Kinetic study of the oxidation of ethanol by 3,4-lutidine chromium(VI) peroxide in dichloromethane solution

The oxidation kinetics of ethanol with 3,4-lutindine chromium(VI) peroxide (LCP) were investigated by monitoring the absorbance change at 565 nm in dichloromethane solution. The reaction had a first-order dependence on oxidant and a fractional (one half) dependence on reactant. The stoichiometric ratio between LCP and ethanol was 1 : 2. The activation parameters were determined from temperature dependence of the reaction rate. It was found that the cleavage of the peroxide groups of LCP is primarily responsible for the oxidant of ethanol to acetaldehyde. Based on the kinetic results obtained (including deuterium isotope effect) a plausible mechanism is proposed. © 1994 John Wiley & Sons, Inc.     

A new dodecylsulfate-selective supported liquid membrane electrode based on its N-cetylpyridinium ion-pair

A supported liquid and a poly(vinyl chloride) (PVC)-based membrane selective for dodecylsulfate (DS⁻) ion are described. The active element is a membrane containing a dissolved ion association complex of DS⁻ with cetylpyridinium (CP⁺) cation. The supported liquid membrane electrode (acetophenone as solvent) showed a Nernstian response towards the DS⁻ anion over the concentration range of sodium dodecylsulfate (SDS) from 8.3×10⁻³ to 1.0×10⁻⁶ mol dm⁻³ at 25 °C. The proposed electrode also showed a super-Nernstian potential response (108±2 mV decade⁻¹) at low concentrations (1.0×10⁻⁹ to 1.0×10⁻⁶ mol dm⁻³). Moreover, this electrode showed good selectivity and precision (R.S.D.?2.0%), and was usable within the pH range 4.0-6.8. The proposed electrode revealed a lower limit of detection of 6.3×10⁻⁷ mol dm⁻³ and improved selectivity in comparison with the some previously reported DS⁻ ion selective electrodes. The isothermal temperature coefficient of this electrode amounted to −0.001 V °C⁻¹. The liquid membrane electrode may find application in the direct determination of SDS by the standard addition method at pH 5.0, and in the physicochemical studies of surfactant solutions.     

Chemical composition and antimicrobial activity of the essential oils of Ferula latisecta and Mozaffariania insignis from Iran

The hydrodistilled oils from the aerial parts of Ferula latisecta and Mozaffariania insignis, which is endemic to Iran, were analyzed by GC and GC/MS. (Z)-Ocimenone (32.4%), (E)-ocimenone (20.3%), and cis-pinocarvone (11.4%) were the main components among the 22 constituents characterized in the oil of F. latisecta, representing 87.7% of the total components detected. Twenty-five compounds were identified in the oil of M. insignis, representing 99.0% of the total oil, with octyl acetate (41.1%), β-pinene (30.3%), and α-pinene (23.9%) as the main constituents. The essential oils were examined for their potential antimicrobial activities. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2006.     

Acid-induced gelation behavior of sonicated casein solutions

Casein gels were made from solutions sonicated by 24 and 130 kHz ultrasounds for 0, 60 and 120 min, followed by acidification with glucono-δ-lactone at 30 °C. The dynamics of gel formation were studied using rheological methods and microstructure of gels was monitored using scanning electron microscopy. Sonication postponed the gelation point to a lower pH value and increased the elasticity of freshly formed gels. It also resulted in gels with a more interconnected structure and smaller non-distinguishable particulates. This structure was especially dominant for the gel made from the solution already sonicated for 120 min.     

