFM和SEM研究

凝胶材料是生物系统的重要组成物质,在生物模拟、仿生等方面具有重大意义.最近凝胶方面的研究日益受到关注^[1,2],高分子凝胶体系的研究也得到深入开展^[3,4].在智能水凝胶、凝胶特性基础研究和医用凝胶材料等领域已取得了较大进展.