Study of size, type and the kerma approximation for thermoluminescent dosimetry

This study aimed to investigate effects of the thermoluminescent dosimeter (TLD) size and type on the absorbed dose value by using of Monte Carlo calculations. The options in creating conditions to establish the kerma approximation were also studied. The Monte Carlo N-Particle (MCNPX 2.4.0) transport code was used to design simulations. Results of this work indicate that if common mineral materials of TLDs are replaced by air and a huge volume is applied for the TLD, the accurate assessment of absorbed doses is possible while the photon energy fluence in the TLD cell is convoluted with mass energy absorption coefficients of the real TLD material. In this method the simulation run-time is strongly decreased.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

Surface modification of cellulose nanocrystal with chitosan oligosaccharide for drug delivery applications

A novel drug delivery system based on two of the most abundant natural biopolymers was developed by modifying the surface of oxidized cellulose nanocrystal (CNC) with chitosan oligosaccharide (CS_OS). First, the primary alcohol moieties of CNC were selectively oxidized to carboxyl groups using the 2,2,6,6-tetramethylpiperidine-1-oxyl radical catalyst. The amino groups of CS_OS were then reacted with carboxylic acid groups on oxidized CNC (CNC-OX) via the carbodiimide reaction using N-hydroxysuccinimide and 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide as coupling agents. Successful grafting of CS_OS to CNC-OX was confirmed by infrared spectroscopy, thermogravimetry, potentiometric titration, and zeta potential measurements. The grafting resulted in a conversion of ~90 % carboxyl groups on CNC-OX and the degree of substitution was 0.26. CNC–CS_OS nanoparticles showed a binding efficiency of 21.5 % and a drug loading of 14 % w/w. A drug selective electrode was used to directly measure the concentration of procaine hydrochloride released from CNC–CS_OS particles. The in vitro drug release was studied at pH 8 and the nanoparticles revealed a fast release of up to 1 h, which can be used as biocompatible and biodegradable drug carriers for transdermal delivery applications.     

Stability and Rheological Properties of Suspended Pulp Particles Containing Orange Juice Stabilized by Gellan Gum

Gellan was used to suspend pulp particles in orange juice. Three groups of samples were prepared with 0%, 20%, and 40% orange juice concentrate and supplemented with gellan at different concentrations. A concentration-dependent increase in the size of gellan aggregates and gellan-protein assemblies was observed. Incorporation of gellan into the beverage with 0% juice concentrate changed the rheological behavior of sample to non-Newtonian shear-thinning fluid and increased its surface tension. When juice concentrate proportion was increased from 0% to 20%, the beverage viscosity increased. The highest gellan concentration resulted in a higher yield stress (σ₀) value and inhibited the pulp sedimentation completely.      

Effect of Process Variable on the Gelation Time of Sulfonated Polyacrylamide Nanocomposite Hydrogel

Among the methods available to reduce water production during oil recovery, injecting a gelling system composed of a polymer and a crosslinker has been widely used. In this study, a Plackett-Burman design was used for screening a large number of factors such as concentrations of polymer, crosslinker, pH, temperature, and presence or absence of NaCl, CaCl₂, MgCl₂, KCl, thiourea, sodium lactate, and nanoclay on the gelation time of sulfonated polyacrylamide nanocomposite hydrogels by rheological tests. Among these factors, temperature, pH, and CaCl₂ concentration were found to have the greatest effect on the gelation time. The effects of these three factors and their interactions on the gelation time were then determined by using central composite design of response surface method. As a result, the interactions of CaCl₂ concentration with temperature and pH were considerably more than the interactions of pH and temperature on the gelation time. At low pH (3 < pH < 7), the gelation time decreased by decrease of pH while at CaCl₂ concentration of 3750–11250 ppm and at 7 < pH < 11, the gelation time increased with the increase of pH. It was found that temperature was the most effective parameter to control the gelation time.     

Analytical quality solid-state composite reference electrode manufactured by injection moulding

An injection moulding method was used for fabricating solid-state reference electrodes (Ag/AgCl type) based on a polymer/inorganic salt composite. In this method, a silver/silver chloride wire was placed inside a mould into which the mixture of polymer and inorganic salt was injected. The obtained solid-state composite reference electrodes were extensively tested to study the influence of different parameters such as solution composition, the concentrations and mobility of ions and pH on the potential stability of the electrodes. These experiments revealed that the composite reference electrodes are insensitive to the matrix effect, have excellent potential readings stability and considerably reduced leakage of inorganic salt. The composite reference electrodes were compared favourably to high-quality commercial reference electrodes. It was concluded that the composite reference electrodes obtained by injection moulding are of analytical quality allowing for continuous, prolonged and intensive usage.